Benchmark #61031 - pibenchmarks.com

Brand: SanDisk SD High Endurance (SH32G)
A2 C10 V30 U3
#106 / 1,665
141
#1,338 / 1,665
#217 / 389
1,101
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2022-07-10 03:04:23
#61,031
1,190
+89 (+7.48%)
jamonduro
Sandisk MAX Endurance 32GB

Secure Digital (SD) Card Details
SanDisk SD High Endurance (SH32G)
A2 C10 V30 U3
29.5G
SD
SanDisk
SH32G
SDHC
6.00
0x03
SD
8.0
04/2022
Class 10
A2
U3
V30

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
N/A
4
1,500
500
4 GB
1,600
50

Operating System

Ubuntu 22.04 LTS
aarch64

Benchmark Results
27.6 MB/s
41.92 MB/s
41.03 MB/s
1,047 IOPS
2,981 IOPS
4,189 KB/s
11,924 KB/s
8,519 KB/s
2,408 KB/s
6,739 KB/s
3,111 KB/s

inxi Results
System: Kernel: 5.15.0-1011-raspi arch: aarch64 bits: 64 compiler: gcc v: 11.2.0 parameters: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 dwc_otg.lpm_enable=0 console=tty1 root=LABEL=writable rootfstype=ext4 rootwait fixrtc quiet splash Console: pty pts/0 Distro: Ubuntu 22.04 LTS (Jammy Jellyfish) Machine: Type: ARM System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.78 GiB used: 832.4 MiB (21.5%) gpu: 76 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 Topology: cpus: 1x cores: 4 smt: N/A cache: L1: 320 KiB desc: d-4x32 KiB! i-4x48 KiB L2: 1024 KiB desc: 1x1024 KiB Speed (MHz): avg: 600 min/max: 600/1500 scaling: driver: cpufreq-dt governor: ondemand cores: 1: 600 2: 600 3: 600 4: 600 bogomips: 432 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2708-fb driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: fb Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: web server: N/A driver: N/A tty: 80x40 Message: Unable to show GL data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.15.0-1011-raspi running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: down mac: Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic scope: global IP v6: scope: link IF-ID-1: br-122d201975b9 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: br-4f748c45dcdf state: down mac: Message: Output throttled. IPs: 1! Limit: 10! Override: --limit [1-x!-1 all] IF-ID-3: docker0 state: up speed: 10000 Mbps duplex: unknown mac: Message: Output throttled. IPs: 2! Limit: 10! Override: --limit [1-x!-1 all] IF-ID-4: veth45c5c07 state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: veth8086260 state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: vethd5ed028 state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: vethdfa36ca state: up speed: 10000 Mbps duplex: full mac: WAN IP: Bluetooth: Device-1: bcm2835-pl011 driver: uart_pl011 bus-ID: N/A chip-ID: brcm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: peripheral accept Logical: Message: No logical block device data found. RAID: Device-1: PIBackup type: zfs status: ONLINE level: linear raw: size: 928 GiB free: 726 GiB allocated: 202 GiB zfs-fs: size: 992.05 GiB free: 697.25 GiB Components: Online: 1: Use of uninitialized value $_ in regexp compilation at ./inxi line 24578. Use of uninitialized value $_ in regexp compilation at ./inxi line 24578. Use of uninitialized value $_ in regexp compilation at ./inxi line 24578. Use of uninitialized value $_ in regexp compilation at ./inxi line 24578. Drives: Local Storage: total: raw: 961.24 GiB usable: 2.81 TiB used: 203.86 GiB (7.1%) ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: Smart Modular Tech. model: SH32G size: 29.72 GiB block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Apple model: HDD HTS541010A9E662 size: 931.51 GiB block-size: physical: 4096 B logical: 512 B sata: 2.6 speed: 3.0 Gb/s type: HDD rpm: 5400 rev: JA0AB5D0 temp: 29 C scheme: GPT SMART: yes state: enabled health: PASSED on: 2y 234d 1h cycles: 2957 Message: No optical or floppy data found. Partition: ID-1: / raw-size: 29.47 GiB size: 28.96 GiB (98.26%) used: 6.2 GiB (21.4%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: writable uuid: a6ba7311-aab8-46ea-aad2-6a42bf57300d ID-2: /PIBackup raw-size: N/A size: 697.25 GiB used: 128 KiB (0.0%) fs: zfs logical: PIBackup ID-3: /PIBackup/Backup raw-size: N/A size: 801.97 GiB used: 197.52 GiB (24.6%) fs: zfs logical: PIBackup/Backup ID-4: /boot/firmware raw-size: 256 MiB size: 252 MiB (98.46%) used: 147.5 MiB (58.5%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: system-boot uuid: B084-2C85 Swap: Alert: No swap data was found. Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.3:3 info: Nam Tai E&E Products or OmniVision SCEH-0036 type: driver: dvb_usb_dib0700 interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: 1415:0003 class-ID: 0000 Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-2:2 info: ASMedia ASM1153 SATA 3Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip-ID: 174c:1153 class-ID: 0806 Hub-4: 3-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: 760 apt: 756 lib: 324 snap: 4 Active apt repos in: /etc/apt/sources.list 1: deb http: //ports.ubuntu.com/ubuntu-ports jammy main restricted 2: deb http: //ports.ubuntu.com/ubuntu-ports jammy-updates main restricted 3: deb http: //ports.ubuntu.com/ubuntu-ports jammy universe 4: deb http: //ports.ubuntu.com/ubuntu-ports jammy-updates universe 5: deb http: //ports.ubuntu.com/ubuntu-ports jammy multiverse 6: deb http: //ports.ubuntu.com/ubuntu-ports jammy-updates multiverse 7: deb http: //ports.ubuntu.com/ubuntu-ports jammy-backports main restricted universe multiverse 8: deb http: //ports.ubuntu.com/ubuntu-ports jammy-security main restricted 9: deb http: //ports.ubuntu.com/ubuntu-ports jammy-security universe 10: deb http: //ports.ubuntu.com/ubuntu-ports jammy-security multiverse Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=arm64 signed-by=/etc/apt/keyrings/docker.gpg] https: //download.docker.com/linux/ubuntu jammy stable Processes: CPU top: 5 of 276 1: cpu: 42.2% command: hass started by: python3 pid: 2234 mem: 187.1 MiB (4.9%) 2: cpu: 12.5% command: snapd pid: 1022 mem: 37.8 MiB (0.9%) 3: cpu: 3.5% command: bash pid: 3031 mem: 3.36 MiB (0.0%) 4: cpu: 3.1% command: cockpit-tls pid: 2844 mem: 5.14 MiB (0.1%) 5: cpu: 2.8% command: packagekitd pid: 2942 mem: 20.3 MiB (0.5%) Memory top: 5 of 276 1: mem: 187.1 MiB (4.9%) command: hass started by: python3 pid: 2234 cpu: 42.2% 2: mem: 73.3 MiB (1.9%) command: dockerd pid: 1223 cpu: 1.2% 3: mem: 48.5 MiB (1.2%) command: containerd pid: 1136 cpu: 0.5% 4: mem: 37.8 MiB (0.9%) command: snapd pid: 1022 cpu: 12.5% 5: mem: 34.2 MiB (0.9%) command: /portainer pid: 1929 cpu: 0.3% Info: Processes: 276 Uptime: 2m Init: systemd v: 249 target: graphical (5) default: graphical tool: systemctl Compilers: gcc: N/A Client: shell wrapper v: 5.1.16-release inxi: 3.3.19

