Benchmark #59616 - pibenchmarks.com

Brand: Crucial MX500 Series
SSD (2.5" SATA)
#19 / 1,539
490
#387 / 1,539
#371 / 875
#73 / 363
6,859
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2022-05-11 12:18:30
#59,616
7,267
+408 (+5.61%)
Anonymous
Pi-KVM with Crucial MX500

Storage Details
Crucial MX500 Series
SSD (2.5" SATA)
500G
SSD
Crucial
CT500MX500SSD1
2.5 inch
SATA
3.10
5,000
174c:55aa
0x174c (ASMedia Technology Inc.)
0x55aa (ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
ARMv7 v7l
4
1,500
500
8 GB
1,600

Operating System

Arch Linux ARM
armv7l

Benchmark Results
71.3 MB/s
298.32 MB/s
266.67 MB/s
9,106 IOPS
22,188 IOPS
36,425 KB/s
88,754 KB/s
24,737 KB/s
24,830 KB/s
24,503 KB/s
32,668 KB/s

inxi Results
System: Kernel: 5.15.34-1-rpi-ARCH arch: armv7l bits: 32 compiler: gcc v: 11.2.0 parameters: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=640 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 root=/dev/sda2 rw cma=128M rootwait console=ttyAMA0,115200 console=tty1 selinux=0 plymouth.enable=0 smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0 kgdboc=ttyAMA0,115200 audit=0 Console: N/A Distro: Arch Linux ARM Machine: Type: ARM System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2711 rev: d03114 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 7.78 GiB used: 396.5 MiB (5.0%) gpu: 128 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 3 Topology: cpus: 1x cores: 4 smt: N/A cache: N/A Speed (MHz): avg: 1400 min/max: 600/1500 scaling: driver: cpufreq-dt governor: schedutil cores: 1: 1400 2: 1400 3: 1400 4: 1400 bogomips: 792 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Not affected Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc class-ID: fb Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: No display server data found. Headless machine? tty: 80x40 Message: Unable to show GL data. Required tool glxinfo missing. Audio: Device-1: simple-audio-card driver: asoc_simple_card bus-ID: N/A chip-ID: simple-audio-card:soc class-ID: sound Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.15.34-1-rpi-ARCH running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: down mac: Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic scope: global IP v6: scope: link WAN IP: Bluetooth: Message: No bluetooth data found. Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 465.76 GiB used: 16.02 GiB (3.4%) SMART Message: Required tool smartctl not installed. Check --recommends ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Crucial model: CT500MX500SSD1 size: 465.76 GiB block-size: physical: 4096 B logical: 512 B type: SSD scheme: MBR Message: No optical or floppy data found. Partition: ID-1: / raw-size: 465.51 GiB size: 465.34 GiB (99.96%) used: 15.98 GiB (3.4%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: N/A uuid: 6d7bc881-f3fe-472d-9e1b-37437a944561 ID-2: /boot raw-size: 256 MiB size: 255.7 MiB (99.89%) used: 42 MiB (16.4%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: N/A uuid: 7FAB-ABFA Swap: Alert: No swap data was found. Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 1-1.2:3 info: VIA Labs USB2.0 Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip-ID: 2109:2817 class-ID: 0900 Device-1: 1-1.2.1:4 info: Prolific PL2303 Serial Port / Mobile Action MA-8910P type: driver: pl2303 interfaces: 1 rev: 1.1 speed: 12 Mb/s power: 100mA chip-ID: 067b:2303 class-ID: 0000 Device-2: 1-1.2.2:5 info: Prolific PL2303 Serial Port / Mobile Action MA-8910P type: driver: pl2303 interfaces: 1 rev: 1.1 speed: 12 Mb/s power: 100mA chip-ID: 067b:2303 class-ID: 0000 Device-3: 1-1.2.3:6 info: Prolific PL2303 Serial Port / Mobile Action MA-8910P type: driver: pl2303 interfaces: 1 rev: 1.1 speed: 12 Mb/s power: 100mA chip-ID: 067b:2303 class-ID: 0000 Hub-4: 1-1.2.4:7 info: VIA Labs USB2.0 Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip-ID: 2109:2817 class-ID: 0900 Device-1: 1-1.2.X.X:8 info: QinHeng CH340 serial converter type: driver: ch341,ch341-uart interfaces: 1 rev: 1.1 speed: 12 Mb/s power: 98mA chip-ID: 1a86:7523 class-ID: ff00 Hub-5: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-1:2 info: ASMedia ASM1051E SATA 6Gb/s bridge ASM1053E ASM1153 3Gb/s ASM1153E bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s chip-ID: 174c:55aa class-ID: 0806 Hub-6: 2-2:3 info: VIA Labs USB3.0 Hub ports: 4 rev: 3.1 speed: 5 Gb/s chip-ID: 2109:0817 class-ID: 0900 Hub-7: 2-2.4:4 info: VIA Labs USB3.0 Hub ports: 4 rev: 3.1 speed: 5 Gb/s chip-ID: 2109:0817 class-ID: 0900 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: pacman: 362 lib: 68 Active pacman repo servers in: /etc/pacman.conf 1: https: //files.pikvm.org/repos/arch/rpi4-arm Active pacman repo servers in: /etc/pacman.d/mirrorlist 1: http: //de3.mirror.archlinuxarm.org/$arch/$repo Processes: CPU top: 5 of 155 1: cpu: 12.1% command: ustreamer started by: kvmd/streamer: pid: 28020 mem: 5.00 MiB (0.0%) 2: cpu: 4.8% command: python started by: kvmd/main: pid: 402 mem: 32.4 MiB (0.4%) 3: cpu: 1.6% command: janus pid: 415 mem: 17.3 MiB (0.2%) 4: cpu: 0.9% command: python started by: kvmd/hid-keyboard: pid: 450 mem: 20.8 MiB (0.2%) 5: cpu: 0.8% command: bash pid: 20029 mem: 3.10 MiB (0.0%) Memory top: 5 of 155 1: mem: 32.4 MiB (0.4%) command: python started by: kvmd/main: pid: 402 cpu: 4.8% 2: mem: 20.9 MiB (0.2%) command: python started by: kvmd/hid-mouse: pid: 451 cpu: 0.6% 3: mem: 20.8 MiB (0.2%) command: python started by: kvmd/hid-keyboard: pid: 450 cpu: 0.9% 4: mem: 20.8 MiB (0.2%) command: python started by: kvmd/gpio-ezcoo-ez: pid: 449 cpu: 0.4% 5: mem: 17.6 MiB (0.2%) command: kvmd-janus started by: python pid: 403 cpu: 0.0% Info: Processes: 155 Uptime: 10d 14h 33m Init: systemd v: 250 tool: systemctl Compilers: gcc: 11.2.0 Client: shell wrapper v: 5.1.16-release inxi: 3.3.15

