Benchmark #59252 - pibenchmarks.com

Brand: Lexar SD 667X
A1 C10 V30 U3
#243 / 1,679
67
#1,231 / 1,679
#120 / 394
1,381
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2022-04-27 17:29:26
#59,252
1,942
+561 (+28.89%)
Anonymous
Pi 4 on Samsung EVO Select SD

Secure Digital (SD) Card Details
Lexar SD 667X
A1 C10 V30 U3
119G
SD
Lexar
5cMJR
SDXC
5.00
0x9c
SO
0.3
05/2019
Class 10
A1
U3
V30

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.5
Raspberry Pi 4 Model B Rev 1.5
Raspberry Pi Foundation
N/A
4
1,800 (+300)
500
2 GB
50

Operating System

Debian GNU/Linux 11 (bullseye)
aarch64

Benchmark Results
26.9 MB/s
15.15 MB/s
43.69 MB/s
1,533 IOPS
4,354 IOPS
6,133 KB/s
17,418 KB/s
16,781 KB/s
4,871 KB/s
13,017 KB/s
6,115 KB/s

inxi Results
System: Kernel: 5.10.92-v8+ arch: aarch64 bits: 64 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=384d5ff0-02 rootfstype=ext4 fsck.repair=yes rootwait cgroup_memory=1 cgroup_enable=memory Console: N/A Distro: Raspberry Pi OS base: Debian GNU/Linux 11 (bullseye) Machine: Type: ARM System: Raspberry Pi 4 Model B Rev 1.5 details: BCM2835 rev: b03115 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 1.88 GiB used: 1.46 GiB (77.7%) gpu: 76 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 Topology: cpus: 1x cores: 4 smt: N/A cache: N/A Speed (MHz): avg: 1800 min/max: 600/1800 scaling: driver: cpufreq-dt governor: ondemand cores: 1: 1800 2: 1800 3: 1800 4: 1800 bogomips: 432 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: No display server data found. Headless machine? tty: 80x40 Message: Unable to show GL data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Sound Server-1: ALSA v: k5.10.92-v8+ running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: down mac: Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-1: cni0 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: flannel.1 state: unknown speed: 1000 Mbps duplex: full mac: IP v4: scope: global IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-3: veth1fd562ba state: up speed: 10000 Mbps duplex: full mac: IF-ID-4: veth26877abd state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: veth804a18c5 state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: vethc0e7ff0b state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: vethc49fcc0a state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: vethc900e0d9 state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: vethcbca9208 state: up speed: 10000 Mbps duplex: full mac: IF-ID-10: vethd528b17c state: up speed: 10000 Mbps duplex: full mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 4.9 TiB used: 7.25 GiB (0.1%) ID-1: /dev/mmcblk0 maj-min: 179:0 model: 5cMJR size: 119.25 GiB block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/sdb maj-min: 8:16 type: USB model: ATA Lexar 256GB SSD drive model: 256GB SSD size: 238.47 GiB block-size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s type: SSD rev: 610 temp: 38 C SMART: yes state: enabled health: PASSED on: 6d 6h cycles: 3 read: 0 KiB written: 0 KiB ID-3: /dev/sdc maj-min: 8:32 type: USB vendor: Western Digital model: WD My Passport 260F drive model: WD50NDZM-59A8KS1 size: 4.55 TiB block-size: physical: 4096 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s type: HDD rpm: 5400 rev: 2003 drive rev: 01.01A01 temp: 36 C scheme: GPT SMART: yes state: enabled health: PASSED on: 67d 16h cycles: 99 Message: No optical or floppy data found. Partition: ID-1: / raw-size: 118.99 GiB size: 117.12 GiB (98.42%) used: 6.97 GiB (6.0%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs uuid: 1943b829-a99b-45b8-9fe5-7136dbea4c4a ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 31.2 MiB (12.4%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: F914-FF4D ID-3: /mnt/pi-k3s-storage raw-size: N/A size: 4.51 TiB used: 251.6 MiB (0.0%) fs: ext4 dev: /dev/sda1 label: N/A uuid: N/A Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 99.9 MiB (99.9%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/sdc1 maj-min: 8:33 size: 4.55 TiB fs: ext4 label: N/A uuid: b401c56f-542b-47d3-b3c3-d378ba02827a USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-1:4 info: Western Digital My Passport 260F type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.1 speed: 5 Gb/s power: 896mA chip-ID: 1058:260f class-ID: 0806 Device-2: 2-2:3 info: Norelsys NS1068/NS1068X SATA Bridge Controller type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 8mA chip-ID: 2537:1068 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 580 lib: 319 Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian bullseye main contrib non-free 2: deb http: //security.debian.org/debian-security bullseye-security main contrib non-free 3: deb http: //deb.debian.org/debian bullseye-updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ bullseye main Processes: CPU top: 5 of 215 1: cpu: 19.2% command: k3s pid: 739 mem: 501.8 MiB (27.1%) 2: cpu: 10.5% command: containerd pid: 777 mem: 59.7 MiB (3.2%) 3: cpu: 7.0% command: python pid: 160974 mem: 93.2 MiB (5.0%) 4: cpu: 1.9% command: xvfb pid: 161360 mem: 22.2 MiB (1.2%) 5: cpu: 1.7% command: java pid: 161416 mem: 327.1 MiB (17.6%) Memory top: 5 of 215 1: mem: 501.8 MiB (27.1%) command: k3s pid: 739 cpu: 19.2% 2: mem: 327.1 MiB (17.6%) command: java pid: 161416 cpu: 1.7% 3: mem: 93.2 MiB (5.0%) command: python pid: 160974 cpu: 7.0% 4: mem: 82.2 MiB (4.4%) command: agent pid: 710599 cpu: 0.9% 5: mem: 59.7 MiB (3.2%) command: containerd pid: 777 cpu: 10.5% Info: Processes: 215 Uptime: 5d 23h 16m Init: systemd v: 247 runlevel: 5 tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.15

