Benchmark #62025 - pibenchmarks.com

Brand: Samsung SD EVO+ (EC1S5)
A1 C10 V10 U1
#90 / 1,679
194
#1,252 / 1,679
#139 / 394
1,322
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2022-08-17 13:20:49
#62,025
1,344
+22 (+1.64%)
db

Secure Digital (SD) Card Details
Samsung SD EVO+ (EC1S5)
A1 C10 V10 U1
59.4G
SD
Samsung
EC1S5
SD
6.00
0x1b
SM
3.0
02/2021
Class 10
A1
U1
V10

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
N/A
4
1,500
500
8 GB
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
aarch64

Benchmark Results
24 MB/s
42.25 MB/s
40.51 MB/s
747 IOPS
3,843 IOPS
2,989 KB/s
15,372 KB/s
13,447 KB/s
2,681 KB/s
11,192 KB/s
2,609 KB/s

inxi Results
System: Host: auxpi1 Kernel: 5.10.103-v8+ arch: aarch64 bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=f879eb63-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait cgroup_memory=1 cgroup_enable=memory ip=192.168.X.X::192.168.X.X:255.255.X.X:auxpi1:eth0:off Console: pty pts/0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2835 rev: d03114 Memory: RAM: total: 7.7 GiB used: 2.78 GiB (36.0%) gpu: 76 MiB RAM Report: no-data: dmidecode is not allowed to read /dev/mem PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 Topology: cpus: 1x cores: 4 smt: N/A cache: N/A Speed (MHz): avg: 1500 min/max: 600/1500 scaling: driver: cpufreq-dt governor: ondemand cores: 1: 1500 2: 1500 3: 1500 4: 1500 bogomips: 432 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: No display server data found. Headless machine? tty: 130x28 Message: Unable to show GL data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.103-v8+ running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: down mac: XX:XX:XX:XX:XX:XX Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 scope: global broadcast: 192.168.X.X IP v6: fe80::dea6:32ff:fecd:8836/64 scope: link IF-ID-1: cni0 state: up speed: 10000 Mbps duplex: unknown mac: XX:XX:XX:XX:XX:XX IP v4: 10.42.X.X/24 scope: global broadcast: 10.42.X.X IP v6: fe80::2095:2dff:fe86:33c9/64 scope: link IF-ID-2: flannel.1 state: unknown speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX Message: Output throttled. IPs: 2! Limit: 10! Override: --limit [1-x!-1 all] IF-ID-3: veth00f97046 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-4: veth0edd1276 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-5: veth156f26c2 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-6: veth252147a1 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-7: veth28897b5d state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-8: veth39e1b1c6 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-9: veth5f33e860 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-10: veth603e503f state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-11: veth63d387c5 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-12: veth73d6b8b7 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-13: veth84866acc state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-14: veth8638cd4a state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-15: veth970e3d88 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-16: veth9ac93342 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-17: vethcbfdbdcf state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-18: vethcd79010a state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-19: vethd4c6cde7 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-20: vethd6bfe4c8 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-21: vethd9c9cfe8 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-22: vethe623cf04 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-23: vethf4714608 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-24: vethf83305ff state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-25: vethfcd1a214 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX WAN IP: 50.35.X.X Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: XX:XX:XX:XX:XX:XX bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 179.24 GiB used: 23.89 GiB (13.3%) ID-1: /dev/mmcblk0 maj-min: 179:0 model: EC1S5 size: 59.69 GiB block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/sda maj-min: 8:0 model: VIRTUAL-DISK size: 50 MiB block-size: physical: 512 B logical: 512 B type: N/A N/A rev: 0001 SMART: yes state: disabled ID-3: /dev/sdb maj-min: 8:16 type: USB vendor: Samsung model: Flash Drive FIT size: 119.51 GiB block-size: physical: 512 B logical: 512 B type: SSD rev: 1100 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No optical or floppy data found. Partition: ID-1: / raw-size: 59.43 GiB size: 58.47 GiB (98.38%) used: 23.68 GiB (40.5%) fs: ext4 block-size: 512 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs uuid: 7295bbc3-bbc2-4267-9fa0-099e10ef5bf0 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.2 MiB (19.1%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: 5DE4-665C ID-3: /media/usb raw-size: 119.51 GiB size: 117.13 GiB (98.01%) used: 168.1 MiB (0.1%) fs: ext4 block-size: 512 B dev: /dev/sdb1 maj-min: 8:17 label: N/A uuid: 58656587-98dd-44f5-ade7-439b2197f732 ID-4: /var/lib/kubelet/pods/56e1f177-892f-47b1-be11-341560637d1f/volumes/kubernetes.io~nfs/pvc-3b9fd844-9527-413a-8fda-cc7925c68a35 raw-size: N/A size: 15.71 TiB used: 12.08 TiB (76.9%) fs: nfs4 remote: 192.168.X.X:/volume1/dhramble/provisioner/homeass-home-assistant-config-pvc-3b9fd844-9527-413a-8fda-cc7925c68a35 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 1024 KiB (1.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-2:2 info: Silicon Motion - Taiwan (formerly Feiya ) Flash Drive type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.1 speed: 5 Gb/s power: 304mA chip-ID: 090c:1000 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 557 lib: 284 Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 238 1: cpu: 28.1% command: k3s pid: 24706 mem: 1113.8 MiB (14.2%) 2: cpu: 5.2% command: agent pid: 12483 mem: 119.7 MiB (1.5%) 3: cpu: 3.7% command: agent pid: 13474 mem: 264.7 MiB (3.3%) 4: cpu: 2.3% command: containerd pid: 24742 mem: 86.1 MiB (1.1%) 5: cpu: 1.9% command: longhorn-instance-manager pid: 31390 mem: 22.1 MiB (0.2%) Memory top: 5 of 238 1: mem: 1113.8 MiB (14.2%) command: k3s pid: 24706 cpu: 28.1% 2: mem: 264.7 MiB (3.3%) command: agent pid: 13474 cpu: 3.7% 3: mem: 186.9 MiB (2.3%) command: python3 pid: 7860 cpu: 0.1% 4: mem: 130.1 MiB (1.6%) command: systemd-journald pid: 122 cpu: 0.0% 5: mem: 119.7 MiB (1.5%) command: agent pid: 12483 cpu: 5.2% Info: Processes: 238 Uptime: 69d 23h 42m Init: systemd v: 241 target: graphical (5) default: graphical tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh (sudo) default: Bash v: 5.0.3 running-in: pty pts/0 (SSH) inxi: 3.3.20

