Benchmark #60335 - pibenchmarks.com

Brand: Crucial MX500 Series
SSD (2.5" SATA)
#19 / 1,539
490
#386 / 1,539
#370 / 875
#73 / 363
6,859
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2022-06-11 17:37:30
#60,335
4,184
-2,675 (-63.93%)
Anonymous

Storage Details
Crucial MX500 Series
SSD (2.5" SATA)
1000G
SSD
Crucial
CT1000MX500SSD1
2.5 inch
SATA
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
ARMv7 v7l
4
1,500
500
4 GB
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
74.1 MB/s
259.53 MB/s
256.87 MB/s
3,274 IOPS
7,573 IOPS
13,096 KB/s
30,295 KB/s
15,448 KB/s
13,279 KB/s
15,445 KB/s
18,913 KB/s

inxi Results
System: Kernel: 5.10.103-v7l+ arch: armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=tty1 root=PARTUUID=435dfbe6-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: Openbox v: 3.6.1 info: lxpanel dm: LightDM v: 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2711 rev: c03114 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.82 GiB used: 571.3 MiB (14.6%) gpu: 128 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 3 Topology: cpus: 1x cores: 4 smt: N/A cache: N/A Speed (MHz): avg: 700 min/max: 600/1500 scaling: driver: cpufreq-dt governor: ondemand cores: 1: 700 2: 700 3: 700 4: 700 bogomips: 1080 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc class-ID: fb Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: x11 server: X.Org v: 1.20.4 driver: X: loaded: fbturbo gpu: bcm2708_fb display-ID: :0.0 screens: 1 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x286mm (20.00x11.26") s-diag: 583mm (22.95") Monitor-1: default res: 1920x1080 size: N/A modes: N/A Message: Unable to show GL data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.103-v7l+ running: yes Sound Server-2: PulseAudio v: 12.2 running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: noprefixroute scope: link Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: down mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept service-classes: capturing, telephony Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Can't use an undefined value as an ARRAY reference at ./inxi line 12301.

inxi Results

System:
  Kernel: 5.10.103-v7l+ arch: armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M
    8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1
    bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1
    smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000
    console=tty1 root=PARTUUID=435dfbe6-02 rootfstype=ext4 elevator=deadline fsck.repair=yes
    rootwait quiet splash plymouth.ignore-serial-consoles
  Desktop: Openbox v: 3.6.1 info: lxpanel dm: LightDM v: 1.26.0
    Distro: Raspbian GNU/Linux 10 (buster)
Machine:
  Type: ARM System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2711 rev: c03114 Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 3.82 GiB used: 571.3 MiB (14.6%) gpu: 128 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0
    stepping: 3
  Topology: cpus: 1x cores: 4 smt: N/A cache: N/A
  Speed (MHz): avg: 700 min/max: 600/1500 scaling: driver: cpufreq-dt governor: ondemand cores:
    1: 700 2: 700 3: 700 4: 700 bogomips: 1080
  Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4
  Vulnerabilities: No CPU vulnerability/bugs data available.
Graphics:
  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc class-ID: fb
  Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
  Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
  Display: x11 server: X.Org v: 1.20.4 driver: X: loaded: fbturbo gpu: bcm2708_fb
    display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x286mm (20.00x11.26") s-diag: 583mm (22.95")
  Monitor-1: default res: 1920x1080 size: N/A modes: N/A
  Message: Unable to show GL data. Required tool glxinfo missing.
Audio:
  Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio
    class-ID: bcm2835_audio
  Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
  Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
  Sound Server-1: ALSA v: k5.10.103-v7l+ running: yes
  Sound Server-2: PulseAudio v: 12.2 running: yes
Network:
  Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000
    class-ID: mmcnr
  IF: wlan0 state: up mac: 
  IP v4:  type: dynamic noprefixroute scope: global broadcast: 
  IP v6:  type: noprefixroute scope: link
  Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
    chip-ID: brcm:fd580000 class-ID: ethernet
  IF: eth0 state: down mac: 
  WAN IP: 
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address:  bt-v: 3.0 lmp-v: 5.0
    sub-v: 6119 hci-v: 5.0 rev: 156
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept
    service-classes: capturing, telephony
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Can't use an undefined value as an ARRAY reference at ./inxi line 12301.

Benchmark #60335 - Brand: Crucial MX500 Series