Benchmark #58520 - pibenchmarks.com

Brand: Panasonic SD
A1 C10 U1
#124 / 1,679
144
#1,363 / 1,679
#229 / 394
1,097
	Amazon.com Amazon.co.uk Amazon.com.au Amazon.de Amazon.es Amazon.it Amazon.nl

Overview
2022-04-01 10:18:02
#58,520
1,173
+76 (+6.48%)
Anonymous
sd card

Secure Digital (SD) Card Details
Panasonic SD
A1 C10 U1
28.7G
SD
Panasonic
Y032V
SD
6.00
0x01
PA
1.3
03/2020
Class 10
A1
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.5
Raspberry Pi 4 Model B Rev 1.5
Raspberry Pi Foundation
ARMv7 v7l
4
1,800 (+300)
500
2 GB
50

Operating System

Raspbian GNU/Linux 11 (bullseye)
armv7l

Benchmark Results
29.8 MB/s
42.32 MB/s
41.89 MB/s
617 IOPS
2,582 IOPS
2,469 KB/s
10,331 KB/s
10,737 KB/s
2,453 KB/s
8,880 KB/s
2,242 KB/s

inxi Results
System: Host: malinko Kernel: 5.15.30-v7l+ arch: armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=62e5118c-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: pty pts/0 DM: LightDM v: 1.26.0 Distro: Raspbian GNU/Linux 11 (bullseye) Machine: Type: ARM System: Raspberry Pi 4 Model B Rev 1.5 details: BCM2711 rev: b03115 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 1.9 GiB used: 394.1 MiB (20.2%) gpu: 76 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 3 Topology: cpus: 1x cores: 4 smt: N/A cache: N/A Speed (MHz): avg: 1800 min/max: 600/1800 scaling: driver: cpufreq-dt governor: ondemand cores: 1: 1800 2: 1800 3: 1800 4: 1800 bogomips: 1296 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Not affected Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: X.org v: 1.20.11 compositor: Mutter v: 3.38.6 driver: X: loaded: modesetting unloaded: fbdev gpu: vc4_hdmi,vc4_hdmi,vc4_drm tty: 195x55 Message: Unable to show GL data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Sound Server-1: ALSA v: k5.15.30-v7l+ running: yes Sound Server-2: PulseAudio v: 14.2 running: yes Sound Server-3: PipeWire v: 0.3.19 running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: down mac: XX:XX:XX:XX:XX:XX Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 scope: global broadcast: 192.168.X.X IP v6: fe80::f7ad:5821:8a42:396c/64 scope: link WAN IP: 46.126.X.X Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: XX:XX:XX:XX:XX:XX bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept service-classes: rendering, capturing, audio Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 960.43 GiB used: 6.86 GiB (0.7%) ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: Maxtor model: Y032V size: 28.91 GiB block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Samsung model: Portable SSD T3 size: 931.51 GiB block-size: physical: 512 B logical: 512 B type: SSD scheme: GPT SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No optical or floppy data found. Partition: ID-1: / raw-size: 28.66 GiB size: 28.15 GiB (98.23%) used: 3.66 GiB (13.0%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs uuid: e603363f-79c3-421f-a49e-3c01c0a6dd23 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 49.2 MiB (19.5%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: 6ED3-22D6 ID-3: /mnt/tmp raw-size: 931.39 GiB size: 915.69 GiB (98.31%) used: 3.15 GiB (0.3%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: N/A uuid: 32b37651-5fec-4840-aac9-e8e9c2133a1f Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 24.2 MiB (24.3%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/sda1 maj-min: 8:1 size: 128 MiB fs: N/A label: N/A uuid: N/A USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-1:3 info: Samsung Portable SSD T3 (MU-PT250B MU-PT500B) type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 896mA chip-ID: 04e8:61f3 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 1398 lib: 742 Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ bullseye main Processes: CPU top: 5 of 195 1: cpu: 2.7% command: smbd pid: 1203 mem: 14.9 MiB (0.7%) 2: cpu: 0.6% command: [kworker/u8:0-events_unbound] pid: 1763 mem: 0.00 MiB (0.0%) 3: cpu: 0.4% command: [ksoftirqd/0] pid: 11 mem: 0.00 MiB (0.0%) 4: cpu: 0.4% command: [ext4lazyinit] pid: 1524 mem: 0.00 MiB (0.0%) 5: cpu: 0.2% command: init pid: 1 mem: 7.14 MiB (0.3%) Memory top: 5 of 195 1: mem: 25.1 MiB (1.3%) command: xorg pid: 612 cpu: 0.0% 2: mem: 22.4 MiB (1.1%) command: pcmanfm pid: 868 cpu: 0.0% 3: mem: 20.4 MiB (1.0%) command: mutter pid: 833 cpu: 0.0% 4: mem: 17.8 MiB (0.9%) command: lxpanel pid: 862 cpu: 0.0% 5: mem: 14.9 MiB (0.7%) command: smbd pid: 1203 cpu: 2.7% Info: Processes: 195 Uptime: 47m Init: systemd v: 247 runlevel: 5 target: graphical.target tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Shell: storage.sh default: Bash v: 5.1.4 running-in: pty pts/0 (SSH) inxi: 3.3.14