inxi Results

System:
  Kernel: 5.10.92-v8+ arch: aarch64 bits: 64 compiler: N/A parameters: coherent_pool=1M
    8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1
    smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000
    console=ttyS0,115200 console=tty1 root=PARTUUID=384d5ff0-02 rootfstype=ext4 fsck.repair=yes
    rootwait cgroup_memory=1 cgroup_enable=memory
  Console: N/A Distro: Raspberry Pi OS base: Debian GNU/Linux 11 (bullseye)
Machine:
  Type: ARM System: Raspberry Pi 4 Model B Rev 1.5 details: BCM2835 rev: b03115 Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 1.88 GiB used: 1.46 GiB (77.7%) gpu: 76 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0
    stepping: 3
  Topology: cpus: 1x cores: 4 smt: N/A cache: N/A
  Speed (MHz): avg: 1800 min/max: 600/1800 scaling: driver: cpufreq-dt governor: ondemand cores:
    1: 1800 2: 1800 3: 1800 4: 1800 bogomips: 432
  Features: asimd cpuid crc32 evtstrm fp
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 status: Vulnerable
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700
    class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700
    class-ID: hdmi
  Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu
  Display: server: No display server data found. Headless machine? tty: 80x40
  Message: Unable to show GL data. Required tool glxinfo missing.
Audio:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi
  Device-3: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio
    class-ID: bcm2835_audio
  Sound Server-1: ALSA v: k5.10.92-v8+ running: yes
Network:
  Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000
    class-ID: mmcnr
  IF: wlan0 state: down mac: 
  Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
    chip-ID: brcm:fd580000 class-ID: ethernet
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 
  IP v4:  type: dynamic noprefixroute scope: global broadcast: 
  IP v6:  scope: link
  IF-ID-1: cni0 state: up speed: 10000 Mbps duplex: unknown mac: 
  IP v4:  scope: global broadcast: 
  IP v6:  scope: link
  IF-ID-2: flannel.1 state: unknown speed: 1000 Mbps duplex: full mac: 
  IP v4:  scope: global
  IP v4:  type: noprefixroute scope: global broadcast: 
  IP v6:  scope: link
  IF-ID-3: veth1fd562ba state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-4: veth26877abd state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-5: veth804a18c5 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-6: vethc0e7ff0b state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-7: vethc49fcc0a state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-8: vethc900e0d9 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-9: vethcbca9208 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-10: vethd528b17c state: up speed: 10000 Mbps duplex: full mac: 
  WAN IP: 
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address:  bt-v: 3.0 lmp-v: 5.0
    sub-v: 6119 hci-v: 5.0 rev: 156
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 4.9 TiB used: 7.25 GiB (0.1%)
  ID-1: /dev/mmcblk0 maj-min: 179:0 model: 5cMJR size: 119.25 GiB block-size: physical: 512 B
    logical: 512 B type: SSD scheme: MBR
  SMART Message: Unknown smartctl error. Unable to generate data.
  ID-2: /dev/sdb maj-min: 8:16 type: USB model: ATA Lexar 256GB SSD drive model: 256GB SSD
