Benchmark #58354 - pibenchmarks.com

Brand: Yucun R580 mSATA Series
SSD (mSATA)
#633 / 1,679
11
#863 / 1,679
#824 / 984
#43 / 69
4,884
	Amazon.com Amazon.ca Amazon.co.uk Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se

Overview
2022-03-28 02:01:47
#58,354
2,842
-2,042 (-71.85%)
Anonymous
USB3

Storage Details
Yucun R580 mSATA Series
SSD (mSATA)
240G
SSD
Yucun
SH00M240GB
2.5 inch
SATA
2.10
480
2109:0229
0x2109
0x0229
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
ARMv7 v7l
4
1,500
500
4 GB
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
28.7 MB/s
10.24 MB/s
10.11 MB/s
4,467 IOPS
4,505 IOPS
17,870 KB/s
18,020 KB/s
12,634 KB/s
11,155 KB/s
10,729 KB/s
12,621 KB/s

inxi Results
System: Host: rhasspy Kernel: 5.10.17-v7l+ arch: armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=9b5c0be8-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: Openbox v: 3.6.1 info: lxpanel dm: LightDM v: 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2711 rev: c03111 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.81 GiB used: 555.8 MiB (14.2%) gpu: 76 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 3 Topology: cpus: 1x cores: 4 smt: N/A cache: N/A Speed (MHz): avg: 600 min/max: 600/1500 scaling: driver: cpufreq-dt governor: ondemand cores: 1: 600 2: 600 3: 600 4: 600 bogomips: 1080 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: X.Org v: 1.20.4 compositor: xcompmgr driver: X: loaded: modesetting unloaded: fbdev gpu: vc4-drm,vc4_crtc,vc4_dpi,vc4_dsi,vc4_firmware_kms,vc4_hdmi,vc4_hvs,vc4_txp,vc4_v3d,vc4_vec display-ID: :0.0 screens: 1 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93") Monitor-1: HDMI-A-1 mapped: HDMI-1 model: Samsung SyncMaster built: 2009 res: 1920x1080 hz: 60 dpi: 305 gamma: 1.2 chroma: red: x: 0.651 y: 0.337 green: x: 0.290 y: 0.612 blue: x: 0.145 y: 0.071 white: x: 0.314 y: 0.329 size: 160x90mm (6.3x3.54") diag: 184mm (7.2") ratio: 16:9 modes: 1920x1080, 1920x1080i, 1600x1200, 1680x1050, 1280x1024, 1440x900, 1280x960, 1280x800, 1280x720, 1024x768, 800x600, 720x576, 720x480, 640x480 Message: Unable to show GL data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-2: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.17-v7l+ running: yes Sound Server-2: PulseAudio v: 12.2 running: no Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: up mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: noprefixroute scope: global broadcast: 192.168.X.X IP v6: fe80::84fa:1c68:db5e:27cc/64 scope: link Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: down mac: XX:XX:XX:XX:XX:XX IF-ID-1: docker0 state: down mac: XX:XX:XX:XX:XX:XX IP v4: 172.17.X.X/16 scope: global broadcast: 172.17.X.X WAN IP: 82.216.X.X Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: down bt-service: enabled,running rfk-block: hardware: no software: yes address: XX:XX:XX:XX:XX:XX Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 223.57 GiB used: 25.06 GiB (11.2%) SMART Message: Required tool smartctl not installed. Check --recommends ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Smart Modular Tech. model: SH00M240 GB size: 223.57 GiB block-size: physical: 4096 B logical: 512 B type: N/A rev: S092 scheme: MBR Message: No optical or floppy data found. Partition: ID-1: / raw-size: 17.58 GiB size: 16.31 GiB (92.74%) used: 15.53 GiB (95.2%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: SSD uuid: 3ee2039a-daa8-49dd-96e9-94cec6a9f83e ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 47.7 MiB (18.9%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: N/A uuid: 23E9-2BF0 ID-3: /media/pi/extend raw-size: 205.73 GiB size: 201.51 GiB (97.94%) used: 9.48 GiB (4.7%) fs: ext4 block-size: 4096 B dev: /dev/sda3 maj-min: 8:3 label: extend uuid: 5a3c62a9-a894-4b3c-94ee-492334283a4d Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 27 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.2:3 info: Hitachi mSATA Adapter [renkforce Pi-102] type: Mass Storage driver: uas interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 2mA chip-ID: 045b:0229 class-ID: 0806 Device-2: 1-1.4:4 info: Primax type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s power: 100mA chip-ID: 0461:4e2a class-ID: 0301 Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 1773 lib: 944 Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https://download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/nodesource.list 1: deb [signed-by=/usr/share/keyrings/nodesource.gpg] https://deb.nodesource.com/node_10.x buster main 2: deb-src [signed-by=/usr/share/keyrings/nodesource.gpg] https://deb.nodesource.com/node_10.x buster main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/seeed.list 1: deb https://seeed-studio.github.io/pi_repo/ stretch main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 180 1: cpu: 12.2% command: cups-browsed pid: 589 mem: 10.0 MiB (0.2%) 2: cpu: 4.2% command: cupsd pid: 417 mem: 15.1 MiB (0.3%) 3: cpu: 2.6% command: python3 pid: 14303 mem: 16.3 MiB (0.4%) 4: cpu: 2.5% command: xorg pid: 724 mem: 87.9 MiB (2.2%) 5: cpu: 2.2% command: init pid: 1 mem: 8.25 MiB (0.2%) Memory top: 5 of 180 1: mem: 87.9 MiB (2.2%) command: xorg pid: 724 cpu: 2.5% 2: mem: 61.2 MiB (1.6%) command: dockerd pid: 651 cpu: 0.9% 3: mem: 49.2 MiB (1.2%) command: lxterminal pid: 4562 cpu: 1.4% 4: mem: 33.8 MiB (0.8%) command: containerd pid: 627 cpu: 0.2% 5: mem: 30.4 MiB (0.7%) command: vncserver-x11-core pid: 633 cpu: 1.6% Info: Processes: 180 Uptime: 3m Init: systemd v: 241 runlevel: 5 target: graphical.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Shell: Bash (sudo) v: 5.0.3 running-in: lxterminal inxi: 3.3.14

