Benchmark #58635 - pibenchmarks.com

Brand: SanDisk SD Ultra A1 (SC32G)
A1 C10 U1
#3 / 1,539
1,108
#1,214 / 1,539
#200 / 369
1,092
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2022-04-06 12:45:58
#58,635
1,149
+57 (+4.96%)
Anonymous
sdkart

Secure Digital (SD) Card Details
SanDisk SD Ultra A1 (SC32G)
A1 C10 U1
29.5G
SD
SanDisk
SC32G
SDHC
5.00
0x03
SD
8.0
08/2017
Class 10
A1
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 400 1.0
Raspberry Pi 400 Rev 1.0
Raspberry Pi Foundation
ARMv7 v7l
4
1,800
500
4 GB
1,600
50

Operating System

Raspbian GNU/Linux 11 (bullseye)
armv7l

Benchmark Results
16.5 MB/s
37.8 MB/s
33.17 MB/s
834 IOPS
3,052 IOPS
3,336 KB/s
12,208 KB/s
10,533 KB/s
3,425 KB/s
8,814 KB/s
2,880 KB/s

inxi Results
perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LC_MONETARY = "tr_TR.UTF-8", LC_MEASUREMENT = "tr_TR.UTF-8", LC_TIME = "tr_TR.UTF-8", LC_COLLATE = "tr_TR.UTF-8", LC_NUMERIC = "tr_TR.UTF-8", LANG = "en_GB.UTF-8" are supported and installed on your system. perl: warning: Falling back to a fallback locale ("en_GB.UTF-8"). System: Kernel: 5.10.103-v7l+ arch: armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=b481c6b6-02 rootfstype=ext4 fsck.repair=yes rootwait Console: pty pts/0 Distro: Raspbian GNU/Linux 11 (bullseye) Machine: Type: ARM System: Raspberry Pi 400 Rev 1.0 details: BCM2711 rev: c03130 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.82 GiB used: 489.2 MiB (12.5%) gpu: 76 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 3 Topology: cpus: 1x cores: 4 smt: N/A cache: N/A Speed (MHz): avg: 1800 min/max: 600/1800 scaling: driver: cpufreq-dt governor: ondemand cores: 1: 1800 2: 1800 3: 1800 4: 1800 bogomips: 1296 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: No display server data found. Headless machine? tty: 80x40 Message: Unable to show GL data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Sound Server-1: ALSA v: k5.10.103-v7l+ running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: down mac: Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-1: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A IP v4: scope: global IP v6: virtual: stable-privacy scope: link WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: bt-v: 3.0 lmp-v: 5.0 sub-v: 6606 hci-v: 5.0 rev: 36 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 6.4 TiB used: 414.6 GiB (6.3%) ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: SanDisk model: SC32G size: 29.72 GiB block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Seagate model: Backup+ BK size: 931.51 GiB block-size: physical: 4096 B logical: 512 B type: N/A rev: 0410 scheme: GPT SMART Message: A mandatory SMART command failed. Various possible causes. ID-3: /dev/sdb maj-min: 8:16 type: USB vendor: Seagate model: ST6000VN001-2BB186 family: IronWolf size: 5.46 TiB block-size: physical: 4096 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s type: HDD rpm: 5425 rev: SC60 temp: 39 C scheme: GPT SMART: yes state: enabled health: PASSED on: 47 hrs cycles: 4 read: 179.88 GiB written: 497.5 GiB Pre-Fail: attribute: Spin_Retry_Count value: 100 worst: 100 threshold: 97 Message: No optical or floppy data found. Partition: ID-1: / raw-size: 29.47 GiB size: 28.99 GiB (98.38%) used: 7.5 GiB (25.9%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs uuid: 568caafd-bab1-46cb-921b-cd257b61f505 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.3 MiB (19.2%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: C839-E506 ID-3: /mnt/ironwolf/cloud raw-size: 2 TiB size: 1.97 TiB (98.38%) used: 30.49 GiB (1.5%) fs: ext4 block-size: 4096 B dev: /dev/sdb1 maj-min: 8:17 label: N/A uuid: 039dbbf1-d05a-47e5-af7c-a16c3a7cb0af ID-4: /mnt/ironwolf/media raw-size: 2 TiB size: 1.97 TiB (98.38%) used: 166.46 GiB (8.3%) fs: ext4 block-size: 4096 B dev: /dev/sdb2 maj-min: 8:18 label: N/A uuid: 7d3b2adb-c025-42ba-a13a-a4c4b26fe687 ID-5: /mnt/seagate raw-size: 931.51 GiB size: 915.82 GiB (98.31%) used: 210.09 GiB (22.9%) fs: ext4 block-size: 4096 B dev: /dev/sda1 maj-min: 8:1 label: N/A uuid: 0150cd75-1a80-4155-be75-34bf6167bd1d Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 7.5 MiB (7.5%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.4:3 info: Holtek Raspberry Pi Internal Keyboard type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s power: 100mA chip-ID: 04d9:0007 class-ID: 0300 Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-1:2 info: Seagate RSS LLC Backup+ BK type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 144mA chip-ID: 0bc2:a013 class-ID: 0806 Device-2: 2-2:3 info: ASMedia ASM1051E SATA 6Gb/s bridge ASM1053E ASM1153 3Gb/s ASM1153E bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s chip-ID: 174c:55aa class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 1002 lib: 572 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/jellyfin.list 1: deb [arch=armhf] https: //repo.jellyfin.org/raspbian bullseye main No active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ bullseye main Processes: CPU top: 5 of 356 1: cpu: 21.6% command: deluged started by: python3 pid: 848 mem: 57.8 MiB (1.5%) 2: cpu: 1.2% command: [kworker/u8:3-events_unbound] pid: 449 mem: 0.00 MiB (0.0%) 3: cpu: 1.0% command: [ksoftirqd/0] pid: 11 mem: 0.00 MiB (0.0%) 4: cpu: 1.0% command: [kworker/u8:1-events_unbound] pid: 76 mem: 0.00 MiB (0.0%) 5: cpu: 0.7% command: [kswapd0] pid: 68 mem: 0.00 MiB (0.0%) Memory top: 5 of 356 1: mem: 59.7 MiB (1.5%) command: mariadbd pid: 669 cpu: 0.0% 2: mem: 57.8 MiB (1.5%) command: deluged started by: python3 pid: 848 cpu: 21.6% 3: mem: 35.2 MiB (0.9%) command: deluge-web pid: 849 cpu: 0.1% 4: mem: 26.8 MiB (0.6%) command: plex pid: 861 cpu: 0.3% 5: mem: 21.5 MiB (0.5%) command: plex pid: 1324 cpu: 0.3% Info: Processes: 356 Uptime: 22m Init: systemd v: 247 runlevel: 5 tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.14