    size: 238.47 GiB block-size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s type: SSD
    rev: 610 temp: 38 C
  SMART: yes state: enabled health: PASSED on: 6d 6h cycles: 3 read: 0 KiB written: 0 KiB
  ID-3: /dev/sdc maj-min: 8:32 type: USB vendor: Western Digital model: WD My Passport 260F
    drive model: WD50NDZM-59A8KS1 size: 4.55 TiB block-size: physical: 4096 B logical: 512 B
    sata: 3.1 speed: 6.0 Gb/s type: HDD rpm: 5400 rev: 2003 drive rev: 01.01A01 temp: 36 C scheme: GPT
  SMART: yes state: enabled health: PASSED on: 67d 16h cycles: 99
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 118.99 GiB size: 117.12 GiB (98.42%) used: 6.97 GiB (6.0%) fs: ext4
    block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs
    uuid: 1943b829-a99b-45b8-9fe5-7136dbea4c4a
  ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 31.2 MiB (12.4%) fs: vfat
    block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: F914-FF4D
  ID-3: /mnt/pi-k3s-storage raw-size: N/A size: 4.51 TiB used: 251.6 MiB (0.0%) fs: ext4
    dev: /dev/sda1 label: N/A uuid: N/A
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 100 MiB used: 99.9 MiB (99.9%) priority: -2 file: /var/swap
Unmounted:
  ID-1: /dev/sdc1 maj-min: 8:33 size: 4.55 TiB fs: ext4 label: N/A
    uuid: b401c56f-542b-47d3-b3c3-d378ba02827a
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA
    chip-ID: 2109:3431 class-ID: 0900
  Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003
    class-ID: 0900
  Device-1: 2-1:4 info: Western Digital My Passport 260F type: Mass Storage driver: usb-storage
    interfaces: 1 rev: 3.1 speed: 5 Gb/s power: 896mA chip-ID: 1058:260f class-ID: 0806
    Device-2: 2-2:3 info: Norelsys NS1068/NS1068X SATA Bridge Controller type: Mass Storage
    driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 8mA chip-ID: 2537:1068
    class-ID: 0806 Sensors:
  Missing: Required tool sensors not installed. Check --recommends
Repos:
  Packages: apt: 580 lib: 319
  Active apt repos in: /etc/apt/sources.list
    1: deb http: //deb.debian.org/debian bullseye main contrib non-free
    2: deb http: //security.debian.org/debian-security bullseye-security main contrib non-free
    3: deb http: //deb.debian.org/debian bullseye-updates main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/raspi.list
    1: deb http: //archive.raspberrypi.org/debian/ bullseye main
Processes:
  CPU top: 5 of 215
  1: cpu: 19.2% command: k3s pid: 739 mem: 501.8 MiB (27.1%)
  2: cpu: 10.5% command: containerd pid: 777 mem: 59.7 MiB (3.2%)
  3: cpu: 7.0% command: python pid: 160974 mem: 93.2 MiB (5.0%)
  4: cpu: 1.9% command: xvfb pid: 161360 mem: 22.2 MiB (1.2%)
  5: cpu: 1.7% command: java pid: 161416 mem: 327.1 MiB (17.6%)
  Memory top: 5 of 215
  1: mem: 501.8 MiB (27.1%) command: k3s pid: 739 cpu: 19.2%
  2: mem: 327.1 MiB (17.6%) command: java pid: 161416 cpu: 1.7%
  3: mem: 93.2 MiB (5.0%) command: python pid: 160974 cpu: 7.0%
  4: mem: 82.2 MiB (4.4%) command: agent pid: 710599 cpu: 0.9%
  5: mem: 59.7 MiB (3.2%) command: containerd pid: 777 cpu: 10.5%
Info:
  Processes: 215 Uptime: 5d 23h 16m Init: systemd v: 247 runlevel: 5 tool: systemctl Compilers:
  gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.15

Benchmark #59252 - Brand: Lexar SD 667X