Benchmark #62201 - pibenchmarks.com

Brand: Kingston SSDNow V300
SSD (2.5" SATA)
#54 / 1,679
315
#669 / 1,679
#646 / 984
#173 / 370
6,147
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2022-08-25 05:45:06
#62,201
1,667
-4,480 (-268.75%)
DanXCI
4GB class 10 SD card on Pi 2B with 120gb kingston SSD on USB2.0/SATA interface

Storage Details
Kingston SSDNow V300
SSD (2.5" SATA)
120G
SSD
Kingston
SV300S37A120G
SATA
2.00
480
1058:1010
0x1058
0x1010 (USBAT-2 CompactFlash Card Reader)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 2B 1.1
Raspberry Pi 2 Model B Rev 1.1
Raspberry Pi Foundation
ARMv7 v7l
4
900
400 (+150)
1 GB

Operating System

Debian GNU/Linux 10 (buster)
armv7l

Benchmark Results
27 MB/s
26.55 MB/s
26.7 MB/s
1,576 IOPS
1,844 IOPS
6,306 KB/s
7,379 KB/s
7,486 KB/s
5,686 KB/s
7,223 KB/s
7,388 KB/s

inxi Results
System: Host: syncloud Kernel: 5.10.63-v7+ arch: armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyAMA0,115200 console=tty1 root=PARTUUID=43f6ece2-02 rootfstype=ext4 fsck.repair=yes rootwait quiet init=/sbin/init Console: pty pts/1 Distro: Debian GNU/Linux 10 (buster) Machine: Type: ARM System: Raspberry Pi 2 Model B Rev 1.1 details: BCM2835 rev: a21041 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 923.2 MiB used: 195.2 MiB (21.1%) RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: ARMv7 v7l variant: cortex-a7 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 5 Topology: cpus: 1x cores: 4 smt: N/A cache: N/A Speed (MHz): avg: 600 min/max: 600/900 scaling: driver: cpufreq-dt governor: powersave cores: 1: 600 2: 600 3: 600 4: 600 bogomips: N/A Features: edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc class-ID: fb Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: No display server data found. Headless machine? tty: 157x41 Message: Unable to show GL data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.63-v7+ running: yes Network: Device-1: bcm2835-sdhci driver: N/A port: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: mmcnr IF: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic scope: global broadcast: 192.168.X.X IP v6: fe80::ba27:ebff:fe0f:f9f2/64 scope: link Device-2: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus-ID: 1-1.1:3 chip-ID: 0424:ec00 class-ID: ff00 IF: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic scope: global broadcast: 192.168.X.X IP v6: fe80::ba27:ebff:fe0f:f9f2/64 scope: link WAN IP: 220.240.X.X Bluetooth: Message: No bluetooth data found. Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 115.54 GiB used: 1.18 GiB (1.0%) ID-1: /dev/mmcblk0 maj-min: 179:0 model: USD size: 3.75 GiB block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Kingston model: SV300S37A120G family: Driven SSDs size: 111.79 GiB block-size: physical: 512 B logical: 512 B sata: 3.0 speed: 6.0 Gb/s type: SSD rev: 1.75 drive rev: 605ABBF2 temp: 31 C scheme: GPT SMART: yes state: enabled health: PASSED on: 6y 9d 13h cycles: 132 read: 154 GiB written: 7847 GiB Message: No optical or floppy data found. Partition: ID-1: / raw-size: 3.5 GiB size: 3.38 GiB (96.64%) used: 1.12 GiB (33.2%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: N/A uuid: ccbe1f98-54b5-495f-affb-a570a10d0921 ID-2: /opt/disk/external raw-size: 111.79 GiB size: 109.53 GiB (97.98%) used: 61.1 MiB (0.1%) fs: ext4 block-size: 4096 B dev: /dev/sda1 maj-min: 8:1 label: N/A uuid: ff635efc-137f-4344-9223-27a507113181 Swap: Alert: No swap data was found. Unmounted: ID-1: /dev/mmcblk0p1 maj-min: 179:1 size: 256 MiB fs: vfat label: boot uuid: 0213-DFD6 USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 0424:9514 class-ID: 0900 Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 0424:ec00 class-ID: ff00 Device-2: 1-1.3:4 info: Western Digital Elements Portable (WDBAAR) type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 1058:1010 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: 300 pm: dpkg pkgs: 298 libs: 179 tools: apt,apt-get pm: snap pkgs: 2 Active apt repos in: /etc/apt/sources.list 1: deb http://http.debian.net/debian buster main Processes: CPU top: 5 of 142 1: cpu: 1.5% command: top pid: 667 mem: 2.44 MiB (0.2%) 2: cpu: 1.2% command: ld-2.28.so pid: 176 mem: 30.2 MiB (3.2%) 3: cpu: 1.2% command: ld-2.28.so pid: 181 mem: 29.4 MiB (3.1%) 4: cpu: 0.8% command: backend pid: 182 mem: 14.0 MiB (1.5%) 5: cpu: 0.5% command: [kworker/0:0h-mmc_complete] pid: 699 mem: 0.00 MiB (0.0%) Memory top: 5 of 142 1: mem: 30.2 MiB (3.2%) command: ld-2.28.so pid: 176 cpu: 1.2% 2: mem: 29.4 MiB (3.1%) command: ld-2.28.so pid: 181 cpu: 1.2% 3: mem: 26.5 MiB (2.8%) command: ld-2.28.so pid: 467 cpu: 0.0% 4: mem: 26.1 MiB (2.8%) command: ld-2.28.so pid: 470 cpu: 0.0% 5: mem: 25.9 MiB (2.8%) command: ld-2.28.so pid: 466 cpu: 0.0% Info: Processes: 142 Uptime: 55m Init: systemd v: 241 target: graphical (5) default: graphical tool: systemctl Compilers: gcc: N/A Shell: Storage.sh (sudo) default: Bash v: 5.0.3 running-in: pty pts/1 (SSH) inxi: 3.3.21

