Benchmark #60297 - pibenchmarks.com

Brand: Western Digital Blue M.2
SSD (M.2 SATA)
#27 / 1,539
341
#327 / 1,539
#313 / 875
#33 / 112
7,244
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2022-06-10 15:31:41
#60,297
6,559
-685 (-10.44%)
the3ngineer
WD Blue 500GB SATA III M2 2280 on Argon One M2 USB3 and Pi4 8GB

Storage Details
Western Digital Blue M.2
SSD (M.2 SATA)
500G
SSD
WDC
WDS500G2B0B-00YS70
M.2
SATA
3.10
5,000
174c:1156
0x174c (ASMedia Technology Inc.)
0x1156
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.5
Raspberry Pi 4 Model B Rev 1.5
Raspberry Pi Foundation
N/A
4
1,800 (+300)
500
8 GB

Operating System

Debian GNU/Linux 11 (bullseye)
aarch64

Benchmark Results
114 MB/s
340.86 MB/s
270.47 MB/s
11,804 IOPS
21,178 IOPS
47,216 KB/s
84,715 KB/s
34,889 KB/s
29,519 KB/s
15,359 KB/s
21,061 KB/s

inxi Results
System: Kernel: 5.15.32-v8+ arch: aarch64 bits: 64 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=tty1 root=PARTUUID=c6235507-02 rootfstype=ext4 fsck.repair=yes rootwait systemd.unified_cgroup_hierarchy=false apparmor=1 security=apparmor cgroup_enable=memory cgroup_memory=1 Console: pty pts/0 Distro: Raspberry Pi OS base: Debian GNU/Linux 11 (bullseye) Machine: Type: ARM System: Raspberry Pi 4 Model B Rev 1.5 details: BCM2835 rev: d03115 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 7.69 GiB used: 1.5 GiB (19.5%) gpu: 16 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 Topology: cpus: 1x cores: 4 smt: N/A cache: N/A Speed (MHz): avg: 1800 min/max: 600/1800 scaling: driver: cpufreq-dt governor: ondemand cores: 1: 1800 2: 1800 3: 1800 4: 1800 bogomips: 432 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: No display server data found. Headless machine? tty: 80x40 Message: Unable to show GL data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Sound Server-1: ALSA v: k5.15.32-v8+ running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: up mac: IP v6: scope: link Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v4: type: secondary noprefixroute scope: global broadcast: IP v6: type: noprefixroute scope: link IF-ID-1: br-06b44a2ec1b0 state: down mac: IP v4: scope: global broadcast: IF-ID-2: br-b3557da8e17b state: up speed: 10000 Mbps duplex: unknown mac: Message: Output throttled. IPs: 2! Limit: 10! Override: --limit [1-x!-1 all] IF-ID-3: docker0 state: up speed: 10000 Mbps duplex: unknown mac: Message: Output throttled. IPs: 2! Limit: 10! Override: --limit [1-x!-1 all] IF-ID-4: hassio state: down mac: Message: Output throttled. IPs: 1! Limit: 10! Override: --limit [1-x!-1 all] IF-ID-5: veth1580cb0 state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: veth1e6fb83 state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: veth4ddf387 state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: veth648fe1c state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: veth6f5ba15 state: up speed: 10000 Mbps duplex: full mac: IF-ID-10: vethb9f0849 state: up speed: 10000 Mbps duplex: full mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Can't use an undefined value as an ARRAY reference at ./inxi line 12301.

inxi Results

System:
  Kernel: 5.15.32-v8+ arch: aarch64 bits: 64 compiler: N/A parameters: coherent_pool=1M
    8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1
    smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000
    console=tty1 root=PARTUUID=c6235507-02 rootfstype=ext4 fsck.repair=yes rootwait
    systemd.unified_cgroup_hierarchy=false apparmor=1 security=apparmor cgroup_enable=memory
    cgroup_memory=1
  Console: pty pts/0 Distro: Raspberry Pi OS base: Debian GNU/Linux 11 (bullseye)
Machine:
  Type: ARM System: Raspberry Pi 4 Model B Rev 1.5 details: BCM2835 rev: d03115 Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 7.69 GiB used: 1.5 GiB (19.5%) gpu: 16 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0
    stepping: 3
  Topology: cpus: 1x cores: 4 smt: N/A cache: N/A
  Speed (MHz): avg: 1800 min/max: 600/1800 scaling: driver: cpufreq-dt governor: ondemand cores:
    1: 1800 2: 1800 3: 1800 4: 1800 bogomips: 432
  Features: asimd cpuid crc32 evtstrm fp
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 status: Vulnerable
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700
    class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700
    class-ID: hdmi
  Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu
  Display: server: No display server data found. Headless machine? tty: 80x40
  Message: Unable to show GL data. Required tool glxinfo missing.
Audio:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi
  Device-3: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio
    class-ID: bcm2835_audio
  Sound Server-1: ALSA v: k5.15.32-v8+ running: yes
Network:
  Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000
    class-ID: mmcnr
  IF: wlan0 state: up mac: 
  IP v6:  scope: link
  Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
    chip-ID: brcm:fd580000 class-ID: ethernet
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 
  IP v4:  type: dynamic noprefixroute scope: global broadcast: 
  IP v4:  type: secondary noprefixroute scope: global broadcast: 
  IP v6:  type: noprefixroute scope: link
  IF-ID-1: br-06b44a2ec1b0 state: down mac: 
  IP v4:  scope: global broadcast: 
  IF-ID-2: br-b3557da8e17b state: up speed: 10000 Mbps duplex: unknown mac: 
  Message: Output throttled. IPs: 2! Limit: 10! Override: --limit [1-x!-1 all]
  IF-ID-3: docker0 state: up speed: 10000 Mbps duplex: unknown mac: 
  Message: Output throttled. IPs: 2! Limit: 10! Override: --limit [1-x!-1 all]
  IF-ID-4: hassio state: down mac: 
  Message: Output throttled. IPs: 1! Limit: 10! Override: --limit [1-x!-1 all]
  IF-ID-5: veth1580cb0 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-6: veth1e6fb83 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-7: veth4ddf387 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-8: veth648fe1c state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-9: veth6f5ba15 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-10: vethb9f0849 state: up speed: 10000 Mbps duplex: full mac: 
  WAN IP: 
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address:  bt-v: 3.0 lmp-v: 5.0
    sub-v: 6119 hci-v: 5.0 rev: 156
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Can't use an undefined value as an ARRAY reference at ./inxi line 12301.

Benchmark #60297 - Brand: Western Digital Blue M.2