Benchmark #6193 - pibenchmarks.com

Brand: SanDisk U100
SSD (2.5" SATA)
#354 / 1,675
33
#1,083 / 1,675
#956 / 984
#350 / 370
2,069
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.de Amazon.fr Amazon.it

Overview
2020-01-03 09:29:40
#6,193
1,368
-701 (-51.24%)
Anonymous
SanDisk on Pi Zero no name Sata to Usb

Storage Details
SanDisk U100
SSD (2.5" SATA)
16G
SSD
SanDisk
SSDU10016GB
1.8 inch
SATA
14cd:6116
0x14cd (Super Top)
0x6116
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi Zero W 1.1
Raspberry Pi Zero W Rev 1.1
Raspberry Pi Foundation
1,000
400
450

Operating System

Raspbian GNU/Linux 8 (jessie)
armv6l

Benchmark Results
27.7 MB/s
29.92 MB/s
30.65 MB/s
941 IOPS
1,617 IOPS
3,766 KB/s
6,469 KB/s
8,132 KB/s
4,522 KB/s
5,957 KB/s
5,683 KB/s

inxi Results
System: Host: PiZeroW-1 Kernel: 4.9.35+ armv6l bits: 32 compiler: gcc v: 4.9.3 parameters: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/sda1 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 8 (jessie) Machine: Type: ARM Device System: Raspberry Pi Zero W Rev 1.1 details: BCM2835 rev: 9000c1 Memory: RAM: total: 498.1 MiB used: 164.7 MiB (33.1%) gpu: 64.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Single Core model: ARMv6-compatible v6l bits: 32 type: UP arch: v6l family: 7 model-id: N/A stepping: 7 microcode: N/A bogomips: 997 Speed: 1000 MHz min/max: 700/1000 MHz Core speed (MHz): 1: 1000 Features: edsp fastmult half java thumb tls vfp Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 93x33 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_AUD0 bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.9.35+ Network: Message: No ARM data found for this feature. IF-ID-1: wlan0 state: up mac: IP v4: scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 16.78 GiB used: 1.28 GiB (7.6%) ID-1: /dev/mmcblk0 model: 00000 size: 1.87 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB model: Mass Storage Device size: 14.91 GiB block size: physical: 512 B logical: 512 B scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 11.91 GiB size: 11.66 GiB (97.91%) used: 1.26 GiB (10.8%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A uuid: 4ffb2ad4-ac48-4da9-a21d-b870f1bf3081 ID-2: /boot raw size: 41.7 MiB size: 41.0 MiB (98.43%) used: 20.9 MiB (51.0%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 109A-9113 Unmounted: ID-1: /dev/mmcblk0p2 size: 1.82 GiB fs: ext4 label: N/A uuid: 673b8ab6-6426-474b-87d3-71bff0fcebc3 ID-2: /dev/sda2 size: 1 KiB fs: N/A label: N/A uuid: N/A USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Device-1: 1-1:2 info: Super Top M6116 SATA Bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 14cd:6116 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //mirrordirector.raspbian.org/raspbian/ jessie main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/mosquitto-jessie.list 1: deb https: //repo.mosquitto.org/debian jessie main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ jessie main ui Processes: CPU top: 5 1: cpu: 7.8% command: [w1_bus_master1] pid: 157 mem: 0.00 MiB (0.0%) 2: cpu: 1.1% command: node-red pid: 377 mem: 72.7 MiB (16.7%) 3: cpu: 0.2% command: init pid: 1 mem: 3.73 MiB (0.8%) 4: cpu: 0.2% command: [kworker/u2:1] pid: 981 mem: 0.00 MiB (0.0%) 5: cpu: 0.2% command: sed pid: 4127 mem: 1.83 MiB (0.4%) Memory top: 5 1: mem: 72.7 MiB (16.7%) command: node-red pid: 377 cpu: 1.1% 2: mem: 5.36 MiB (1.2%) command: python pid: 750 cpu: 0.0% 3: mem: 4.78 MiB (1.1%) command: sshd: pid: 755 cpu: 0.0% 4: mem: 4.14 MiB (0.9%) command: sshd pid: 718 cpu: 0.0% 5: mem: 4.12 MiB (0.9%) command: -bash pid: 763 cpu: 0.0% Info: Processes: 107 Uptime: 1h 12m Init: systemd v: 215 runlevel: 3 target: multi-user.target Compilers: gcc: 4.9.2 alt: 4.9 Client: shell wrapper v: 4.3.30-release inxi: 3.0.37