inxi Results

System:
  Host: syncloud Kernel: 5.10.63-v7+ arch: armv7l bits: 32 compiler: N/A
    parameters: coherent_pool=1M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1
    bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000
    vc_mem.mem_size=0x40000000 console=ttyAMA0,115200 console=tty1 root=PARTUUID=43f6ece2-02
    rootfstype=ext4 fsck.repair=yes rootwait quiet init=/sbin/init
  Console: pty pts/1 Distro: Debian GNU/Linux 10 (buster)
Machine:
  Type: ARM System: Raspberry Pi 2 Model B Rev 1.1 details: BCM2835 rev: a21041
    Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 923.2 MiB used: 195.2 MiB (21.1%)
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: ARMv7 v7l variant: cortex-a7 bits: 32 type: MCP arch: v7l family: 7 model-id: 0
    stepping: 5
  Topology: cpus: 1x cores: 4 smt: N/A cache: N/A
  Speed (MHz): avg: 600 min/max: 600/900 scaling: driver: cpufreq-dt governor: powersave cores:
    1: 600 2: 600 3: 600 4: 600 bogomips: N/A
  Features: edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4
  Vulnerabilities: No CPU vulnerability/bugs data available.
Graphics:
  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus-ID: N/A chip-ID: brcm:soc class-ID: fb
  Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
  Display: server: No display server data found. Headless machine? tty: 157x41
  Message: Unable to show GL data. Required tool glxinfo missing.
Audio:
  Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio
    class-ID: bcm2835_audio
  Device-2: bcm2835-hdmi driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
  Sound Server-1: ALSA v: k5.10.63-v7+ running: yes
Network:
  Device-1: bcm2835-sdhci driver: N/A port: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: mmcnr
  IF: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IP v4: 192.168.X.X/24 type: dynamic scope: global broadcast: 192.168.X.X
  IP v6: fe80::ba27:ebff:fe0f:f9f2/64 scope: link
  Device-2: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB
    driver: smsc95xx bus-ID: 1-1.1:3 chip-ID: 0424:ec00 class-ID: ff00
  IF: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IP v4: 192.168.X.X/24 type: dynamic scope: global broadcast: 192.168.X.X
  IP v6: fe80::ba27:ebff:fe0f:f9f2/64 scope: link
  WAN IP: 220.240.X.X
Bluetooth:
  Message: No bluetooth data found.
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 115.54 GiB used: 1.18 GiB (1.0%)
  ID-1: /dev/mmcblk0 maj-min: 179:0 model: USD size: 3.75 GiB block-size: physical: 512 B
    logical: 512 B type: SSD scheme: MBR
  SMART Message: Unknown smartctl error. Unable to generate data.
  ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Kingston model: SV300S37A120G
    family: Driven SSDs size: 111.79 GiB block-size: physical: 512 B logical: 512 B sata: 3.0
    speed: 6.0 Gb/s type: SSD rev: 1.75 drive rev: 605ABBF2 temp: 31 C
    scheme: GPT
  SMART: yes state: enabled health: PASSED on: 6y 9d 13h cycles: 132 read: 154 GiB
    written: 7847 GiB
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 3.5 GiB size: 3.38 GiB (96.64%) used: 1.12 GiB (33.2%) fs: ext4
    block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: N/A
    uuid: ccbe1f98-54b5-495f-affb-a570a10d0921
  ID-2: /opt/disk/external raw-size: 111.79 GiB size: 109.53 GiB (97.98%) used: 61.1 MiB (0.1%)
    fs: ext4 block-size: 4096 B dev: /dev/sda1 maj-min: 8:1 label: N/A
    uuid: ff635efc-137f-4344-9223-27a507113181
Swap:
  Alert: No swap data was found.
Unmounted:
  ID-1: /dev/mmcblk0p1 maj-min: 179:1 size: 256 MiB fs: vfat label: boot uuid: 0213-DFD6
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s
    power: 2mA chip-ID: 0424:9514 class-ID: 0900
  Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter
    type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 2mA
    chip-ID: 0424:ec00 class-ID: ff00
  Device-2: 1-1.3:4 info: Western Digital Elements Portable (WDBAAR) type: Mass Storage
    driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 1058:1010
    class-ID: 0806 Sensors:
  Missing: Required tool sensors not installed. Check --recommends
Repos:
  Packages: 300 pm: dpkg pkgs: 298 libs: 179 tools: apt,apt-get pm: snap pkgs: 2
  Active apt repos in: /etc/apt/sources.list
    1: deb http://http.debian.net/debian buster main
Processes:
  CPU top: 5 of 142
  1: cpu: 1.5% command: top pid: 667 mem: 2.44 MiB (0.2%)
  2: cpu: 1.2% command: ld-2.28.so pid: 176 mem: 30.2 MiB (3.2%)
  3: cpu: 1.2% command: ld-2.28.so pid: 181 mem: 29.4 MiB (3.1%)
  4: cpu: 0.8% command: backend pid: 182 mem: 14.0 MiB (1.5%)
  5: cpu: 0.5% command: [kworker/0:0h-mmc_complete] pid: 699 mem: 0.00 MiB (0.0%)
  Memory top: 5 of 142
  1: mem: 30.2 MiB (3.2%) command: ld-2.28.so pid: 176 cpu: 1.2%
  2: mem: 29.4 MiB (3.1%) command: ld-2.28.so pid: 181 cpu: 1.2%
  3: mem: 26.5 MiB (2.8%) command: ld-2.28.so pid: 467 cpu: 0.0%
  4: mem: 26.1 MiB (2.8%) command: ld-2.28.so pid: 470 cpu: 0.0%
  5: mem: 25.9 MiB (2.8%) command: ld-2.28.so pid: 466 cpu: 0.0%
Info:
  Processes: 142 Uptime: 55m Init: systemd v: 241 target: graphical (5) default: graphical
  tool: systemctl Compilers: gcc: N/A Shell: Storage.sh (sudo) default: Bash v: 5.0.3
  running-in: pty pts/1 (SSH) inxi: 3.3.21

Benchmark #62201 - Brand: Kingston SSDNow V300