Benchmark #61487 - pibenchmarks.com

Brand: Samsung SD Pro Endurance (JB1RT)
C10 U1
#124 / 1,539
87
#1,188 / 1,539
#180 / 369
1,155
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2022-07-29 06:13:34
#61,487
1,303
+148 (+11.36%)
Flashbin
Samsung Pro Endurance 32GB on Pi 4

Secure Digital (SD) Card Details
Samsung SD Pro Endurance (JB1RT)
C10 U1
29.5G
SD
Samsung
JB1RT
SD
6.00
0x1b
SM
3.0
11/2020
Class 10
None
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
N/A
4
1,500
500
2 GB
1,600
42 (-9)

Operating System

Debian GNU/Linux 10 (buster)
aarch64

Benchmark Results
24.5 MB/s
43.22 MB/s
42.79 MB/s
366 IOPS
3,521 IOPS
1,466 KB/s
14,087 KB/s
11,803 KB/s
3,891 KB/s
12,241 KB/s
2,337 KB/s

inxi Results
System: Kernel: 5.10.0-0.bpo.12-arm64 arch: aarch64 bits: 64 compiler: gcc v: 8.3.0 parameters: dma.dmachans=0x37f5 bcm2709.boardrev=0xb03114 bcm2709.serial=0xa36470ba bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty0 console=ttyS1,115200 root=/dev/mmcblk1p2 rw fsck.repair=yes net.ifnames=0 rootwait Console: pty pts/0 Distro: Debian GNU/Linux 10 (buster) Machine: Type: ARM System: Raspberry Pi 4 Model B Rev 1.4 details: N/A Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 1.8 GiB used: 374 MiB (20.3%) RAM Report: no-data: dmidecode is not allowed to read /dev/mem PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 Topology: cpus: 1x cores: 4 smt: cache: N/A Speed (MHz): avg: 825 high: 1200 min/max: 600/1500 scaling: driver: cpufreq-dt governor: schedutil cores: 1: 1200 2: 900 3: 600 4: 600 bogomips: 432 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: unspecified server: N/A driver: N/A note: X driver n/a tty: 80x40 Message: Unable to show GL data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Sound Server-1: ALSA v: k5.10.0-0.bpo.12-arm64 running: yes Network: Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: scope: global broadcast: IP v6: scope: global IP v6: scope: link Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq IF-ID-1: wlan0 state: down mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: hardware: no software: no address: see --recommends Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial Report: This feature requires one of these tools: hciconfig/bt-adapter Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 29.81 GiB used: 1.85 GiB (6.2%) ID-1: /dev/mmcblk1 maj-min: 179:0 model: JB1RT size: 29.81 GiB block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. Message: No optical or floppy data found. Partition: ID-1: / raw-size: 29.52 GiB size: 29.05 GiB (98.42%) used: 1.73 GiB (5.9%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk1p2 maj-min: 179:2 label: RASPIROOT uuid: 3afa1322-78ce-432e-8cf6-85c7c878a596 ID-2: /boot/firmware raw-size: 299 MiB size: 298.8 MiB (99.94%) used: 124.9 MiB (41.8%) fs: vfat block-size: 512 B dev: /dev/mmcblk1p1 maj-min: 179:1 label: RASPIFIRM uuid: 1E48-B72B Swap: Alert: No swap data was found. Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 410 lib: 220 Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian buster main contrib non-free 2: deb http: //deb.debian.org/debian-security buster/updates main contrib non-free 3: deb http: //deb.debian.org/debian/ buster-backports main contrib non-free Processes: CPU top: 5 of 126 1: cpu: 0.3% command: sshd: pid: 24060 mem: 4.49 MiB (0.2%) 2: cpu: 0.3% command: [kworker/u8:0-events_unbound] pid: 24062 mem: 0.00 MiB (0.0%) 3: cpu: 0.2% command: pihole-ftl pid: 15918 mem: 13.0 MiB (0.7%) 4: cpu: 0.2% command: -bash pid: 24061 mem: 3.93 MiB (0.2%) 5: cpu: 0.1% command: prometheus-node-exporter pid: 431 mem: 28.7 MiB (1.5%) Memory top: 5 of 126 1: mem: 28.7 MiB (1.5%) command: prometheus-node-exporter pid: 431 cpu: 0.1% 2: mem: 21.6 MiB (1.1%) command: php-cgi pid: 8004 cpu: 0.0% 3: mem: 16.2 MiB (0.8%) command: php-cgi pid: 8018 cpu: 0.0% 4: mem: 15.8 MiB (0.8%) command: php-cgi pid: 8020 cpu: 0.0% 5: mem: 15.7 MiB (0.8%) command: php-cgi pid: 8021 cpu: 0.0% Info: Processes: 126 Uptime: 34d 23h 36m Init: systemd v: 241 target: graphical (5) default: graphical tool: systemctl Compilers: gcc: N/A Client: shell wrapper v: 5.0.3-release inxi: 3.3.20