inxi Results

perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
	LANGUAGE = (unset),
	LC_ALL = (unset),
	LC_MONETARY = "tr_TR.UTF-8",
	LC_MEASUREMENT = "tr_TR.UTF-8",
	LC_TIME = "tr_TR.UTF-8",
	LC_COLLATE = "tr_TR.UTF-8",
	LC_NUMERIC = "tr_TR.UTF-8",
	LANG = "en_GB.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_GB.UTF-8").
System:
  Kernel: 5.10.103-v7l+ arch: armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M
    8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1
    smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000
    console=ttyS0,115200 console=tty1 root=PARTUUID=b481c6b6-02 rootfstype=ext4 fsck.repair=yes
    rootwait
  Console: pty pts/0 Distro: Raspbian GNU/Linux 11 (bullseye)
Machine:
  Type: ARM System: Raspberry Pi 400 Rev 1.0 details: BCM2711 rev: c03130 Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 3.82 GiB used: 489.2 MiB (12.5%) gpu: 76 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0
    stepping: 3
  Topology: cpus: 1x cores: 4 smt: N/A cache: N/A
  Speed (MHz): avg: 1800 min/max: 600/1800 scaling: driver: cpufreq-dt governor: ondemand cores:
    1: 1800 2: 1800 3: 1800 4: 1800 bogomips: 1296
  Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4
  Vulnerabilities: No CPU vulnerability/bugs data available.
Graphics:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700
    class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700
    class-ID: hdmi
  Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu
  Display: server: No display server data found. Headless machine? tty: 80x40
  Message: Unable to show GL data. Required tool glxinfo missing.
Audio:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi
  Device-3: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio
    class-ID: bcm2835_audio
  Sound Server-1: ALSA v: k5.10.103-v7l+ running: yes
Network:
  Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000
    class-ID: mmcnr
  IF: wlan0 state: down mac: 
  Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
    chip-ID: brcm:fd580000 class-ID: ethernet
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 
  IP v4:  type: dynamic noprefixroute scope: global broadcast: 
  IP v6:  scope: link
  IF-ID-1: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A
  IP v4:  scope: global
  IP v6:  virtual: stable-privacy scope: link
  WAN IP: 
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address:  bt-v: 3.0 lmp-v: 5.0
    sub-v: 6606 hci-v: 5.0 rev: 36
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 6.4 TiB used: 414.6 GiB (6.3%)
  ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: SanDisk model: SC32G size: 29.72 GiB block-size:
    physical: 512 B logical: 512 B type: SSD scheme: MBR
  SMART Message: Unknown smartctl error. Unable to generate data.
  ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Seagate model: Backup+ BK size: 931.51 GiB
    block-size: physical: 4096 B logical: 512 B type: N/A rev: 0410 scheme: GPT
  SMART Message: A mandatory SMART command failed. Various possible causes.
  ID-3: /dev/sdb maj-min: 8:16 type: USB vendor: Seagate model: ST6000VN001-2BB186
    family: IronWolf size: 5.46 TiB block-size: physical: 4096 B logical: 512 B sata: 3.1
    speed: 6.0 Gb/s type: HDD rpm: 5425 rev: SC60 temp: 39 C scheme: GPT
  SMART: yes state: enabled health: PASSED on: 47 hrs cycles: 4 read: 179.88 GiB
    written: 497.5 GiB Pre-Fail: attribute: Spin_Retry_Count value: 100 worst: 100 threshold: 97