inxi Results

System:
  Host: auxpi1 Kernel: 5.10.103-v8+ arch: aarch64 bits: 32 compiler: N/A
    parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0
    snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000
    vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=f879eb63-02
    rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait cgroup_memory=1
    cgroup_enable=memory ip=192.168.X.X::192.168.X.X:255.255.X.X:auxpi1:eth0:off
  Console: pty pts/0 Distro: Raspbian GNU/Linux 10 (buster)
Machine:
  Type: ARM System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2835 rev: d03114
    Memory:
  RAM: total: 7.7 GiB used: 2.78 GiB (36.0%) gpu: 76 MiB
  RAM Report: no-data: dmidecode is not allowed to read /dev/mem
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0
    stepping: 3
  Topology: cpus: 1x cores: 4 smt: N/A cache: N/A
  Speed (MHz): avg: 1500 min/max: 600/1500 scaling: driver: cpufreq-dt governor: ondemand
    cores: 1: 1500 2: 1500 3: 1500 4: 1500 bogomips: 432
  Features: asimd cpuid crc32 evtstrm fp
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 status: Vulnerable
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu
  Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
  Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
  Display: server: No display server data found. Headless machine? tty: 130x28
  Message: Unable to show GL data. Required tool glxinfo missing.
Audio:
  Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio
    class-ID: bcm2835_audio
  Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
  Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
  Sound Server-1: ALSA v: k5.10.103-v8+ running: yes
Network:
  Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000
    class-ID: mmcnr
  IF: wlan0 state: down mac: XX:XX:XX:XX:XX:XX
  Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
    chip-ID: brcm:fd580000 class-ID: ethernet
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IP v4: 192.168.X.X/24 scope: global broadcast: 192.168.X.X
  IP v6: fe80::dea6:32ff:fecd:8836/64 scope: link
  IF-ID-1: cni0 state: up speed: 10000 Mbps duplex: unknown mac: XX:XX:XX:XX:XX:XX
  IP v4: 10.42.X.X/24 scope: global broadcast: 10.42.X.X
  IP v6: fe80::2095:2dff:fe86:33c9/64 scope: link
  IF-ID-2: flannel.1 state: unknown speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  Message: Output throttled. IPs: 2! Limit: 10! Override: --limit [1-x!-1 all]
  IF-ID-3: veth00f97046 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IF-ID-4: veth0edd1276 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IF-ID-5: veth156f26c2 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IF-ID-6: veth252147a1 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IF-ID-7: veth28897b5d state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IF-ID-8: veth39e1b1c6 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IF-ID-9: veth5f33e860 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IF-ID-10: veth603e503f state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IF-ID-11: veth63d387c5 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IF-ID-12: veth73d6b8b7 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IF-ID-13: veth84866acc state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IF-ID-14: veth8638cd4a state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IF-ID-15: veth970e3d88 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IF-ID-16: veth9ac93342 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IF-ID-17: vethcbfdbdcf state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IF-ID-18: vethcd79010a state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IF-ID-19: vethd4c6cde7 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IF-ID-20: vethd6bfe4c8 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IF-ID-21: vethd9c9cfe8 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IF-ID-22: vethe623cf04 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IF-ID-23: vethf4714608 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IF-ID-24: vethf83305ff state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IF-ID-25: vethfcd1a214 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  WAN IP: 50.35.X.X