inxi Results

System:
  Kernel: 5.10.0-0.bpo.12-arm64 arch: aarch64 bits: 64 compiler: gcc v: 8.3.0 parameters:
    dma.dmachans=0x37f5 bcm2709.boardrev=0xb03114 bcm2709.serial=0xa36470ba
    bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0
    smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000
    console=tty0 console=ttyS1,115200 root=/dev/mmcblk1p2 rw fsck.repair=yes net.ifnames=0
    rootwait
  Console: pty pts/0 Distro: Debian GNU/Linux 10 (buster)
Machine:
  Type: ARM System: Raspberry Pi 4 Model B Rev 1.4 details: N/A Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 1.8 GiB used: 374 MiB (20.3%)
  RAM Report: no-data: dmidecode is not allowed to read /dev/mem
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0
    stepping: 3
  Topology: cpus: 1x cores: 4 smt:  cache: N/A
  Speed (MHz): avg: 825 high: 1200 min/max: 600/1500 scaling: driver: cpufreq-dt
    governor: schedutil cores: 1: 1200 2: 900 3: 600 4: 600 bogomips: 432
  Features: asimd cpuid crc32 evtstrm fp
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 status: Vulnerable
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700
    class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700
    class-ID: hdmi
  Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu
  Display: unspecified server: N/A driver: N/A note:  X driver n/a tty: 80x40
  Message: Unable to show GL data. Required tool glxinfo missing.
Audio:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi
  Sound Server-1: ALSA v: k5.10.0-0.bpo.12-arm64 running: yes
Network:
  Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000
    class-ID: ethernet
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 
  IP v4:  scope: global broadcast: 
  IP v6:  scope: global
  IP v6:  scope: link
  Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A
    chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq
  IF-ID-1: wlan0 state: down mac: 
  WAN IP: 
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
  Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: hardware: no
    software: no address: see --recommends
  Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial
  Report: This feature requires one of these tools: hciconfig/bt-adapter
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 29.81 GiB used: 1.85 GiB (6.2%)
  ID-1: /dev/mmcblk1 maj-min: 179:0 model: JB1RT size: 29.81 GiB block-size: physical: 512 B
    logical: 512 B type: SSD scheme: MBR
  SMART Message: Unknown smartctl error. Unable to generate data.
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 29.52 GiB size: 29.05 GiB (98.42%) used: 1.73 GiB (5.9%) fs: ext4
    block-size: 4096 B dev: /dev/mmcblk1p2 maj-min: 179:2 label: RASPIROOT
    uuid: 3afa1322-78ce-432e-8cf6-85c7c878a596
  ID-2: /boot/firmware raw-size: 299 MiB size: 298.8 MiB (99.94%) used: 124.9 MiB (41.8%)
    fs: vfat block-size: 512 B dev: /dev/mmcblk1p1 maj-min: 179:1 label: RASPIFIRM uuid: 1E48-B72B
Swap:
  Alert: No swap data was found.
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA
    chip-ID: 2109:3431 class-ID: 0900
  Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003
    class-ID: 0900
Sensors:
  Missing: Required tool sensors not installed. Check --recommends
Repos:
  Packages: apt: 410 lib: 220
  Active apt repos in: /etc/apt/sources.list
    1: deb http: //deb.debian.org/debian buster main contrib non-free
    2: deb http: //deb.debian.org/debian-security buster/updates main contrib non-free
    3: deb http: //deb.debian.org/debian/ buster-backports main contrib non-free
Processes:
  CPU top: 5 of 126
  1: cpu: 0.3% command: sshd: pid: 24060 mem: 4.49 MiB (0.2%)
  2: cpu: 0.3% command: [kworker/u8:0-events_unbound] pid: 24062 mem: 0.00 MiB (0.0%)
  3: cpu: 0.2% command: pihole-ftl pid: 15918 mem: 13.0 MiB (0.7%)
  4: cpu: 0.2% command: -bash pid: 24061 mem: 3.93 MiB (0.2%)
  5: cpu: 0.1% command: prometheus-node-exporter pid: 431 mem: 28.7 MiB (1.5%)
  Memory top: 5 of 126
  1: mem: 28.7 MiB (1.5%) command: prometheus-node-exporter pid: 431 cpu: 0.1%
  2: mem: 21.6 MiB (1.1%) command: php-cgi pid: 8004 cpu: 0.0%
  3: mem: 16.2 MiB (0.8%) command: php-cgi pid: 8018 cpu: 0.0%
  4: mem: 15.8 MiB (0.8%) command: php-cgi pid: 8020 cpu: 0.0%
  5: mem: 15.7 MiB (0.8%) command: php-cgi pid: 8021 cpu: 0.0%
Info:
  Processes: 126 Uptime: 34d 23h 36m Init: systemd v: 241 target: graphical (5) default: graphical
  tool: systemctl Compilers: gcc: N/A Client: shell wrapper v: 5.0.3-release inxi: 3.3.20

Benchmark #61487 - Brand: Samsung SD Pro Endurance (JB1RT)