Benchmark #60533 - pibenchmarks.com

Brand: Kingston SD Canvas Go! Plus (SD64G)
A2 C10 V30 U3
#73 / 1,539
142
#947 / 1,539
#14 / 369
2,103
	Amazon.com AliExpress Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2022-06-19 03:13:38
#60,533
2,159
+56 (+2.59%)
Oligarch
Kingston SD Canvas Go! Plus (SD64G)

Secure Digital (SD) Card Details
Kingston SD Canvas Go! Plus (SD64G)
A2 C10 V30 U3
57.6G
SD
Kingston
SD64G
SD
6.00
0x9f
TI
6.1
01/2022
Class 10
A2
U3
V30

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
N/A
4
1,500
500
4 GB
1,600
42 (-9)

Operating System

Debian GNU/Linux 11 (bullseye)
aarch64

Benchmark Results
31.2 MB/s
42.39 MB/s
42.36 MB/s
1,992 IOPS
3,924 IOPS
7,968 KB/s
15,696 KB/s
17,203 KB/s
6,162 KB/s
14,085 KB/s
6,889 KB/s

inxi Results
System: Kernel: 5.10.0-11-arm64 arch: aarch64 bits: 64 compiler: gcc v: 10.2.1 parameters: video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 dma.dmachans=0x37f5 bcm2709.boardrev=0xc03111 bcm2709.serial=0x75b955c3 bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty0 console=ttyS1,115200 root=LABEL=RASPIROOT rw fsck.repair=yes net.ifnames=0 rootwait Console: tty 1 Distro: Debian GNU/Linux 11 (bullseye) Machine: Type: ARM System: Raspberry Pi 4 Model B Rev 1.1 details: N/A Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.7 GiB used: 313.9 MiB (8.3%) RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 Topology: cpus: 1x cores: 4 smt: cache: N/A Speed (MHz): avg: 825 high: 1200 min/max: 600/1500 scaling: driver: cpufreq-dt governor: schedutil cores: 1: 1200 2: 900 3: 600 4: 600 bogomips: 432 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: No display server data found. Headless machine? tty: 80x40 Message: GL data unavailable in console for root. Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Sound Server-1: ALSA v: k5.10.0-11-arm64 running: yes Network: Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic scope: global broadcast: IP v6: scope: link Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq IF-ID-1: wlan0 state: down mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: hardware: no software: no address: see --recommends Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial Report: This feature requires one of these tools: hciconfig/bt-adapter Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 57.95 GiB used: 1.91 GiB (3.3%) ID-1: /dev/mmcblk1 maj-min: 179:0 vendor: SanDisk model: SD64G size: 57.95 GiB block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. Message: No optical or floppy data found. Partition: ID-1: / raw-size: 57.56 GiB size: 56.66 GiB (98.43%) used: 1.79 GiB (3.2%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk1p2 maj-min: 179:2 label: RASPIROOT uuid: d850171d-fc25-4fe3-b6ea-5fe2bca1d86b ID-2: /boot/firmware raw-size: 396 MiB size: 395.8 MiB (99.94%) used: 126.7 MiB (32.0%) fs: vfat block-size: 512 B dev: /dev/mmcblk1p1 maj-min: 179:1 label: RASPIFIRM uuid: A4ED-003B Swap: Alert: No swap data was found. Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.3:3 info: Pixart Imaging Optical Mouse type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s power: 100mA chip-ID: 093a:2510 class-ID: 0301 Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 601 lib: 415 Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian bullseye main contrib non-free 2: deb http: //security.debian.org/debian-security bullseye-security main contrib non-free Processes: CPU top: 5 of 118 1: cpu: 1.3% command: [kworker/u8:4-ext4-rsv-conversion] pid: 23412 mem: 0.00 MiB (0.0%) 2: cpu: 0.3% command: smartd pid: 23186 mem: 4.72 MiB (0.1%) 3: cpu: 0.2% command: sshd: pid: 14746 mem: 7.75 MiB (0.2%) 4: cpu: 0.2% command: [kworker/u8:2-events_unbound] pid: 14756 mem: 0.00 MiB (0.0%) 5: cpu: 0.1% command: [kworker/u8:3-flush-179:0] pid: 2118 mem: 0.00 MiB (0.0%) Memory top: 5 of 118 1: mem: 13.0 MiB (0.3%) command: udisksd pid: 18332 cpu: 0.0% 2: mem: 9.81 MiB (0.2%) command: systemd-journald pid: 10833 cpu: 0.0% 3: mem: 9.73 MiB (0.2%) command: systemd pid: 1 cpu: 0.0% 4: mem: 7.75 MiB (0.2%) command: sshd: pid: 14746 cpu: 0.2% 5: mem: 7.48 MiB (0.1%) command: sshd: pid: 2108 cpu: 0.0% Info: Processes: 118 Uptime: 23h 34m Init: systemd v: 247 target: graphical (5) default: graphical tool: systemctl Compilers: gcc: N/A Client: shell wrapper v: 5.1.4-release inxi: 3.3.19

