Benchmark #5940 - pibenchmarks.com

Brand: Seagate Momentus
HDD (2.5" SATA)
#69 / 1,539
155
#1,030 / 1,539
#41 / 66
#8 / 20
1,500
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se

Overview
2019-12-30 04:18:05
#5,940
1,279
-221 (-17.28%)
CPK
Intenso USB3.0 2,5 1TB on Pi4 using USB3.0 Cable

Storage Details
Seagate Momentus
HDD (2.5" SATA)
1000G
HDD
Seagate
ST1000LM024HN-M101MBB
2.5 inch
SATA
5,400
3.00
5,000
152d:0539
0x152d (JMicron Technology Corp. / JMicron USA Technology Corp.)
0x0539 (JMS539/567 SuperSpeed SATA II/III 3.0G/6.0G Bridge)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Ubuntu 18.04.3 LTS
aarch64

Benchmark Results
75.1 MB/s
109.26 MB/s
201.28 MB/s
465 IOPS
139 IOPS
1,862 KB/s
559 KB/s
12,763 KB/s
13,671 KB/s
511 KB/s
1,744 KB/s

inxi Results
System: Host: ubuntu Kernel: 4.19.89-v8-26 aarch64 bits: 64 compiler: gcc v: 9.2.0 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:640x480M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_compat_alsa=0 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 fsck.repair=yes fsck.mode=auto root=/dev/sda2 rootfstype=ext4 elevator=deadline rootwait Console: tty 0 dm: GDM3 3.28.3 Distro: Ubuntu 18.04.3 LTS (Bionic Beaver) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.79 GiB used: 610.9 MiB (15.7%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.19.6 driver: N/A compositor: gnome-shell tty: 80x25 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.89-v8-26 Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 946.35 GiB used: 4.23 GiB (0.4%) ID-1: /dev/mmcblk0 vendor: SanDisk model: SL16G size: 14.84 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: Intenso model: External USB 3.0 size: 931.51 GiB block size: physical: 512 B logical: 512 B rev: 0206 scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 931.26 GiB size: 916.75 GiB (98.44%) used: 4.19 GiB (0.5%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: writable uuid: bfa0733b-bdb9-4846-914a-45160bac3ed0 ID-2: /boot/firmware raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 41.4 MiB (16.4%) fs: vfat block size: 512 B dev: /dev/sda1 label: system-boot uuid: E497-1FDF Unmounted: ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: system-boot uuid: E497-1FDF ID-2: /dev/mmcblk0p2 size: 5.25 GiB fs: ext4 label: writable uuid: bfa0733b-bdb9-4846-914a-45160bac3ed0 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: JMicron / JMicron USA JMS539/567 SuperSpeed SATA II/III 3.0G/6.0G Bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0539 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //ports.ubuntu.com/ubuntu-ports bionic main restricted 2: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates main restricted 3: deb http: //ports.ubuntu.com/ubuntu-ports bionic universe 4: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates universe 5: deb http: //ports.ubuntu.com/ubuntu-ports bionic multiverse 6: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates multiverse 7: deb http: //ports.ubuntu.com/ubuntu-ports bionic-backports main restricted universe multiverse 8: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security main restricted 9: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security universe 10: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security multiverse Active apt repos in: /etc/apt/sources.list.d/oibaf-ubuntu-graphics-drivers-bionic.list 1: deb http: //ppa.launchpad.net/oibaf/graphics-drivers/ubuntu bionic main Processes: CPU top: 5 1: cpu: 10.7% command: gnome-shell pid: 995 mem: 122.5 MiB (3.2%) 2: cpu: 0.7% command: init pid: 1 mem: 8.23 MiB (0.2%) 3: cpu: 0.4% command: [usb-storage] pid: 110 mem: 0.00 MiB (0.0%) 4: cpu: 0.2% command: started by: lxcfs pid: 637 mem: 1.88 MiB (0.0%) 5: cpu: 0.2% command: dbus-daemon pid: 639 mem: 4.66 MiB (0.1%) Memory top: 5 1: mem: 122.5 MiB (3.2%) command: gnome-shell pid: 995 cpu: 10.7% 2: mem: 50.5 MiB (1.3%) command: xwayland pid: 1037 cpu: 0.0% 3: mem: 48.5 MiB (1.2%) command: gsd-media-keys pid: 1139 cpu: 0.1% 4: mem: 48.0 MiB (1.2%) command: gsd-power pid: 1143 cpu: 0.1% 5: mem: 47.5 MiB (1.2%) command: gsd-xsettings pid: 1119 cpu: 0.1% Info: Processes: 187 Uptime: 10m Init: systemd v: 237 runlevel: 5 Compilers: gcc: 7.4.0 alt: 7 Client: shell wrapper v: 4.4.20-release inxi: 3.0.37

