Benchmark #61755 - pibenchmarks.com

Brand: SanDisk SD Extreme A1 (SC128)
A1 C10 U1
#52 / 1,539
204
#1,115 / 1,539
#119 / 369
1,285
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2022-08-06 21:40:25
#61,755
1,190
-95 (-7.98%)
Anonymous
Sandisk Ultra MicroSD 64GB on Pi 3B

Secure Digital (SD) Card Details
SanDisk SD Extreme A1 (SC128)
A1 C10 U1
118.8G
SD
SanDisk
SC128
SDXC
5.00
0x03
SD
8.0
04/2018
Class 10
A1
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B 1.2
Raspberry Pi 3 Model B Rev 1.2
Raspberry Pi Foundation
ARMv7 v7l
4
1,200
400
1 GB
450
100 (+50)

Operating System

Raspbian GNU/Linux 11 (bullseye)
armv7l

Benchmark Results
21.1 MB/s
35.23 MB/s
36.6 MB/s
836 IOPS
2,901 IOPS
3,345 KB/s
11,606 KB/s
9,020 KB/s
3,095 KB/s
9,034 KB/s
2,929 KB/s

inxi Results
System: Kernel: 5.15.32-v7+ arch: armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=Composite-1:720x480@60i vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty1 root=PARTUUID=5579c5e3-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 1 Distro: Raspbian GNU/Linux 11 (bullseye) Machine: Type: ARM System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 988.7 MiB used: 171.8 MiB (17.4%) gpu: 16 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 4 Topology: cpus: 1x cores: 4 smt: N/A cache: N/A Speed (MHz): avg: 1200 min/max: 600/1200 scaling: driver: cpufreq-dt governor: ondemand cores: 1: 1200 2: 1200 3: 1200 4: 1200 bogomips: 307 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Not affected Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Not affected Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2835-hdmi driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:3f902000 class-ID: hdmi Device-2: bcm2835-vc4 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: gpu Display: server: X.org v: 1.20.11 with: Xwayland driver: X: loaded: modesetting gpu: vc4_hdmi,vc4_drm tty: 80x40 Message: Unable to show GL data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:3f902000 class-ID: hdmi Device-2: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Sound Server-1: ALSA v: k5.15.32-v7+ running: yes Sound Server-2: JACK v: 1.9.17 running: no Sound Server-3: PulseAudio v: 14.2 running: yes Sound Server-4: PipeWire v: 0.3.19 running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:3f300000 class-ID: mmcnr IF: wlan0 state: down mac: Device-2: Microchip (formerly SMSC) SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus-ID: 1-1.1:3 chip-ID: 0424:ec00 class-ID: ff00 IF: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:3f201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: bt-v: 2.1 lmp-v: 4.1 sub-v: 2209 hci-v: 4.1 rev: 1fc Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept service-classes: rendering, capturing, audio Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 119.08 GiB used: 8.6 GiB (7.2%) ID-1: /dev/mmcblk0 maj-min: 179:0 model: SC128 size: 119.08 GiB block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. Message: No optical or floppy data found. Partition: ID-1: / raw-size: 118.83 GiB size: 116.92 GiB (98.39%) used: 8.55 GiB (7.3%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs uuid: a755e991-ee07-4251-9a93-ddbb10695d94 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 49.2 MiB (19.5%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: 7C7A-DCF2 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: Microchip (formerly SMSC) SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 0424:9514 class-ID: 0900 Device-1: 1-1.1:3 info: Microchip (formerly SMSC) SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 0424:ec00 class-ID: ff00 Device-2: 1-1.5:4 info: MOSART Semi. 2.4G RF Keyboard & Mouse type: Keyboard,Mouse driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s power: 100mA chip-ID: 3938:1032 class-ID: 0301 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 2024 lib: 1022 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ bullseye main Processes: CPU top: 5 of 134 1: cpu: 1.1% command: [kworker/2:2-events_power_efficient] pid: 2530 mem: 0.00 MiB (0.0%) 2: cpu: 0.9% command: [kworker/0:0-events] pid: 2396 mem: 0.00 MiB (0.0%) 3: cpu: 0.7% command: init pid: 1 mem: 8.62 MiB (0.8%) 4: cpu: 0.3% command: smartd pid: 3353 mem: 3.64 MiB (0.3%) 5: cpu: 0.2% command: packagekitd pid: 2704 mem: 15.5 MiB (1.5%) Memory top: 5 of 134 1: mem: 15.5 MiB (1.5%) command: packagekitd pid: 2704 cpu: 0.2% 2: mem: 13.3 MiB (1.3%) command: systemd-journald pid: 126 cpu: 0.0% 3: mem: 9.25 MiB (0.9%) command: pulseaudio pid: 709 cpu: 0.0% 4: mem: 8.62 MiB (0.8%) command: init pid: 1 cpu: 0.7% 5: mem: 8.46 MiB (0.8%) command: modemmanager pid: 494 cpu: 0.0% Info: Processes: 134 Uptime: 21m Init: systemd v: 247 target: multi-user (3) default: multi-user tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.20