inxi Results

System:
  Kernel: 5.10.0-11-arm64 arch: aarch64 bits: 64 compiler: gcc v: 10.2.1
    parameters: video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48
    dma.dmachans=0x37f5 bcm2709.boardrev=0xc03111 bcm2709.serial=0x75b955c3
    bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0
    smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000
    console=tty0 console=ttyS1,115200 root=LABEL=RASPIROOT rw fsck.repair=yes net.ifnames=0
    rootwait
  Console: tty 1 Distro: Debian GNU/Linux 11 (bullseye)
Machine:
  Type: ARM System: Raspberry Pi 4 Model B Rev 1.1 details: N/A Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 3.7 GiB used: 313.9 MiB (8.3%)
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0
    stepping: 3
  Topology: cpus: 1x cores: 4 smt:  cache: N/A
  Speed (MHz): avg: 825 high: 1200 min/max: 600/1500 scaling: driver: cpufreq-dt
    governor: schedutil cores: 1: 1200 2: 900 3: 600 4: 600 bogomips: 432
  Features: asimd cpuid crc32 evtstrm fp
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 status: Vulnerable
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700
    class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700
    class-ID: hdmi
  Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu
  Display: server: No display server data found. Headless machine? tty: 80x40
  Message: GL data unavailable in console for root.
Audio:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi
  Sound Server-1: ALSA v: k5.10.0-11-arm64 running: yes
Network:
  Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000
    class-ID: ethernet
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 
  IP v4:  type: dynamic scope: global broadcast: 
  IP v6:  scope: link
  Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A
    chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq
  IF-ID-1: wlan0 state: down mac: 
  WAN IP: 
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
  Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: hardware: no
    software: no address: see --recommends
  Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial
  Report: This feature requires one of these tools: hciconfig/bt-adapter
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 57.95 GiB used: 1.91 GiB (3.3%)
  ID-1: /dev/mmcblk1 maj-min: 179:0 vendor: SanDisk model: SD64G size: 57.95 GiB block-size:
    physical: 512 B logical: 512 B type: SSD scheme: MBR
  SMART Message: Unknown smartctl error. Unable to generate data.
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 57.56 GiB size: 56.66 GiB (98.43%) used: 1.79 GiB (3.2%) fs: ext4
    block-size: 4096 B dev: /dev/mmcblk1p2 maj-min: 179:2 label: RASPIROOT
    uuid: d850171d-fc25-4fe3-b6ea-5fe2bca1d86b
  ID-2: /boot/firmware raw-size: 396 MiB size: 395.8 MiB (99.94%) used: 126.7 MiB (32.0%)
    fs: vfat block-size: 512 B dev: /dev/mmcblk1p1 maj-min: 179:1 label: RASPIFIRM uuid: A4ED-003B
Swap:
  Alert: No swap data was found.
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA
    chip-ID: 2109:3431 class-ID: 0900
  Device-1: 1-1.3:3 info: Pixart Imaging Optical Mouse type: Mouse driver: hid-generic,usbhid
    interfaces: 1 rev: 2.0 speed: 1.5 Mb/s power: 100mA chip-ID: 093a:2510 class-ID: 0301
  Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003
    class-ID: 0900
Sensors:
  Missing: Required tool sensors not installed. Check --recommends
Repos:
  Packages: apt: 601 lib: 415
  Active apt repos in: /etc/apt/sources.list
    1: deb http: //deb.debian.org/debian bullseye main contrib non-free
    2: deb http: //security.debian.org/debian-security bullseye-security main contrib non-free
Processes:
  CPU top: 5 of 118
  1: cpu: 1.3% command: [kworker/u8:4-ext4-rsv-conversion] pid: 23412 mem: 0.00 MiB (0.0%)
  2: cpu: 0.3% command: smartd pid: 23186 mem: 4.72 MiB (0.1%)
  3: cpu: 0.2% command: sshd: pid: 14746 mem: 7.75 MiB (0.2%)
  4: cpu: 0.2% command: [kworker/u8:2-events_unbound] pid: 14756 mem: 0.00 MiB (0.0%)
  5: cpu: 0.1% command: [kworker/u8:3-flush-179:0] pid: 2118 mem: 0.00 MiB (0.0%)
  Memory top: 5 of 118
  1: mem: 13.0 MiB (0.3%) command: udisksd pid: 18332 cpu: 0.0%
  2: mem: 9.81 MiB (0.2%) command: systemd-journald pid: 10833 cpu: 0.0%
  3: mem: 9.73 MiB (0.2%) command: systemd pid: 1 cpu: 0.0%
  4: mem: 7.75 MiB (0.2%) command: sshd: pid: 14746 cpu: 0.2%
  5: mem: 7.48 MiB (0.1%) command: sshd: pid: 2108 cpu: 0.0%
Info:
  Processes: 118 Uptime: 23h 34m Init: systemd v: 247 target: graphical (5) default: graphical
  tool: systemctl Compilers: gcc: N/A Client: shell wrapper v: 5.1.4-release inxi: 3.3.19

Benchmark #60533 - Brand: Kingston SD Canvas Go! Plus (SD64G)