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 29.47 GiB size: 28.99 GiB (98.38%) used: 7.5 GiB (25.9%) fs: ext4
    block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs
    uuid: 568caafd-bab1-46cb-921b-cd257b61f505
  ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.3 MiB (19.2%) fs: vfat
    block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: C839-E506
  ID-3: /mnt/ironwolf/cloud raw-size: 2 TiB size: 1.97 TiB (98.38%) used: 30.49 GiB (1.5%)
    fs: ext4 block-size: 4096 B dev: /dev/sdb1 maj-min: 8:17 label: N/A
    uuid: 039dbbf1-d05a-47e5-af7c-a16c3a7cb0af
  ID-4: /mnt/ironwolf/media raw-size: 2 TiB size: 1.97 TiB (98.38%) used: 166.46 GiB (8.3%)
    fs: ext4 block-size: 4096 B dev: /dev/sdb2 maj-min: 8:18 label: N/A
    uuid: 7d3b2adb-c025-42ba-a13a-a4c4b26fe687
  ID-5: /mnt/seagate raw-size: 931.51 GiB size: 915.82 GiB (98.31%) used: 210.09 GiB (22.9%)
    fs: ext4 block-size: 4096 B dev: /dev/sda1 maj-min: 8:1 label: N/A
    uuid: 0150cd75-1a80-4155-be75-34bf6167bd1d
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 100 MiB used: 7.5 MiB (7.5%) priority: -2 file: /var/swap
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA
    chip-ID: 2109:3431 class-ID: 0900
  Device-1: 1-1.4:3 info: Holtek Raspberry Pi Internal Keyboard type: Keyboard,HID
    driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s power: 100mA
    chip-ID: 04d9:0007 class-ID: 0300
  Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003
    class-ID: 0900
  Device-1: 2-1:2 info: Seagate RSS LLC Backup+ BK type: Mass Storage driver: uas interfaces: 1
    rev: 3.0 speed: 5 Gb/s power: 144mA chip-ID: 0bc2:a013 class-ID: 0806 Device-2: 2-2:3
    info: ASMedia ASM1051E SATA 6Gb/s bridge ASM1053E ASM1153 3Gb/s ASM1153E bridge
    type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s chip-ID: 174c:55aa
    class-ID: 0806 Sensors:
  Missing: Required tool sensors not installed. Check --recommends
Repos:
  Packages: apt: 1002 lib: 572
  Active apt repos in: /etc/apt/sources.list
    1: deb http: //raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-free rpi
  Active apt repos in: /etc/apt/sources.list.d/jellyfin.list
    1: deb [arch=armhf] https: //repo.jellyfin.org/raspbian bullseye main
  No active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list
  Active apt repos in: /etc/apt/sources.list.d/raspi.list
    1: deb http: //archive.raspberrypi.org/debian/ bullseye main
Processes:
  CPU top: 5 of 356
  1: cpu: 21.6% command: deluged started by: python3 pid: 848 mem: 57.8 MiB (1.5%)
  2: cpu: 1.2% command: [kworker/u8:3-events_unbound] pid: 449 mem: 0.00 MiB (0.0%)
  3: cpu: 1.0% command: [ksoftirqd/0] pid: 11 mem: 0.00 MiB (0.0%)
  4: cpu: 1.0% command: [kworker/u8:1-events_unbound] pid: 76 mem: 0.00 MiB (0.0%)
  5: cpu: 0.7% command: [kswapd0] pid: 68 mem: 0.00 MiB (0.0%)
  Memory top: 5 of 356
  1: mem: 59.7 MiB (1.5%) command: mariadbd pid: 669 cpu: 0.0%
  2: mem: 57.8 MiB (1.5%) command: deluged started by: python3 pid: 848 cpu: 21.6%
  3: mem: 35.2 MiB (0.9%) command: deluge-web pid: 849 cpu: 0.1%
  4: mem: 26.8 MiB (0.6%) command: plex pid: 861 cpu: 0.3%
  5: mem: 21.5 MiB (0.5%) command: plex pid: 1324 cpu: 0.3%
Info:
  Processes: 356 Uptime: 22m Init: systemd v: 247 runlevel: 5 tool: systemctl Compilers:
  gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.14

Benchmark #58635 - Brand: SanDisk SD Ultra A1 (SC32G)