inxi Results

System:
  Kernel: 5.15.34-1-rpi-ARCH arch: armv7l bits: 32 compiler: gcc v: 11.2.0
    parameters: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0
    snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=640 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1
    smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000
    root=/dev/sda2 rw cma=128M rootwait console=ttyAMA0,115200 console=tty1 selinux=0
    plymouth.enable=0 smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0 kgdboc=ttyAMA0,115200 audit=0
  Console: N/A Distro: Arch Linux ARM
Machine:
  Type: ARM System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2711 rev: d03114 Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 7.78 GiB used: 396.5 MiB (5.0%) gpu: 128 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0
    stepping: 3
  Topology: cpus: 1x cores: 4 smt: N/A cache: N/A
  Speed (MHz): avg: 1400 min/max: 600/1500 scaling: driver: cpufreq-dt governor: schedutil
    cores: 1: 1400 2: 1400 3: 1400 4: 1400 bogomips: 792
  Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: spec_store_bypass status: Not affected
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 status: Vulnerable
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc class-ID: fb
  Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
  Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
  Display: server: No display server data found. Headless machine? tty: 80x40
  Message: Unable to show GL data. Required tool glxinfo missing.
Audio:
  Device-1: simple-audio-card driver: asoc_simple_card bus-ID: N/A chip-ID: simple-audio-card:soc
    class-ID: sound
  Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
  Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
  Sound Server-1: ALSA v: k5.15.34-1-rpi-ARCH running: yes
Network:
  Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000
    class-ID: mmcnr
  IF: wlan0 state: down mac: 
  Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
    chip-ID: brcm:fd580000 class-ID: ethernet
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 
  IP v4:  type: dynamic scope: global
  IP v6:  scope: link
  WAN IP: 
Bluetooth:
  Message: No bluetooth data found.
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 465.76 GiB used: 16.02 GiB (3.4%)
  SMART Message: Required tool smartctl not installed. Check --recommends
  ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Crucial model: CT500MX500SSD1 size: 465.76 GiB
    block-size: physical: 4096 B logical: 512 B type: SSD scheme: MBR
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 465.51 GiB size: 465.34 GiB (99.96%) used: 15.98 GiB (3.4%) fs: ext4
    block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: N/A
    uuid: 6d7bc881-f3fe-472d-9e1b-37437a944561
  ID-2: /boot raw-size: 256 MiB size: 255.7 MiB (99.89%) used: 42 MiB (16.4%) fs: vfat
    block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: N/A uuid: 7FAB-ABFA
Swap:
  Alert: No swap data was found.
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA
    chip-ID: 2109:3431 class-ID: 0900
  Hub-3: 1-1.2:3 info: VIA Labs USB2.0 Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip-ID: 2109:2817
    class-ID: 0900
  Device-1: 1-1.2.1:4 info: Prolific PL2303 Serial Port / Mobile Action MA-8910P
    type:  driver: pl2303 interfaces: 1 rev: 1.1 speed: 12 Mb/s power: 100mA
    chip-ID: 067b:2303 class-ID: 0000
  Device-2: 1-1.2.2:5 info: Prolific PL2303 Serial Port / Mobile Action MA-8910P
    type:  driver: pl2303 interfaces: 1 rev: 1.1 speed: 12 Mb/s power: 100mA
    chip-ID: 067b:2303 class-ID: 0000
  Device-3: 1-1.2.3:6 info: Prolific PL2303 Serial Port / Mobile Action MA-8910P
    type:  driver: pl2303 interfaces: 1 rev: 1.1 speed: 12 Mb/s power: 100mA
    chip-ID: 067b:2303 class-ID: 0000
  Hub-4: 1-1.2.4:7 info: VIA Labs USB2.0 Hub ports: 4 rev: 2.1 speed: 480 Mb/s
    chip-ID: 2109:2817 class-ID: 0900
  Device-1: 1-1.2.X.X:8 info: QinHeng CH340 serial converter type: 
    driver: ch341,ch341-uart interfaces: 1 rev: 1.1 speed: 12 Mb/s power: 98mA chip-ID: 1a86:7523
    class-ID: ff00
  Hub-5: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003
    class-ID: 0900
  Device-1: 2-1:2
    info: ASMedia ASM1051E SATA 6Gb/s bridge ASM1053E ASM1153 3Gb/s ASM1153E bridge
    type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s chip-ID: 174c:55aa
    class-ID: 0806 Hub-6: 2-2:3 info: VIA Labs USB3.0 Hub ports: 4 rev: 3.1 speed: 5 Gb/s chip-ID: 2109:0817
    class-ID: 0900
  Hub-7: 2-2.4:4 info: VIA Labs USB3.0 Hub ports: 4 rev: 3.1 speed: 5 Gb/s chip-ID: 2109:0817
    class-ID: 0900
Sensors:
  Missing: Required tool sensors not installed. Check --recommends
Repos:
  Packages: pacman: 362 lib: 68
  Active pacman repo servers in: /etc/pacman.conf
    1: https: //files.pikvm.org/repos/arch/rpi4-arm
  Active pacman repo servers in: /etc/pacman.d/mirrorlist
    1: http: //de3.mirror.archlinuxarm.org/$arch/$repo
Processes:
  CPU top: 5 of 155
  1: cpu: 12.1% command: ustreamer started by: kvmd/streamer: pid: 28020 mem: 5.00 MiB (0.0%)
  2: cpu: 4.8% command: python started by: kvmd/main: pid: 402 mem: 32.4 MiB (0.4%)
  3: cpu: 1.6% command: janus pid: 415 mem: 17.3 MiB (0.2%)
  4: cpu: 0.9% command: python started by: kvmd/hid-keyboard: pid: 450 mem: 20.8 MiB (0.2%)
  5: cpu: 0.8% command: bash pid: 20029 mem: 3.10 MiB (0.0%)
  Memory top: 5 of 155
  1: mem: 32.4 MiB (0.4%) command: python started by: kvmd/main: pid: 402 cpu: 4.8%
  2: mem: 20.9 MiB (0.2%) command: python started by: kvmd/hid-mouse: pid: 451 cpu: 0.6%
  3: mem: 20.8 MiB (0.2%) command: python started by: kvmd/hid-keyboard: pid: 450 cpu: 0.9%
  4: mem: 20.8 MiB (0.2%) command: python started by: kvmd/gpio-ezcoo-ez: pid: 449 cpu: 0.4%
  5: mem: 17.6 MiB (0.2%) command: kvmd-janus started by: python pid: 403 cpu: 0.0%
Info:
  Processes: 155 Uptime: 10d 14h 33m Init: systemd v: 250 tool: systemctl Compilers: gcc: 11.2.0
  Client: shell wrapper v: 5.1.16-release inxi: 3.3.15

Benchmark #59616 - Brand: Crucial MX500 Series