Benchmark #60967 - pibenchmarks.com

Brand: SanDisk SD Extreme Pro A1 (SP32G)
A1 C10 V30 U3
#55 / 1,677
308
#1,148 / 1,677
#65 / 393
1,608
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2022-07-07 01:44:44
#60,967
1,245
-363 (-29.16%)
Anonymous
Sandisk extreme pro 32gb, Pi Zero W2

Secure Digital (SD) Card Details
SanDisk SD Extreme Pro A1 (SP32G)
A1 C10 V30 U3
29.5G
SD
SanDisk
SP32G
SDHC
5.00
0x03
SD
8.0
02/2019
Class 10
A1
U3
V30

System Board Details
		Amazon.com AliExpress
Raspberry Pi Zero 2 W 1.0
Raspberry Pi Zero 2 W Rev 1.0
Raspberry Pi Foundation
ARMv7 v7l
4
1,000
400
512 MB
450
50

Operating System

Raspbian GNU/Linux 11 (bullseye)
armv7l

Benchmark Results
20.2 MB/s
21.67 MB/s
21.67 MB/s
1,189 IOPS
2,407 IOPS
4,756 KB/s
9,628 KB/s
7,710 KB/s
2,677 KB/s
7,493 KB/s
4,224 KB/s

inxi Results
System: Kernel: 5.15.32-v7+ arch: armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1280x1024M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 console=ttyS0,115200 console=tty1 root=PARTUUID=c405e09b-02 rootfstype=ext4 fsck.repair=yes rootwait Console: tty 1 Distro: Raspbian GNU/Linux 11 (bullseye) Machine: Type: ARM System: Raspberry Pi Zero 2 W Rev 1.0 details: BCM2835 rev: 902120 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 491.9 MiB used: 185.5 MiB (37.7%) gpu: 64 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 4 Topology: cpus: 1x cores: 4 smt: N/A cache: N/A Speed (MHz): avg: 800 min/max: 600/1000 scaling: driver: cpufreq-dt governor: ondemand cores: 1: 800 2: 800 3: 800 4: 800 bogomips: 256 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Not affected Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Not affected Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2835-hdmi driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:3f902000 class-ID: hdmi Device-2: bcm2835-vc4 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: gpu Display: server: No display server data found. Headless machine? tty: 80x40 Monitor-1: HDMI-A-1 model: Dell P1914S built: 2014 res: 1280x1024 dpi: 86 gamma: 1.2 chroma: red: x: 0.639 y: 0.329 green: x: 0.298 y: 0.600 blue: x: 0.149 y: 0.059 white: x: 0.314 y: 0.329 size: 376x301mm (14.8x11.85") diag: 482mm (19") ratio: 5:4 modes: 1280x1024, 1152x864, 1024x768, 800x600, 640x480, 720x400 Message: Unable to show GL data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:3f902000 class-ID: hdmi Device-2: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Sound Server-1: ALSA v: k5.15.32-v7+ running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:3f300000 class-ID: mmcnr IF: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:3f201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: bt-v: 2.1 lmp-v: 4.2 sub-v: 410c hci-v: 4.2 rev: 5c Info: acl-mtu: 1021:7 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 29.72 GiB used: 1.52 GiB (5.1%) ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: Samsung model: SP32G size: 29.72 GiB block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. Message: No optical or floppy data found. Partition: ID-1: / raw-size: 29.47 GiB size: 28.98 GiB (98.32%) used: 1.47 GiB (5.1%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs uuid: 99f9cf68-e6fa-4b90-aeee-7fa3e9ed5c2d ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 49.2 MiB (19.5%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: F021-066F Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 8 MiB (8.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Device-1: 1-1:2 info: SINO WEALTH USB KEYBOARD type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s power: 100mA chip-ID: 258a:6a88 class-ID: 0300 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 585 lib: 314 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ bullseye main Processes: CPU top: 5 of 129 1: cpu: 4.5% command: init pid: 1 mem: 8.11 MiB (1.8%) 2: cpu: 1.3% command: [kworker/u9:1-brcmf_wq/mmc1:0001:1] pid: 226 mem: 0.00 MiB (0.0%) 3: cpu: 1.0% command: [kworker/0:1-mm_percpu_wq] pid: 33 mem: 0.00 MiB (0.0%) 4: cpu: 0.8% command: [kworker/u8:0-events_unbound] pid: 7 mem: 0.00 MiB (0.0%) 5: cpu: 0.6% command: [kworker/1:1-mm_percpu_wq] pid: 35 mem: 0.00 MiB (0.0%) Memory top: 5 of 129 1: mem: 8.51 MiB (1.9%) command: systemd-journald pid: 134 cpu: 0.3% 2: mem: 8.11 MiB (1.8%) command: init pid: 1 cpu: 4.5% 3: mem: 7.43 MiB (1.7%) command: bluetoothd pid: 625 cpu: 0.0% 4: mem: 6.65 MiB (1.5%) command: systemd pid: 628 cpu: 0.1% 5: mem: 5.21 MiB (1.2%) command: systemd-logind pid: 384 cpu: 0.2% Info: Processes: 129 Uptime: 4m Init: systemd v: 247 target: multi-user (3) default: multi-user tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.19