inxi Results

System:
  Host: rhasspy Kernel: 5.10.17-v7l+ arch: armv7l bits: 32 compiler: N/A
    parameters: coherent_pool=1M 8250.nr_uarts=0
    snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1
    video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX
    vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000
    console=ttyS0,115200 console=tty1 root=PARTUUID=9b5c0be8-02
    rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash
    plymouth.ignore-serial-consoles
  Desktop: Openbox v: 3.6.1 info: lxpanel dm: LightDM v: 1.26.0
    Distro: Raspbian GNU/Linux 10 (buster)
Machine:
  Type: ARM System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2711
    rev: c03111 Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 3.81 GiB used: 555.8 MiB (14.2%) gpu: 76 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l
    family: 7 model-id: 0 stepping: 3
  Topology: cpus: 1x cores: 4 smt: N/A cache: N/A
  Speed (MHz): avg: 600 min/max: 600/1500 scaling: driver: cpufreq-dt
    governor: ondemand cores: 1: 600 2: 600 3: 600 4: 600 bogomips: 1080
  Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb
    tls vfp vfpd32 vfpv3 vfpv4
  Vulnerabilities: No CPU vulnerability/bugs data available.
Graphics:
  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu
    class-ID: gpu
  Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc
    class-ID: hdmi
  Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc
    class-ID: hdmi
  Display: server: X.Org v: 1.20.4 compositor: xcompmgr driver: X:
    loaded: modesetting unloaded: fbdev
    gpu: vc4-drm,vc4_crtc,vc4_dpi,vc4_dsi,vc4_firmware_kms,vc4_hdmi,vc4_hvs,vc4_txp,vc4_v3d,vc4_vec
    display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22")
    s-diag: 582mm (22.93")
  Monitor-1: HDMI-A-1 mapped: HDMI-1 model: Samsung SyncMaster
    built: 2009 res: 1920x1080 hz: 60 dpi: 305 gamma: 1.2
    chroma: red: x: 0.651 y: 0.337 green: x: 0.290 y: 0.612 blue: x: 0.145
    y: 0.071 white: x: 0.314 y: 0.329 size: 160x90mm (6.3x3.54")
    diag: 184mm (7.2") ratio: 16:9 modes: 1920x1080, 1920x1080i, 1600x1200,
    1680x1050, 1280x1024, 1440x900, 1280x960, 1280x800, 1280x720, 1024x768,
    800x600, 720x576, 720x480, 640x480
  Message: Unable to show GL data. Required tool glxinfo missing.
Audio:
  Device-1: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc
    class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc
    class-ID: hdmi
  Sound Server-1: ALSA v: k5.10.17-v7l+ running: yes
  Sound Server-2: PulseAudio v: 12.2 running: no
Network:
  Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A
    chip-ID: brcm:fe300000 class-ID: mmcnr
  IF: wlan0 state: up mac: XX:XX:XX:XX:XX:XX
  IP v4: 192.168.X.X/24 type: noprefixroute scope: global
    broadcast: 192.168.X.X
  IP v6: fe80::84fa:1c68:db5e:27cc/64 scope: link
  Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
    chip-ID: brcm:fd580000 class-ID: ethernet
  IF: eth0 state: down mac: XX:XX:XX:XX:XX:XX
  IF-ID-1: docker0 state: down mac: XX:XX:XX:XX:XX:XX
  IP v4: 172.17.X.X/16 scope: global broadcast: 172.17.X.X
  WAN IP: 82.216.X.X
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000
    class-ID: serial
  Report: hciconfig ID: hci0 rfk-id: 1 state: down
    bt-service: enabled,running rfk-block: hardware: no software: yes
    address: XX:XX:XX:XX:XX:XX
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff
    link-mode: slave accept
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 223.57 GiB used: 25.06 GiB (11.2%)