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address: XX:XX:XX:XX:XX:XX bt-v: 3.0
    lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 179.24 GiB used: 23.89 GiB (13.3%)
  ID-1: /dev/mmcblk0 maj-min: 179:0 model: EC1S5 size: 59.69 GiB block-size: physical: 512 B
    logical: 512 B type: SSD scheme: MBR
  SMART Message: Unknown smartctl error. Unable to generate data.
  ID-2: /dev/sda maj-min: 8:0 model: VIRTUAL-DISK size: 50 MiB block-size: physical: 512 B
    logical: 512 B type: N/A N/A rev: 0001
  SMART: yes state: disabled
  ID-3: /dev/sdb maj-min: 8:16 type: USB vendor: Samsung model: Flash Drive FIT
    size: 119.51 GiB block-size: physical: 512 B logical: 512 B type: SSD     rev: 1100 scheme: MBR
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 59.43 GiB size: 58.47 GiB (98.38%) used: 23.68 GiB (40.5%) fs: ext4
    block-size: 512 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs
    uuid: 7295bbc3-bbc2-4267-9fa0-099e10ef5bf0
  ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.2 MiB (19.1%) fs: vfat
    block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: 5DE4-665C
  ID-3: /media/usb raw-size: 119.51 GiB size: 117.13 GiB (98.01%) used: 168.1 MiB (0.1%)
    fs: ext4 block-size: 512 B dev: /dev/sdb1 maj-min: 8:17 label: N/A
    uuid: 58656587-98dd-44f5-ade7-439b2197f732
  ID-4: /var/lib/kubelet/pods/56e1f177-892f-47b1-be11-341560637d1f/volumes/kubernetes.io~nfs/pvc-3b9fd844-9527-413a-8fda-cc7925c68a35 raw-size: N/A size: 15.71 TiB used: 12.08 TiB (76.9%) fs: nfs4
    remote: 192.168.X.X:/volume1/dhramble/provisioner/homeass-home-assistant-config-pvc-3b9fd844-9527-413a-8fda-cc7925c68a35
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 100 MiB used: 1024 KiB (1.0%) priority: -2 file: /var/swap
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA
    chip-ID: 2109:3431 class-ID: 0900
  Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003
    class-ID: 0900
  Device-1: 2-2:2 info: Silicon Motion - Taiwan (formerly Feiya ) Flash Drive
    type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.1 speed: 5 Gb/s power: 304mA
    chip-ID: 090c:1000 class-ID: 0806 Sensors:
  Missing: Required tool sensors not installed. Check --recommends
Repos:
  Packages: apt: 557 lib: 284
  Active apt repos in: /etc/apt/sources.list
    1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
  Active apt repos in: /etc/apt/sources.list.d/raspi.list
    1: deb http://archive.raspberrypi.org/debian/ buster main
  No active apt repos in: /etc/apt/sources.list.d/vscode.list
Processes:
  CPU top: 5 of 238
  1: cpu: 28.1% command: k3s pid: 24706 mem: 1113.8 MiB (14.2%)
  2: cpu: 5.2% command: agent pid: 12483 mem: 119.7 MiB (1.5%)
  3: cpu: 3.7% command: agent pid: 13474 mem: 264.7 MiB (3.3%)
  4: cpu: 2.3% command: containerd pid: 24742 mem: 86.1 MiB (1.1%)
  5: cpu: 1.9% command: longhorn-instance-manager pid: 31390 mem: 22.1 MiB (0.2%)
  Memory top: 5 of 238
  1: mem: 1113.8 MiB (14.2%) command: k3s pid: 24706 cpu: 28.1%
  2: mem: 264.7 MiB (3.3%) command: agent pid: 13474 cpu: 3.7%
  3: mem: 186.9 MiB (2.3%) command: python3 pid: 7860 cpu: 0.1%
  4: mem: 130.1 MiB (1.6%) command: systemd-journald pid: 122 cpu: 0.0%
  5: mem: 119.7 MiB (1.5%) command: agent pid: 12483 cpu: 5.2%
Info:
  Processes: 238 Uptime: 69d 23h 42m Init: systemd v: 241 target: graphical (5)
  default: graphical tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh (sudo)
  default: Bash v: 5.0.3 running-in: pty pts/0 (SSH) inxi: 3.3.20

Benchmark #62025 - Brand: Samsung SD EVO+ (EC1S5)