Benchmark #6084 - pibenchmarks.com

Brand: Generic USB Disk
USB Flash
#20 / 1,700
691
#957 / 1,700
#6 / 94
#9 / 89
3,996
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-01-01 08:50:44
#6,084
4,601
+605 (+13.15%)
Anonymous

Storage Details
Generic USB Disk
USB Flash
111.5G
USB Flash
Generic
GenericFlashDisk
2109:0711
0x2109
0x0711 (SMCWUSBT-G (no firmware))
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
143 MB/s
121.23 MB/s
125.97 MB/s
4,042 IOPS
3,494 IOPS
16,170 KB/s
13,977 KB/s
19,630 KB/s
10,422 KB/s
15,396 KB/s
16,767 KB/s

inxi Results
System: Host: Pi0-SERVER Kernel: 4.19.75-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty1 root=PARTUUID=2d9d7730-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.88 GiB used: 168.0 MiB (4.2%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 117x70 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 126.77 GiB used: 16.15 GiB (12.7%) ID-1: /dev/mmcblk0 model: USD size: 14.98 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB model: USB3.0 high speed size: 111.79 GiB block size: physical: 512 B logical: 512 B rev: 2210 scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 111.54 GiB size: 109.28 GiB (97.98%) used: 16.10 GiB (14.7%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: footfs uuid: 4e803d56-bab3-451b-87e6-46de21807585 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.9 MiB (20.6%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 Unmounted: ID-1: /dev/mmcblk0p2 size: 14.73 GiB fs: ext4 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: BOOT uuid: F279-2886 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: VIA Labs type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 2109:0711 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 4.3% command: init pid: 1 mem: 7.76 MiB (0.1%) 2: cpu: 0.9% command: fail2ban-server started by: python3 pid: 363 mem: 14.5 MiB (0.3%) 3: cpu: 0.8% command: systemd-udevd pid: 146 mem: 3.80 MiB (0.0%) 4: cpu: 0.8% command: systemd-journald pid: 280 mem: 6.79 MiB (0.1%) 5: cpu: 0.7% command: [usb-storage] pid: 80 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 25.7 MiB (0.6%) command: rpc.mountd pid: 377 cpu: 0.0% 2: mem: 15.5 MiB (0.3%) command: unattended-upgrade-shutdown started by: python3 pid: 348 cpu: 0.6% 3: mem: 14.5 MiB (0.3%) command: fail2ban-server started by: python3 pid: 363 cpu: 0.9% 4: mem: 7.76 MiB (0.1%) command: init pid: 1 cpu: 4.3% 5: mem: 6.79 MiB (0.1%) command: systemd-journald pid: 280 cpu: 0.8% Info: Processes: 130 Uptime: 1m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: Pi0-SERVER Kernel: 4.19.75-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M bcm2708_fb.fbwidth=0 
           bcm2708_fb.fbheight=0 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 
           vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty1 root=PARTUUID=2d9d7730-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.88 GiB used: 168.0 MiB (4.2%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 117x70 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 126.77 GiB used: 16.15 GiB (12.7%) 
           ID-1: /dev/mmcblk0 model: USD size: 14.98 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB model: USB3.0 high speed size: 111.79 GiB block size: 
           physical: 512 B logical: 512 B rev: 2210 scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 111.54 GiB size: 109.28 GiB (97.98%) used: 16.10 GiB (14.7%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: footfs 
           uuid: 4e803d56-bab3-451b-87e6-46de21807585 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.9 MiB (20.6%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 
Unmounted: ID-1: /dev/mmcblk0p2 size: 14.73 GiB fs: ext4 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: BOOT uuid: F279-2886 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: VIA Labs type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 3.0 speed: 5 Gb/s chip ID: 2109:0711 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 4.3% command: init pid: 1 mem: 7.76 MiB (0.1%) 
           2: cpu: 0.9% command: fail2ban-server started by: python3 pid: 363 mem: 14.5 MiB (0.3%) 
           3: cpu: 0.8% command: systemd-udevd pid: 146 mem: 3.80 MiB (0.0%) 
           4: cpu: 0.8% command: systemd-journald pid: 280 mem: 6.79 MiB (0.1%) 
           5: cpu: 0.7% command: [usb-storage] pid: 80 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 25.7 MiB (0.6%) command: rpc.mountd pid: 377 cpu: 0.0% 
           2: mem: 15.5 MiB (0.3%) command: unattended-upgrade-shutdown started by: python3 
           pid: 348 cpu: 0.6% 
           3: mem: 14.5 MiB (0.3%) command: fail2ban-server started by: python3 pid: 363 cpu: 0.9% 
           4: mem: 7.76 MiB (0.1%) command: init pid: 1 cpu: 4.3% 
           5: mem: 6.79 MiB (0.1%) command: systemd-journald pid: 280 cpu: 0.8% 
Info:      Processes: 130 Uptime: 1m Init: systemd v: 241 runlevel: 3 target: multi-user.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

Benchmark #6084 - Brand: Generic USB Disk