Benchmark #60320 - pibenchmarks.com

Brand: Western Digital SN570
SSD (M.2 NVMe)
#88 / 1,700
216
#214 / 1,700
#212 / 989
#198 / 284
25,357
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2022-06-11 02:51:37
#60,320
18,559
-6,798 (-36.63%)
Jelly_Knight
WD Blue SN570 250GB NVMe SSD on Oratek Tofu board M.2 connector with CM4 4GB Lite (Maximum overclock)

Storage Details
Western Digital SN570
SSD (M.2 NVMe)
232.6G
SSD
WDC
BlueSN570250GB
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi Compute Module 4 1.0
Raspberry Pi Compute Module 4 Rev 1.0
Raspberry Pi Foundation
ARMv7 v7l
4
2,147 (+647)
750 (+250)
4 GB
1,600

Operating System

Raspbian GNU/Linux 11 (bullseye)
armv7l

Benchmark Results
236 MB/s
354.48 MB/s
354.31 MB/s
16,241 IOPS
33,907 IOPS
64,964 KB/s
135,629 KB/s
89,846 KB/s
74,455 KB/s
47,376 KB/s
96,243 KB/s

inxi Results
System: Kernel: 5.15.32-v7l+ arch: armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=c8fa92b2-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 1 DM: LightDM v: 1.26.0 Distro: Raspbian GNU/Linux 11 (bullseye) Machine: Type: ARM System: Raspberry Pi Compute Module 4 Rev 1.0 details: BCM2711 rev: c03140 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.82 GiB used: 459.5 MiB (11.7%) gpu: 76 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 3 Topology: cpus: 1x cores: 4 smt: N/A cache: N/A Speed (MHz): avg: 1300 min/max: 600/2200 scaling: driver: cpufreq-dt governor: ondemand cores: 1: 1300 2: 1300 3: 1300 4: 1300 bogomips: 1584 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Not affected Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: x11 server: X.org v: 1.20.11 with: Xwayland compositor: Mutter v: 3.38.6 driver: X: loaded: modesetting unloaded: fbdev gpu: vc4_hdmi,vc4_hdmi,vc4_drm tty: 80x40 Message: Unable to show GL data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Sound Server-1: ALSA v: k5.15.32-v7l+ running: yes Sound Server-2: PulseAudio v: 14.2 running: yes Sound Server-3: PipeWire v: 0.3.19 running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept service-classes: rendering, capturing, audio Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Can't use an undefined value as an ARRAY reference at ./inxi line 12301.

inxi Results

System:
  Kernel: 5.15.32-v7l+ arch: armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M
    8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1
    smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000
    console=ttyS0,115200 console=tty1 root=PARTUUID=c8fa92b2-02 rootfstype=ext4 fsck.repair=yes
    rootwait quiet splash plymouth.ignore-serial-consoles
  Console: tty 1 DM: LightDM v: 1.26.0 Distro: Raspbian GNU/Linux 11 (bullseye)
Machine:
  Type: ARM System: Raspberry Pi Compute Module 4 Rev 1.0 details: BCM2711 rev: c03140
    Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 3.82 GiB used: 459.5 MiB (11.7%) gpu: 76 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0
    stepping: 3
  Topology: cpus: 1x cores: 4 smt: N/A cache: N/A
  Speed (MHz): avg: 1300 min/max: 600/2200 scaling: driver: cpufreq-dt governor: ondemand cores:
    1: 1300 2: 1300 3: 1300 4: 1300 bogomips: 1584
  Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: spec_store_bypass status: Not affected
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 status: Vulnerable
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700
    class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700
    class-ID: hdmi
  Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu
  Display: x11 server: X.org v: 1.20.11 with: Xwayland compositor: Mutter v: 3.38.6 driver: X:
    loaded: modesetting unloaded: fbdev gpu: vc4_hdmi,vc4_hdmi,vc4_drm tty: 80x40
  Message: Unable to show GL data. Required tool glxinfo missing.
Audio:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi
  Device-3: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio
    class-ID: bcm2835_audio
  Sound Server-1: ALSA v: k5.15.32-v7l+ running: yes
  Sound Server-2: PulseAudio v: 14.2 running: yes
  Sound Server-3: PipeWire v: 0.3.19 running: yes
Network:
  Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000
    class-ID: mmcnr
  IF: wlan0 state: up mac: 
  IP v4:  type: dynamic noprefixroute scope: global broadcast: 
  IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global
  IP v6:  scope: link
  Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
    chip-ID: brcm:fd580000 class-ID: ethernet
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 
  IP v4:  type: dynamic noprefixroute scope: global broadcast: 
  IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global
  IP v6:  scope: link
  WAN IP: 
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address:  bt-v: 3.0 lmp-v: 5.0
    sub-v: 6119 hci-v: 5.0 rev: 156
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept
    service-classes: rendering, capturing, audio
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Can't use an undefined value as an ARRAY reference at ./inxi line 12301.

Benchmark #60320 - Brand: Western Digital SN570