Benchmark #6119 - pibenchmarks.com

Brand: SanDisk SD Ultra A1 (JULIE)
A1 C10 U1
#529 / 1,679
17
#1,319 / 1,679
#197 / 394
1,206
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-01-02 04:59:01
#6,119
957
-249 (-26.02%)
Anonymous

Secure Digital (SD) Card Details
SanDisk SD Ultra A1 (JULIE)
A1 C10 U1
29.5G
SD
SanDisk
JULIE
SDHC
5.00
0x03
SD
8.0
09/2018
Class 10
A1
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B+ 1.3
Raspberry Pi 3 Model B Plus Rev 1.3
Raspberry Pi Foundation
1,400
400
1 GB
450 (-50)
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
13 MB/s
21.39 MB/s
22.02 MB/s
735 IOPS
1,772 IOPS
2,941 KB/s
7,088 KB/s
8,450 KB/s
3,427 KB/s
7,113 KB/s
2,767 KB/s

inxi Results
System: Host: rpi Kernel: 4.19.75-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=1280 bcm2708_fb.fbheight=720 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d9b3f436-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: N/A dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 Memory: RAM: total: 1003.7 MiB used: 897.6 MiB (89.4%) gpu: 256.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 4: 1400 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbturbo tty: 80x24 Message: Advanced graphics data unavailable in console for root. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.75-v7+ Network: Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:7 chip ID: 0424:7800 IF: eth0 state: down mac: XX:XX:XX:XX:XX:XX IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac: XX:XX:XX:XX:XX:XX IP v4: 172.17.X.X/16 scope: global broadcast: 172.17.X.X IP v4: 169.254.X.X/16 type: noprefixroute scope: global broadcast: 169.254.X.X IP v6: fe80::cf02:3399:b87c:1fdc/64 scope: link IF-ID-2: hassio state: up speed: N/A duplex: N/A mac: XX:XX:XX:XX:XX:XX IP v4: 172.30.X.X/23 scope: global broadcast: 172.30.X.X IP v4: 169.254.X.X/16 type: noprefixroute scope: global broadcast: 169.254.X.X IP v6: fe80::d898:dbf9:e02:5702/64 scope: link IF-ID-3: veth26a6852 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-4: veth3026375 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-5: veth3cfd07f state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-6: veth98652e8 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-7: vethb4b44aa state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-8: vethb8c883d state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-9: wlan0 state: up mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: noprefixroute scope: global broadcast: 192.168.X.X IP v6: fe80::9882:5705:90ef:4096/64 scope: link WAN IP: 183.83.X.X Drives: Local Storage: total: 29.72 GiB used: 46.39 GiB (156.1%) ID-1: /dev/mmcblk0 model: JULIE size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.47 GiB size: 28.95 GiB (98.24%) used: 23.17 GiB (80.0%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 24eaa08b-10f2-49e0-8283-359f7eb1a0b6 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.8 MiB (20.5%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 69D5-9B27 ID-3: /var/lib/docker/overlay2/0b0a50cc4e82b5d13e0fe8e10483435815e5683389565fa3002cf379197c0e60/merged raw size: N/A size: 28.95 GiB used: 23.17 GiB (80.0%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-4: /var/lib/docker/overlay2/3a24ca19d62b755b3d6b14cc290d1f5019e10678866a99512ef1f1ba5b126958/merged raw size: N/A size: 28.95 GiB used: 23.17 GiB (80.0%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-5: /var/lib/docker/overlay2/7ea0e3a5d9e1f234388349d932994e42ac550c844322328ce71faf83a78a2964/merged raw size: N/A size: 28.95 GiB used: 23.17 GiB (80.0%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-6: /var/lib/docker/overlay2/a28f457aff9498a5abb17f9c990c0d960a3fd3177446df6f818c46f9271fbfda/merged raw size: N/A size: 28.95 GiB used: 23.17 GiB (80.0%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-7: /var/lib/docker/overlay2/df8fd41329306f9c606baad9588652b75b56853c2fb87553fb67d27ff3ad939f/merged raw size: N/A size: 28.95 GiB used: 23.17 GiB (80.0%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-8: /var/lib/docker/overlay2/ec855a5bf2133c454df05c9f9582b0a6b847ec7a791e95a6115e14c3d9545454/merged raw size: N/A size: 28.95 GiB used: 23.17 GiB (80.0%) fs: overlay source: ERR-102 label: N/A uuid: N/A Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Device-1: 1-1.1.1:7 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 Device-2: 1-1.1.2:5 info: Texas Instruments type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 0451:16a8 __0X00124B00194AD7DD Device-3: 1-1.2:4 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c52b Device-4: 1-1.3:6 info: Nordic ASA type: Keyboard,Mouse,HID driver: hid-generic,usbhid interfaces: 3 rev: 1.1 speed: 12 Mb/s chip ID: 1915:1001 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https://download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 36.0% command: hyperiond pid: 539 mem: 14.8 MiB (1.9%) 2: cpu: 19.5% command: kodi.bin_v7 pid: 16450 mem: 175.8 MiB (23.5%) 3: cpu: 7.4% command: certbot started by: python3 pid: 9425 mem: 17.9 MiB (2.3%) 4: cpu: 1.6% command: npm pid: 3147 mem: 16.9 MiB (2.2%) 5: cpu: 1.2% command: appdaemon started by: python3.7 pid: 4726 mem: 18.0 MiB (2.4%) Memory top: 5 1: mem: 175.8 MiB (23.5%) command: kodi.bin_v7 pid: 16450 cpu: 19.5% 2: mem: 56.2 MiB (7.5%) command: python3 pid: 2901 cpu: 0.9% 3: mem: 32.2 MiB (4.3%) command: node pid: 3181 cpu: 0.1% 4: mem: 21.4 MiB (2.8%) command: pm2-runtime started by: node pid: 2977 cpu: 0.4% 5: mem: 20.5 MiB (2.7%) command: python3 pid: 1724 cpu: 0.3% Info: Processes: 199 Uptime: 21h 07m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh (sudo) inxi: 3.0.37