  SMART Message: Required tool smartctl not installed. Check --recommends
  ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Smart Modular Tech.
    model: SH00M240 GB size: 223.57 GiB block-size: physical: 4096 B
    logical: 512 B type: N/A     rev: S092 scheme: MBR
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 17.58 GiB size: 16.31 GiB (92.74%)
    used: 15.53 GiB (95.2%) fs: ext4 block-size: 4096 B dev: /dev/sda2
    maj-min: 8:2 label: SSD uuid: 3ee2039a-daa8-49dd-96e9-94cec6a9f83e
  ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%)
    used: 47.7 MiB (18.9%) fs: vfat block-size: 512 B dev: /dev/sda1
    maj-min: 8:1 label: N/A uuid: 23E9-2BF0
  ID-3: /media/pi/extend raw-size: 205.73 GiB size: 201.51 GiB (97.94%)
    used: 9.48 GiB (4.7%) fs: ext4 block-size: 4096 B dev: /dev/sda3
    maj-min: 8:3 label: extend uuid: 5a3c62a9-a894-4b3c-94ee-492334283a4d
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 27 MiB used: 0 KiB (0.0%) priority: -2
    file: /var/swap
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0
    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s
    power: 100mA chip-ID: 2109:3431 class-ID: 0900
  Device-1: 1-1.2:3 info: Hitachi mSATA Adapter [renkforce Pi-102]
    type: Mass Storage driver: uas interfaces: 1 rev: 2.1 speed: 480 Mb/s
    power: 2mA chip-ID: 045b:0229 class-ID: 0806
      Device-2: 1-1.4:4 info: Primax type: Mouse driver: hid-generic,usbhid
    interfaces: 1 rev: 2.0 speed: 1.5 Mb/s power: 100mA chip-ID: 0461:4e2a
    class-ID: 0301
  Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s
    chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
  Missing: Required tool sensors not installed. Check --recommends
Repos:
  Packages: apt: 1773 lib: 944
  Active apt repos in: /etc/apt/sources.list
    1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
  Active apt repos in: /etc/apt/sources.list.d/docker.list
    1: deb [arch=armhf] https://download.docker.com/linux/raspbian buster stable
  Active apt repos in: /etc/apt/sources.list.d/nodesource.list
    1: deb [signed-by=/usr/share/keyrings/nodesource.gpg] https://deb.nodesource.com/node_10.x buster main
    2: deb-src [signed-by=/usr/share/keyrings/nodesource.gpg] https://deb.nodesource.com/node_10.x buster main
  Active apt repos in: /etc/apt/sources.list.d/raspi.list
    1: deb http://archive.raspberrypi.org/debian/ buster main
  Active apt repos in: /etc/apt/sources.list.d/seeed.list
    1: deb https://seeed-studio.github.io/pi_repo/ stretch main
  No active apt repos in: /etc/apt/sources.list.d/vscode.list
Processes:
  CPU top: 5 of 180
  1: cpu: 12.2% command: cups-browsed pid: 589 mem: 10.0 MiB (0.2%)
  2: cpu: 4.2% command: cupsd pid: 417 mem: 15.1 MiB (0.3%)
  3: cpu: 2.6% command: python3 pid: 14303 mem: 16.3 MiB (0.4%)
  4: cpu: 2.5% command: xorg pid: 724 mem: 87.9 MiB (2.2%)
  5: cpu: 2.2% command: init pid: 1 mem: 8.25 MiB (0.2%)
  Memory top: 5 of 180
  1: mem: 87.9 MiB (2.2%) command: xorg pid: 724 cpu: 2.5%
  2: mem: 61.2 MiB (1.6%) command: dockerd pid: 651 cpu: 0.9%
  3: mem: 49.2 MiB (1.2%) command: lxterminal pid: 4562 cpu: 1.4%
  4: mem: 33.8 MiB (0.8%) command: containerd pid: 627 cpu: 0.2%
  5: mem: 30.4 MiB (0.7%) command: vncserver-x11-core pid: 633 cpu: 1.6%
Info:
  Processes: 180 Uptime: 3m Init: systemd v: 241 runlevel: 5
  target: graphical.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8
  Shell: Bash (sudo) v: 5.0.3 running-in: lxterminal inxi: 3.3.14

Benchmark #58354 - Brand: Yucun R580 mSATA Series