Benchmark #60310 - pibenchmarks.com

Brand: Western Digital SN570
SSD (M.2 NVMe)
#87 / 1,679
210
#209 / 1,679
#207 / 984
#194 / 281
24,779
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2022-06-10 19:12:01
#60,310
15,617
-9,162 (-58.67%)
Jelly_Knight
Western Digital Bluean Oratek Tofu board with a CM4 4GB Lite using M.2 connector

Storage Details
Western Digital SN570
SSD (M.2 NVMe)
232.6G
SSD
WDC
BlueSN570250GB
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi Compute Module 4 1.0
Raspberry Pi Compute Module 4 Rev 1.0
Raspberry Pi Foundation
ARMv7 v7l
4
1,500
500
4 GB
1,600

Operating System

Raspbian GNU/Linux 11 (bullseye)
armv7l

Benchmark Results
176 MB/s
350.09 MB/s
348.65 MB/s
12,579 IOPS
26,701 IOPS
50,319 KB/s
106,805 KB/s
79,367 KB/s
57,034 KB/s
41,850 KB/s
84,511 KB/s

inxi Results
System: Kernel: 5.15.32-v7l+ arch: armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=c8fa92b2-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 1 DM: LightDM v: 1.26.0 Distro: Raspbian GNU/Linux 11 (bullseye) Machine: Type: ARM System: Raspberry Pi Compute Module 4 Rev 1.0 details: BCM2711 rev: c03140 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.82 GiB used: 474.9 MiB (12.1%) gpu: 76 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 3 Topology: cpus: 1x cores: 4 smt: N/A cache: N/A Speed (MHz): avg: 900 min/max: 600/1500 scaling: driver: cpufreq-dt governor: ondemand cores: 1: 900 2: 900 3: 900 4: 900 bogomips: 1080 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Not affected Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: x11 server: X.org v: 1.20.11 with: Xwayland compositor: Mutter v: 3.38.6 driver: X: loaded: modesetting unloaded: fbdev gpu: vc4_hdmi,vc4_hdmi,vc4_drm tty: 80x40 Message: Unable to show GL data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Sound Server-1: ALSA v: k5.15.32-v7l+ running: yes Sound Server-2: PulseAudio v: 14.2 running: yes Sound Server-3: PipeWire v: 0.3.19 running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept service-classes: rendering, capturing, audio Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Can't use an undefined value as an ARRAY reference at ./inxi line 12301.

inxi Results

System:
  Kernel: 5.15.32-v7l+ arch: armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M
    8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1
    smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000
    console=ttyS0,115200 console=tty1 root=PARTUUID=c8fa92b2-02 rootfstype=ext4 fsck.repair=yes
    rootwait quiet splash plymouth.ignore-serial-consoles
  Console: tty 1 DM: LightDM v: 1.26.0 Distro: Raspbian GNU/Linux 11 (bullseye)
Machine:
  Type: ARM System: Raspberry Pi Compute Module 4 Rev 1.0 details: BCM2711 rev: c03140
    Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 3.82 GiB used: 474.9 MiB (12.1%) gpu: 76 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0
    stepping: 3
  Topology: cpus: 1x cores: 4 smt: N/A cache: N/A
  Speed (MHz): avg: 900 min/max: 600/1500 scaling: driver: cpufreq-dt governor: ondemand cores:
    1: 900 2: 900 3: 900 4: 900 bogomips: 1080
  Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: spec_store_bypass status: Not affected
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 status: Vulnerable
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700
    class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700
    class-ID: hdmi
  Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu
  Display: x11 server: X.org v: 1.20.11 with: Xwayland compositor: Mutter v: 3.38.6 driver: X:
    loaded: modesetting unloaded: fbdev gpu: vc4_hdmi,vc4_hdmi,vc4_drm tty: 80x40
  Message: Unable to show GL data. Required tool glxinfo missing.
Audio:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi
  Device-3: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio
    class-ID: bcm2835_audio
  Sound Server-1: ALSA v: k5.15.32-v7l+ running: yes
  Sound Server-2: PulseAudio v: 14.2 running: yes
  Sound Server-3: PipeWire v: 0.3.19 running: yes
Network:
  Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000
    class-ID: mmcnr
  IF: wlan0 state: up mac: 
  IP v4:  type: dynamic noprefixroute scope: global broadcast: 
  IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global
  IP v6:  scope: link
  Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
    chip-ID: brcm:fd580000 class-ID: ethernet
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 
  IP v4:  type: dynamic noprefixroute scope: global broadcast: 
  IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global
  IP v6:  scope: link
  WAN IP: 
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address:  bt-v: 3.0 lmp-v: 5.0
    sub-v: 6119 hci-v: 5.0 rev: 156
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept
    service-classes: rendering, capturing, audio
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Can't use an undefined value as an ARRAY reference at ./inxi line 12301.

Benchmark #60310 - Brand: Western Digital SN570