inxi Results

System:
  Host: rpi Kernel: 4.19.75-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
  parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=1280 
  bcm2708_fb.fbheight=720 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 
  vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 
  root=PARTUUID=d9b3f436-02 rootfstype=ext4 elevator=deadline 
  fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles 
  Console: N/A dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:
  Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 
  details: BCM2835 rev: a020d3 
Memory:
  RAM: total: 1003.7 MiB used: 897.6 MiB (89.4%) gpu: 256.0 MiB 
  RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots:
  ARM: No ARM data found for this feature. 
CPU:
  Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 
  type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A 
  bogomips: 358 
  Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 
  3: 1400 4: 1400 
  Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls 
  vfp vfpd32 vfpv3 vfpv4 
  Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:
  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A 
  chip ID: brcm:soc 
  Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
  Display: server: X.org 1.20.4 driver: fbturbo tty: 80x24 
  Message: Advanced graphics data unavailable in console for root. 
Audio:
  Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A 
  chip ID: brcm:soc 
  Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
  Sound Server: ALSA v: k4.19.75-v7+ 
Network:
  Device-1: Standard Microsystems type: USB driver: lan78xx 
  bus ID: 1-1.1.1:7 chip ID: 0424:7800 
  IF: eth0 state: down mac: XX:XX:XX:XX:XX:XX 
  IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac: XX:XX:XX:XX:XX:XX 
  IP v4: 172.17.X.X/16 scope: global broadcast: 172.17.X.X 
  IP v4: 169.254.X.X/16 type: noprefixroute scope: global 
  broadcast: 169.254.X.X 
  IP v6: fe80::cf02:3399:b87c:1fdc/64 scope: link 
  IF-ID-2: hassio state: up speed: N/A duplex: N/A mac: XX:XX:XX:XX:XX:XX 
  IP v4: 172.30.X.X/23 scope: global broadcast: 172.30.X.X 
  IP v4: 169.254.X.X/16 type: noprefixroute scope: global 
  broadcast: 169.254.X.X 
  IP v6: fe80::d898:dbf9:e02:5702/64 scope: link 
  IF-ID-3: veth26a6852 state: up speed: 10000 Mbps duplex: full 
  mac: XX:XX:XX:XX:XX:XX 
  IF-ID-4: veth3026375 state: up speed: 10000 Mbps duplex: full 
  mac: XX:XX:XX:XX:XX:XX 
  IF-ID-5: veth3cfd07f state: up speed: 10000 Mbps duplex: full 
  mac: XX:XX:XX:XX:XX:XX 
  IF-ID-6: veth98652e8 state: up speed: 10000 Mbps duplex: full 
  mac: XX:XX:XX:XX:XX:XX 
  IF-ID-7: vethb4b44aa state: up speed: 10000 Mbps duplex: full 
  mac: XX:XX:XX:XX:XX:XX 
  IF-ID-8: vethb8c883d state: up speed: 10000 Mbps duplex: full 
  mac: XX:XX:XX:XX:XX:XX 
  IF-ID-9: wlan0 state: up mac: XX:XX:XX:XX:XX:XX 
  IP v4: 192.168.X.X/24 type: noprefixroute scope: global 
  broadcast: 192.168.X.X 
  IP v6: fe80::9882:5705:90ef:4096/64 scope: link 
  WAN IP: 183.83.X.X 
Drives:
  Local Storage: total: 29.72 GiB used: 46.39 GiB (156.1%) 
  ID-1: /dev/mmcblk0 model: JULIE size: 29.72 GiB block size: 
  physical: 512 B logical: 512 B scheme: MBR 
  Message: No Optical or Floppy data was found. 
RAID:
  Message: No RAID data was found. 
Partition:
  ID-1: / raw size: 29.47 GiB size: 28.95 GiB (98.24%) 
  used: 23.17 GiB (80.0%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 
  label: rootfs uuid: 24eaa08b-10f2-49e0-8283-359f7eb1a0b6 
  ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
  used: 51.8 MiB (20.5%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 
  label: boot uuid: 69D5-9B27 