inxi Results

System:
  Kernel: 5.15.32-v7+ arch: armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M
    8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1
    video=Composite-1:720x480@60i vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000
    console=ttyS0,115200 console=tty1 root=PARTUUID=5579c5e3-02 rootfstype=ext4 fsck.repair=yes
    rootwait quiet splash plymouth.ignore-serial-consoles
  Console: tty 1 Distro: Raspbian GNU/Linux 11 (bullseye)
Machine:
  Type: ARM System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 988.7 MiB used: 171.8 MiB (17.4%) gpu: 16 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: 0
    stepping: 4
  Topology: cpus: 1x cores: 4 smt: N/A cache: N/A
  Speed (MHz): avg: 1200 min/max: 600/1200 scaling: driver: cpufreq-dt governor: ondemand cores:
    1: 1200 2: 1200 3: 1200 4: 1200 bogomips: 307
  Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3
    vfpv4
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: spec_store_bypass status: Not affected
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 status: Not affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2835-hdmi driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:3f902000 class-ID: hdmi
  Device-2: bcm2835-vc4 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: gpu
  Display: server: X.org v: 1.20.11 with: Xwayland driver: X: loaded: modesetting
    gpu: vc4_hdmi,vc4_drm tty: 80x40
  Message: Unable to show GL data. Required tool glxinfo missing.
Audio:
  Device-1: bcm2835-hdmi driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:3f902000 class-ID: hdmi
  Device-2: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio
    class-ID: bcm2835_audio
  Sound Server-1: ALSA v: k5.15.32-v7+ running: yes
  Sound Server-2: JACK v: 1.9.17 running: no
  Sound Server-3: PulseAudio v: 14.2 running: yes
  Sound Server-4: PipeWire v: 0.3.19 running: yes
Network:
  Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:3f300000
    class-ID: mmcnr
  IF: wlan0 state: down mac: 
  Device-2: Microchip (formerly SMSC) SMSC9512/9514 Fast Ethernet Adapter type: USB
    driver: smsc95xx bus-ID: 1-1.1:3 chip-ID: 0424:ec00 class-ID: ff00
  IF: eth0 state: up speed: 100 Mbps duplex: full mac: 
  IP v4:  type: dynamic noprefixroute scope: global broadcast: 
  IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global
  IP v6:  scope: link
  WAN IP: 
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:3f201000 class-ID: serial
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address:  bt-v: 2.1 lmp-v: 4.1
    sub-v: 2209 hci-v: 4.1 rev: 1fc
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept
    service-classes: rendering, capturing, audio
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 119.08 GiB used: 8.6 GiB (7.2%)
  ID-1: /dev/mmcblk0 maj-min: 179:0 model: SC128 size: 119.08 GiB block-size: physical: 512 B
    logical: 512 B type: SSD scheme: MBR
  SMART Message: Unknown smartctl error. Unable to generate data.
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 118.83 GiB size: 116.92 GiB (98.39%) used: 8.55 GiB (7.3%) fs: ext4
    block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs
    uuid: a755e991-ee07-4251-9a93-ddbb10695d94
  ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 49.2 MiB (19.5%) fs: vfat
    block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: 7C7A-DCF2
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: Microchip (formerly SMSC) SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s
    power: 2mA chip-ID: 0424:9514 class-ID: 0900
  Device-1: 1-1.1:3 info: Microchip (formerly SMSC) SMSC9512/9514 Fast Ethernet Adapter
    type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 2mA
    chip-ID: 0424:ec00 class-ID: ff00
  Device-2: 1-1.5:4 info: MOSART Semi. 2.4G RF Keyboard & Mouse type: Keyboard,Mouse
    driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s power: 100mA chip-ID: 3938:1032
    class-ID: 0301
Sensors:
  Missing: Required tool sensors not installed. Check --recommends
Repos:
  Packages: apt: 2024 lib: 1022
  Active apt repos in: /etc/apt/sources.list
    1: deb http: //raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-free rpi
  Active apt repos in: /etc/apt/sources.list.d/raspi.list
    1: deb http: //archive.raspberrypi.org/debian/ bullseye main
Processes:
  CPU top: 5 of 134
  1: cpu: 1.1% command: [kworker/2:2-events_power_efficient] pid: 2530 mem: 0.00 MiB (0.0%)
  2: cpu: 0.9% command: [kworker/0:0-events] pid: 2396 mem: 0.00 MiB (0.0%)
  3: cpu: 0.7% command: init pid: 1 mem: 8.62 MiB (0.8%)
  4: cpu: 0.3% command: smartd pid: 3353 mem: 3.64 MiB (0.3%)
  5: cpu: 0.2% command: packagekitd pid: 2704 mem: 15.5 MiB (1.5%)
  Memory top: 5 of 134
  1: mem: 15.5 MiB (1.5%) command: packagekitd pid: 2704 cpu: 0.2%
  2: mem: 13.3 MiB (1.3%) command: systemd-journald pid: 126 cpu: 0.0%
  3: mem: 9.25 MiB (0.9%) command: pulseaudio pid: 709 cpu: 0.0%
  4: mem: 8.62 MiB (0.8%) command: init pid: 1 cpu: 0.7%
  5: mem: 8.46 MiB (0.8%) command: modemmanager pid: 494 cpu: 0.0%
Info:
  Processes: 134 Uptime: 21m Init: systemd v: 247 target: multi-user (3) default: multi-user
  tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release
  inxi: 3.3.20

Benchmark #61755 - Brand: SanDisk SD Extreme A1 (SC128)