inxi Results

System:
  Host: malinko Kernel: 5.15.30-v7l+ arch: armv7l bits: 32 compiler: N/A
    parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0
    snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000
    vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=62e5118c-02
    rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
  Console: pty pts/0 DM: LightDM v: 1.26.0 Distro: Raspbian GNU/Linux 11 (bullseye)
Machine:
  Type: ARM System: Raspberry Pi 4 Model B Rev 1.5 details: BCM2711 rev: b03115
    Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 1.9 GiB used: 394.1 MiB (20.2%) gpu: 76 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0
    stepping: 3
  Topology: cpus: 1x cores: 4 smt: N/A cache: N/A
  Speed (MHz): avg: 1800 min/max: 600/1800 scaling: driver: cpufreq-dt governor: ondemand
    cores: 1: 1800 2: 1800 3: 1800 4: 1800 bogomips: 1296
  Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3
  vfpv4
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: spec_store_bypass status: Not affected
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 status: Vulnerable
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700
    class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700
    class-ID: hdmi
  Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu
  Display: server: X.org v: 1.20.11 compositor: Mutter v: 3.38.6 driver: X: loaded: modesetting
    unloaded: fbdev gpu: vc4_hdmi,vc4_hdmi,vc4_drm tty: 195x55
  Message: Unable to show GL data. Required tool glxinfo missing.
Audio:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi
  Device-3: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio
    class-ID: bcm2835_audio
  Sound Server-1: ALSA v: k5.15.30-v7l+ running: yes
  Sound Server-2: PulseAudio v: 14.2 running: yes
  Sound Server-3: PipeWire v: 0.3.19 running: yes
Network:
  Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000
    class-ID: mmcnr
  IF: wlan0 state: down mac: XX:XX:XX:XX:XX:XX
  Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
    chip-ID: brcm:fd580000 class-ID: ethernet
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IP v4: 192.168.X.X/24 scope: global broadcast: 192.168.X.X
  IP v6: fe80::f7ad:5821:8a42:396c/64 scope: link
  WAN IP: 46.126.X.X
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address: XX:XX:XX:XX:XX:XX bt-v: 3.0
    lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept
    service-classes: rendering, capturing, audio
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 960.43 GiB used: 6.86 GiB (0.7%)
  ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: Maxtor model: Y032V size: 28.91 GiB block-size:
    physical: 512 B logical: 512 B type: SSD scheme: MBR
  SMART Message: Unknown smartctl error. Unable to generate data.
  ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Samsung model: Portable SSD T3 size: 931.51 GiB
    block-size: physical: 512 B logical: 512 B type: SSD scheme: GPT
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 28.66 GiB size: 28.15 GiB (98.23%) used: 3.66 GiB (13.0%) fs: ext4
    block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs
    uuid: e603363f-79c3-421f-a49e-3c01c0a6dd23
  ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 49.2 MiB (19.5%) fs: vfat
    block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: 6ED3-22D6
  ID-3: /mnt/tmp raw-size: 931.39 GiB size: 915.69 GiB (98.31%) used: 3.15 GiB (0.3%) fs: ext4
    block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: N/A
    uuid: 32b37651-5fec-4840-aac9-e8e9c2133a1f
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 100 MiB used: 24.2 MiB (24.3%) priority: -2 file: /var/swap
Unmounted:
  ID-1: /dev/sda1 maj-min: 8:1 size: 128 MiB fs: N/A label: N/A uuid: N/A
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA
    chip-ID: 2109:3431 class-ID: 0900
  Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003
    class-ID: 0900
  Device-1: 2-1:3 info: Samsung Portable SSD T3 (MU-PT250B MU-PT500B) type: Mass Storage
    driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 896mA chip-ID: 04e8:61f3 class-ID: 0806
    Sensors:
  Missing: Required tool sensors not installed. Check --recommends
Repos:
  Packages: apt: 1398 lib: 742
  Active apt repos in: /etc/apt/sources.list
    1: deb http://raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-free rpi
  Active apt repos in: /etc/apt/sources.list.d/raspi.list
    1: deb http://archive.raspberrypi.org/debian/ bullseye main
Processes:
  CPU top: 5 of 195
  1: cpu: 2.7% command: smbd pid: 1203 mem: 14.9 MiB (0.7%)
  2: cpu: 0.6% command: [kworker/u8:0-events_unbound] pid: 1763 mem: 0.00 MiB (0.0%)
  3: cpu: 0.4% command: [ksoftirqd/0] pid: 11 mem: 0.00 MiB (0.0%)
  4: cpu: 0.4% command: [ext4lazyinit] pid: 1524 mem: 0.00 MiB (0.0%)
  5: cpu: 0.2% command: init pid: 1 mem: 7.14 MiB (0.3%)
  Memory top: 5 of 195
  1: mem: 25.1 MiB (1.3%) command: xorg pid: 612 cpu: 0.0%
  2: mem: 22.4 MiB (1.1%) command: pcmanfm pid: 868 cpu: 0.0%
  3: mem: 20.4 MiB (1.0%) command: mutter pid: 833 cpu: 0.0%
  4: mem: 17.8 MiB (0.9%) command: lxpanel pid: 862 cpu: 0.0%
  5: mem: 14.9 MiB (0.7%) command: smbd pid: 1203 cpu: 2.7%
Info:
  Processes: 195 Uptime: 47m Init: systemd v: 247 runlevel: 5 target: graphical.target
  tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Shell: storage.sh default: Bash v: 5.1.4
  running-in: pty pts/0 (SSH) inxi: 3.3.14

Benchmark #58520 - Brand: Panasonic SD