inxi Results

System:    Host: ubuntu Kernel: 4.19.89-v8-26 aarch64 bits: 64 compiler: gcc v: 9.2.0 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:640x480M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 
           snd_bcm2835.enable_compat_alsa=0 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 
           fsck.repair=yes fsck.mode=auto root=/dev/sda2 rootfstype=ext4 elevator=deadline 
           rootwait 
           Console: tty 0 dm: GDM3 3.28.3 Distro: Ubuntu 18.04.3 LTS (Bionic Beaver) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.79 GiB used: 610.9 MiB (15.7%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 
           family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: __user pointer sanitization 
           Type: spectre_v2 status: Vulnerable 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.19.6 driver: N/A compositor: gnome-shell tty: 80x25 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.89-v8-26 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 946.35 GiB used: 4.23 GiB (0.4%) 
           ID-1: /dev/mmcblk0 vendor: SanDisk model: SL16G size: 14.84 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: Intenso model: External USB 3.0 size: 931.51 GiB 
           block size: physical: 512 B logical: 512 B rev: 0206 scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 931.26 GiB size: 916.75 GiB (98.44%) used: 4.19 GiB (0.5%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: writable 
           uuid: bfa0733b-bdb9-4846-914a-45160bac3ed0 
           ID-2: /boot/firmware raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
           used: 41.4 MiB (16.4%) fs: vfat block size: 512 B dev: /dev/sda1 label: system-boot 
           uuid: E497-1FDF 
Unmounted: ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: system-boot uuid: E497-1FDF 
           ID-2: /dev/mmcblk0p2 size: 5.25 GiB fs: ext4 label: writable 
           uuid: bfa0733b-bdb9-4846-914a-45160bac3ed0 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 
           info: JMicron / JMicron USA JMS539/567 SuperSpeed SATA II/III 3.0G/6.0G Bridge 
           type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s 
           chip ID: 152d:0539 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //ports.ubuntu.com/ubuntu-ports bionic main restricted
           2: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates main restricted
           3: deb http: //ports.ubuntu.com/ubuntu-ports bionic universe
           4: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates universe
           5: deb http: //ports.ubuntu.com/ubuntu-ports bionic multiverse
           6: deb http: //ports.ubuntu.com/ubuntu-ports bionic-updates multiverse
           7: deb http: //ports.ubuntu.com/ubuntu-ports bionic-backports main restricted universe multiverse
           8: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security main restricted
           9: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security universe
           10: deb http: //ports.ubuntu.com/ubuntu-ports bionic-security multiverse
           Active apt repos in: /etc/apt/sources.list.d/oibaf-ubuntu-graphics-drivers-bionic.list 
           1: deb http: //ppa.launchpad.net/oibaf/graphics-drivers/ubuntu bionic main
Processes: CPU top: 5 
           1: cpu: 10.7% command: gnome-shell pid: 995 mem: 122.5 MiB (3.2%) 
           2: cpu: 0.7% command: init pid: 1 mem: 8.23 MiB (0.2%) 
           3: cpu: 0.4% command: [usb-storage] pid: 110 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.2% command: started by: lxcfs pid: 637 mem: 1.88 MiB (0.0%) 
           5: cpu: 0.2% command: dbus-daemon pid: 639 mem: 4.66 MiB (0.1%) 
           Memory top: 5 
           1: mem: 122.5 MiB (3.2%) command: gnome-shell pid: 995 cpu: 10.7% 
           2: mem: 50.5 MiB (1.3%) command: xwayland pid: 1037 cpu: 0.0% 
           3: mem: 48.5 MiB (1.2%) command: gsd-media-keys pid: 1139 cpu: 0.1% 
           4: mem: 48.0 MiB (1.2%) command: gsd-power pid: 1143 cpu: 0.1% 
           5: mem: 47.5 MiB (1.2%) command: gsd-xsettings pid: 1119 cpu: 0.1% 
Info:      Processes: 187 Uptime: 10m Init: systemd v: 237 runlevel: 5 Compilers: gcc: 7.4.0 
           alt: 7 Client: shell wrapper v: 4.4.20-release inxi: 3.0.37

Benchmark #5940 - Brand: Seagate Momentus