inxi Results

System:
  Kernel: 5.15.32-v7+ arch: armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M
    8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1
    video=HDMI-A-1:1280x1024M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x1ec00000
    vc_mem.mem_size=0x20000000 console=ttyS0,115200 console=tty1 root=PARTUUID=c405e09b-02
    rootfstype=ext4 fsck.repair=yes rootwait
  Console: tty 1 Distro: Raspbian GNU/Linux 11 (bullseye)
Machine:
  Type: ARM System: Raspberry Pi Zero 2 W Rev 1.0 details: BCM2835 rev: 902120 Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 491.9 MiB used: 185.5 MiB (37.7%) gpu: 64 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: 0
    stepping: 4
  Topology: cpus: 1x cores: 4 smt: N/A cache: N/A
  Speed (MHz): avg: 800 min/max: 600/1000 scaling: driver: cpufreq-dt governor: ondemand cores:
    1: 800 2: 800 3: 800 4: 800 bogomips: 256
  Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: spec_store_bypass status: Not affected
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 status: Not affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2835-hdmi driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:3f902000 class-ID: hdmi
  Device-2: bcm2835-vc4 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: gpu
  Display: server: No display server data found. Headless machine? tty: 80x40
  Monitor-1: HDMI-A-1 model: Dell P1914S built: 2014 res: 1280x1024 dpi: 86
    gamma: 1.2 chroma: red: x: 0.639 y: 0.329 green: x: 0.298 y: 0.600 blue: x: 0.149 y: 0.059
    white: x: 0.314 y: 0.329 size: 376x301mm (14.8x11.85") diag: 482mm (19") ratio: 5:4
    modes: 1280x1024, 1152x864, 1024x768, 800x600, 640x480, 720x400
  Message: Unable to show GL data. Required tool glxinfo missing.
Audio:
  Device-1: bcm2835-hdmi driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:3f902000 class-ID: hdmi
  Device-2: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio
    class-ID: bcm2835_audio
  Sound Server-1: ALSA v: k5.15.32-v7+ running: yes
Network:
  Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:3f300000
    class-ID: mmcnr
  IF: wlan0 state: up mac: 
  IP v4:  type: dynamic noprefixroute scope: global broadcast: 
  IP v6:  scope: link
  WAN IP: 
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:3f201000 class-ID: serial
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address:  bt-v: 2.1 lmp-v: 4.2
    sub-v: 410c hci-v: 4.2 rev: 5c
  Info: acl-mtu: 1021:7 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 29.72 GiB used: 1.52 GiB (5.1%)
  ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: Samsung model: SP32G size: 29.72 GiB block-size:
    physical: 512 B logical: 512 B type: SSD scheme: MBR
  SMART Message: Unknown smartctl error. Unable to generate data.
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 29.47 GiB size: 28.98 GiB (98.32%) used: 1.47 GiB (5.1%) fs: ext4
    block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs
    uuid: 99f9cf68-e6fa-4b90-aeee-7fa3e9ed5c2d
  ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 49.2 MiB (19.5%) fs: vfat
    block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: F021-066F
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 100 MiB used: 8 MiB (8.0%) priority: -2 file: /var/swap
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 1-1:2 info: SINO WEALTH USB KEYBOARD type: Keyboard,HID driver: hid-generic,usbhid
    interfaces: 2 rev: 1.1 speed: 1.5 Mb/s power: 100mA chip-ID: 258a:6a88 class-ID: 0300
Sensors:
  Missing: Required tool sensors not installed. Check --recommends
Repos:
  Packages: apt: 585 lib: 314
  Active apt repos in: /etc/apt/sources.list
    1: deb http: //raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-free rpi
  Active apt repos in: /etc/apt/sources.list.d/raspi.list
    1: deb http: //archive.raspberrypi.org/debian/ bullseye main
Processes:
  CPU top: 5 of 129
  1: cpu: 4.5% command: init pid: 1 mem: 8.11 MiB (1.8%)
  2: cpu: 1.3% command: [kworker/u9:1-brcmf_wq/mmc1:0001:1] pid: 226 mem: 0.00 MiB (0.0%)
  3: cpu: 1.0% command: [kworker/0:1-mm_percpu_wq] pid: 33 mem: 0.00 MiB (0.0%)
  4: cpu: 0.8% command: [kworker/u8:0-events_unbound] pid: 7 mem: 0.00 MiB (0.0%)
  5: cpu: 0.6% command: [kworker/1:1-mm_percpu_wq] pid: 35 mem: 0.00 MiB (0.0%)
  Memory top: 5 of 129
  1: mem: 8.51 MiB (1.9%) command: systemd-journald pid: 134 cpu: 0.3%
  2: mem: 8.11 MiB (1.8%) command: init pid: 1 cpu: 4.5%
  3: mem: 7.43 MiB (1.7%) command: bluetoothd pid: 625 cpu: 0.0%
  4: mem: 6.65 MiB (1.5%) command: systemd pid: 628 cpu: 0.1%
  5: mem: 5.21 MiB (1.2%) command: systemd-logind pid: 384 cpu: 0.2%
Info:
  Processes: 129 Uptime: 4m Init: systemd v: 247 target: multi-user (3) default: multi-user
  tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release
  inxi: 3.3.19

Benchmark #60967 - Brand: SanDisk SD Extreme Pro A1 (SP32G)