inxi Results

System:    Host: PiZeroW-1 Kernel: 4.9.35+ armv6l bits: 32 compiler: gcc v: 4.9.3 
           parameters: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 
           bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x1ec00000 
           vc_mem.mem_size=0x20000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 
           root=/dev/sda1 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 8 (jessie) 
Machine:   Type: ARM Device System: Raspberry Pi Zero W Rev 1.1 details: BCM2835 rev: 9000c1 
           Memory:    RAM: total: 498.1 MiB used: 164.7 MiB (33.1%) gpu: 64.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Single Core model: ARMv6-compatible v6l bits: 32 type: UP arch: v6l family: 7 
           model-id: N/A stepping: 7 microcode: N/A bogomips: 997 
           Speed: 1000 MHz min/max: 700/1000 MHz Core speed (MHz): 1: 1000 
           Features: edsp fastmult half java thumb tls vfp 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 93x33 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_AUD0 bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.9.35+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: wlan0 state: up mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 16.78 GiB used: 1.28 GiB (7.6%) 
           ID-1: /dev/mmcblk0 model: 00000 size: 1.87 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB model: Mass Storage Device size: 14.91 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 11.91 GiB size: 11.66 GiB (97.91%) used: 1.26 GiB (10.8%) fs: ext4 
           block size: 4096 B dev: /dev/sda1 label: N/A uuid: 4ffb2ad4-ac48-4da9-a21d-b870f1bf3081 
           ID-2: /boot raw size: 41.7 MiB size: 41.0 MiB (98.43%) used: 20.9 MiB (51.0%) fs: vfat 
           block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 109A-9113 
Unmounted: ID-1: /dev/mmcblk0p2 size: 1.82 GiB fs: ext4 label: N/A 
           uuid: 673b8ab6-6426-474b-87d3-71bff0fcebc3 
           ID-2: /dev/sda2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Device-1: 1-1:2 info: Super Top M6116 SATA Bridge type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 14cd:6116 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //mirrordirector.raspbian.org/raspbian/ jessie main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/mosquitto-jessie.list 
           1: deb https: //repo.mosquitto.org/debian jessie main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ jessie main ui
Processes: CPU top: 5 
           1: cpu: 7.8% command: [w1_bus_master1] pid: 157 mem: 0.00 MiB (0.0%) 
           2: cpu: 1.1% command: node-red pid: 377 mem: 72.7 MiB (16.7%) 
           3: cpu: 0.2% command: init pid: 1 mem: 3.73 MiB (0.8%) 
           4: cpu: 0.2% command: [kworker/u2:1] pid: 981 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.2% command: sed pid: 4127 mem: 1.83 MiB (0.4%) 
           Memory top: 5 
           1: mem: 72.7 MiB (16.7%) command: node-red pid: 377 cpu: 1.1% 
           2: mem: 5.36 MiB (1.2%) command: python pid: 750 cpu: 0.0% 
           3: mem: 4.78 MiB (1.1%) command: sshd: pid: 755 cpu: 0.0% 
           4: mem: 4.14 MiB (0.9%) command: sshd pid: 718 cpu: 0.0% 
           5: mem: 4.12 MiB (0.9%) command: -bash pid: 763 cpu: 0.0% 
Info:      Processes: 107 Uptime: 1h 12m Init: systemd v: 215 runlevel: 3 
           target: multi-user.target Compilers: gcc: 4.9.2 alt: 4.9 Client: shell wrapper 
           v: 4.3.30-release inxi: 3.0.37

Benchmark #6193 - Brand: SanDisk U100