  ID-3: /var/lib/docker/overlay2/0b0a50cc4e82b5d13e0fe8e10483435815e5683389565fa3002cf379197c0e60/merged raw size: N/A size: 28.95 GiB used: 23.17 GiB (80.0%) fs: overlay 
  source: ERR-102 label: N/A uuid: N/A 
  ID-4: /var/lib/docker/overlay2/3a24ca19d62b755b3d6b14cc290d1f5019e10678866a99512ef1f1ba5b126958/merged raw size: N/A size: 28.95 GiB used: 23.17 GiB (80.0%) fs: overlay 
  source: ERR-102 label: N/A uuid: N/A 
  ID-5: /var/lib/docker/overlay2/7ea0e3a5d9e1f234388349d932994e42ac550c844322328ce71faf83a78a2964/merged raw size: N/A size: 28.95 GiB used: 23.17 GiB (80.0%) fs: overlay 
  source: ERR-102 label: N/A uuid: N/A 
  ID-6: /var/lib/docker/overlay2/a28f457aff9498a5abb17f9c990c0d960a3fd3177446df6f818c46f9271fbfda/merged raw size: N/A size: 28.95 GiB used: 23.17 GiB (80.0%) fs: overlay 
  source: ERR-102 label: N/A uuid: N/A 
  ID-7: /var/lib/docker/overlay2/df8fd41329306f9c606baad9588652b75b56853c2fb87553fb67d27ff3ad939f/merged raw size: N/A size: 28.95 GiB used: 23.17 GiB (80.0%) fs: overlay 
  source: ERR-102 label: N/A uuid: N/A 
  ID-8: /var/lib/docker/overlay2/ec855a5bf2133c454df05c9f9582b0a6b847ec7a791e95a6115e14c3d9545454/merged raw size: N/A size: 28.95 GiB used: 23.17 GiB (80.0%) fs: overlay 
  source: ERR-102 label: N/A uuid: N/A 
Unmounted:
  Message: No unmounted partitions found. 
USB:
  Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 
  speed: 480 Mb/s chip ID: 1d6b:0002 
  Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 
  speed: 480 Mb/s chip ID: 0424:2514 
  Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 
  speed: 480 Mb/s chip ID: 0424:2514 
  Device-1: 1-1.1.1:7 info: Standard Microsystems type: Network 
  driver: lan78xx interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 
  Device-2: 1-1.1.2:5 info: Texas Instruments 
  type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 
  speed: 12 Mb/s chip ID: 0451:16a8 __0X00124B00194AD7DD 
  Device-3: 1-1.2:4 info: Logitech Unifying Receiver 
  type: Keyboard,Mouse,HID driver: logitech-djreceiver,usbhid interfaces: 3 
  rev: 2.0 speed: 12 Mb/s chip ID: 046d:c52b 
  Device-4: 1-1.3:6 info: Nordic ASA type: Keyboard,Mouse,HID 
  driver: hid-generic,usbhid interfaces: 3 rev: 1.1 speed: 12 Mb/s 
  chip ID: 1915:1001 
Sensors:
  Missing: Required tool sensors not installed. Check --recommends 
Repos:
  Active apt repos in: /etc/apt/sources.list 
  1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
  Active apt repos in: /etc/apt/sources.list.d/docker.list 
  1: deb [arch=armhf] https://download.docker.com/linux/raspbian buster stable
  Active apt repos in: /etc/apt/sources.list.d/raspi.list 
  1: deb http://archive.raspberrypi.org/debian/ buster main
Processes:
  CPU top: 5 
  1: cpu: 36.0% command: hyperiond pid: 539 mem: 14.8 MiB (1.9%) 
  2: cpu: 19.5% command: kodi.bin_v7 pid: 16450 mem: 175.8 MiB (23.5%) 
  3: cpu: 7.4% command: certbot started by: python3 pid: 9425 
  mem: 17.9 MiB (2.3%) 
  4: cpu: 1.6% command: npm pid: 3147 mem: 16.9 MiB (2.2%) 
  5: cpu: 1.2% command: appdaemon started by: python3.7 pid: 4726 
  mem: 18.0 MiB (2.4%) 
  Memory top: 5 
  1: mem: 175.8 MiB (23.5%) command: kodi.bin_v7 pid: 16450 cpu: 19.5% 
  2: mem: 56.2 MiB (7.5%) command: python3 pid: 2901 cpu: 0.9% 
  3: mem: 32.2 MiB (4.3%) command: node pid: 3181 cpu: 0.1% 
  4: mem: 21.4 MiB (2.8%) command: pm2-runtime started by: node pid: 2977 
  cpu: 0.4% 
  5: mem: 20.5 MiB (2.7%) command: python3 pid: 1724 cpu: 0.3% 
Info:
  Processes: 199 Uptime: 21h 07m Init: systemd v: 241 runlevel: 5 
  target: graphical.target Compilers: gcc: 8.3.0 alt: 8 
  Shell: Storage.sh (sudo) inxi: 3.0.37

Benchmark #6119 - Brand: SanDisk SD Ultra A1 (JULIE)