inxi Results

System:
  Kernel: 5.15.0-1011-raspi arch: aarch64 bits: 64 compiler: gcc v: 11.2.0
    parameters: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0
    snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1
    smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000
    console=ttyS0,115200 dwc_otg.lpm_enable=0 console=tty1 root=LABEL=writable rootfstype=ext4
    rootwait fixrtc quiet splash
  Console: pty pts/0 Distro: Ubuntu 22.04 LTS (Jammy Jellyfish)
Machine:
  Type: ARM System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 3.78 GiB used: 832.4 MiB (21.5%) gpu: 76 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0
    stepping: 3
  Topology: cpus: 1x cores: 4 smt: N/A cache: L1: 320 KiB desc: d-4x32 KiB! i-4x48 KiB
    L2: 1024 KiB desc: 1x1024 KiB
  Speed (MHz): avg: 600 min/max: 600/1500 scaling: driver: cpufreq-dt governor: ondemand cores:
    1: 600 2: 600 3: 600 4: 600 bogomips: 432
  Features: asimd cpuid crc32 evtstrm fp
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 status: Vulnerable
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2708-fb driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: fb
  Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
  Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
  Display: web server: N/A driver: N/A tty: 80x40
  Message: Unable to show GL data. Required tool glxinfo missing.
Audio:
  Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio
    class-ID: bcm2835_audio
  Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
  Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
  Sound Server-1: ALSA v: k5.15.0-1011-raspi running: yes
Network:
  Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000
    class-ID: mmcnr
  IF: wlan0 state: down mac: 
  Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
    chip-ID: brcm:fd580000 class-ID: ethernet
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 
  IP v4:  type: dynamic scope: global
  IP v6:  scope: link
  IF-ID-1: br-122d201975b9 state: up speed: 10000 Mbps duplex: unknown mac: 
  IP v4:  scope: global broadcast: 
  IP v6:  scope: link
  IF-ID-2: br-4f748c45dcdf state: down mac: 
  Message: Output throttled. IPs: 1! Limit: 10! Override: --limit [1-x!-1 all]
  IF-ID-3: docker0 state: up speed: 10000 Mbps duplex: unknown mac: 
  Message: Output throttled. IPs: 2! Limit: 10! Override: --limit [1-x!-1 all]
  IF-ID-4: veth45c5c07 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-5: veth8086260 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-6: vethd5ed028 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-7: vethdfa36ca state: up speed: 10000 Mbps duplex: full mac: 
  WAN IP: 
Bluetooth:
  Device-1: bcm2835-pl011 driver: uart_pl011 bus-ID: N/A chip-ID: brcm:fe201000 class-ID: serial
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address:  bt-v: 3.0 lmp-v: 5.0
    sub-v: 6119 hci-v: 5.0 rev: 156
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: peripheral accept
Logical:
  Message: No logical block device data found.
RAID:
  Device-1: PIBackup type: zfs status: ONLINE level: linear raw: size: 928 GiB free: 726 GiB
    allocated: 202 GiB zfs-fs: size: 992.05 GiB free: 697.25 GiB
  Components: Online:
  1:
Use of uninitialized value $_ in regexp compilation at ./inxi line 24578.
Use of uninitialized value $_ in regexp compilation at ./inxi line 24578.
Use of uninitialized value $_ in regexp compilation at ./inxi line 24578.
Use of uninitialized value $_ in regexp compilation at ./inxi line 24578.
Drives:
  Local Storage: total: raw: 961.24 GiB usable: 2.81 TiB used: 203.86 GiB (7.1%)
  ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: Smart Modular Tech. model: SH32G size: 29.72 GiB
    block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR
  SMART Message: Unknown smartctl error. Unable to generate data.
  ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Apple model: HDD HTS541010A9E662
    size: 931.51 GiB block-size: physical: 4096 B logical: 512 B sata: 2.6 speed: 3.0 Gb/s type: HDD
    rpm: 5400 rev: JA0AB5D0 temp: 29 C scheme: GPT
  SMART: yes state: enabled health: PASSED on: 2y 234d 1h cycles: 2957
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 29.47 GiB size: 28.96 GiB (98.26%) used: 6.2 GiB (21.4%) fs: ext4
    block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: writable
    uuid: a6ba7311-aab8-46ea-aad2-6a42bf57300d
  ID-2: /PIBackup raw-size: N/A size: 697.25 GiB used: 128 KiB (0.0%) fs: zfs logical: PIBackup
  ID-3: /PIBackup/Backup raw-size: N/A size: 801.97 GiB used: 197.52 GiB (24.6%) fs: zfs
    logical: PIBackup/Backup
  ID-4: /boot/firmware raw-size: 256 MiB size: 252 MiB (98.46%) used: 147.5 MiB (58.5%) fs: vfat
    block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: system-boot uuid: B084-2C85
Swap:
  Alert: No swap data was found.
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA
    chip-ID: 2109:3431 class-ID: 0900
  Device-1: 1-1.3:3 info: Nam Tai E&E Products or OmniVision SCEH-0036 type: 
    driver: dvb_usb_dib0700 interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: 1415:0003
    class-ID: 0000 Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003
    class-ID: 0900
  Device-1: 2-2:2 info: ASMedia ASM1153 SATA 3Gb/s bridge type: Mass Storage driver: usb-storage
    interfaces: 1 rev: 3.0 speed: 5 Gb/s chip-ID: 174c:1153 class-ID: 0806 Hub-4: 3-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
Sensors:
  Missing: Required tool sensors not installed. Check --recommends
Repos:
  Packages: 760 apt: 756 lib: 324 snap: 4
  Active apt repos in: /etc/apt/sources.list
    1: deb http: //ports.ubuntu.com/ubuntu-ports jammy main restricted
    2: deb http: //ports.ubuntu.com/ubuntu-ports jammy-updates main restricted
    3: deb http: //ports.ubuntu.com/ubuntu-ports jammy universe
    4: deb http: //ports.ubuntu.com/ubuntu-ports jammy-updates universe
    5: deb http: //ports.ubuntu.com/ubuntu-ports jammy multiverse
    6: deb http: //ports.ubuntu.com/ubuntu-ports jammy-updates multiverse
    7: deb http: //ports.ubuntu.com/ubuntu-ports jammy-backports main restricted universe multiverse
    8: deb http: //ports.ubuntu.com/ubuntu-ports jammy-security main restricted
    9: deb http: //ports.ubuntu.com/ubuntu-ports jammy-security universe
    10: deb http: //ports.ubuntu.com/ubuntu-ports jammy-security multiverse
  Active apt repos in: /etc/apt/sources.list.d/docker.list
    1: deb [arch=arm64 signed-by=/etc/apt/keyrings/docker.gpg] https: //download.docker.com/linux/ubuntu jammy stable
Processes:
  CPU top: 5 of 276
  1: cpu: 42.2% command: hass started by: python3 pid: 2234 mem: 187.1 MiB (4.9%)
  2: cpu: 12.5% command: snapd pid: 1022 mem: 37.8 MiB (0.9%)
  3: cpu: 3.5% command: bash pid: 3031 mem: 3.36 MiB (0.0%)
  4: cpu: 3.1% command: cockpit-tls pid: 2844 mem: 5.14 MiB (0.1%)
  5: cpu: 2.8% command: packagekitd pid: 2942 mem: 20.3 MiB (0.5%)
  Memory top: 5 of 276
  1: mem: 187.1 MiB (4.9%) command: hass started by: python3 pid: 2234 cpu: 42.2%
  2: mem: 73.3 MiB (1.9%) command: dockerd pid: 1223 cpu: 1.2%
  3: mem: 48.5 MiB (1.2%) command: containerd pid: 1136 cpu: 0.5%
  4: mem: 37.8 MiB (0.9%) command: snapd pid: 1022 cpu: 12.5%
  5: mem: 34.2 MiB (0.9%) command: /portainer pid: 1929 cpu: 0.3%
Info:
  Processes: 276 Uptime: 2m Init: systemd v: 249 target: graphical (5) default: graphical
  tool: systemctl Compilers: gcc: N/A Client: shell wrapper v: 5.1.16-release inxi: 3.3.19

Benchmark #61031 - Brand: SanDisk SD High Endurance (SH32G)