Benchmark #62293 - pibenchmarks.com

Brand: Samsung 970 EVO
SSD (M.2 NVMe)
#56 / 1,679
310
#192 / 1,679
#190 / 984
#180 / 281
28,233
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2022-08-29 15:59:48
#62,293
7,884
-20,349 (-258.11%)
penfold
Samsung 970 EVO Plus M.2 in USB 3 gumstick case

Storage Details
Samsung 970 EVO
SSD (M.2 NVMe)
465.5G
SSD
Samsung
SSD970EVO2B2Q
3.20
5,000
0789:0578
0x0789 (Logitec Corp.)
0x0578 (JMS578 SATA 6Gb/s)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
N/A
4
1,800 (+300)
500
8 GB
1,600

Operating System

Debian GNU/Linux 11 (bullseye)
aarch64

Benchmark Results
124 MB/s
329.82 MB/s
334.72 MB/s
12,367 IOPS
18,269 IOPS
49,468 KB/s
73,077 KB/s
31,024 KB/s
30,103 KB/s
25,244 KB/s
30,258 KB/s

inxi Results
System: Kernel: 5.15.32-v8+ arch: aarch64 bits: 64 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=eebbada2-02 rootfstype=ext4 fsck.repair=yes rootwait Console: pty pts/0 Distro: Raspberry Pi OS base: Debian GNU/Linux 11 (bullseye) Machine: Type: ARM System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2835 rev: d03114 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 7.7 GiB used: 1.05 GiB (13.7%) gpu: 76 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 Topology: cpus: 1x cores: 4 smt: N/A cache: N/A Speed (MHz): avg: 1800 min/max: 600/1800 scaling: driver: cpufreq-dt governor: ondemand cores: 1: 1800 2: 1800 3: 1800 4: 1800 bogomips: 432 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: No display server data found. Headless machine? tty: 80x40 Message: Unable to show GL data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Sound Server-1: ALSA v: k5.15.32-v8+ running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: down mac: Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-1: br-83ac586bdff5 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: br-898964eb9673 state: down mac: Message: Output throttled. IPs: 1! Limit: 10! Override: --limit [1-x!-1 all] IF-ID-3: docker0 state: down mac: Message: Output throttled. IPs: 2! Limit: 10! Override: --limit [1-x!-1 all] IF-ID-4: veth199ab98 state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: veth31f1076 state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: veth39158be state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: veth420a93c state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: veth799b652 state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: veth9d8c065 state: up speed: 10000 Mbps duplex: full mac: IF-ID-10: vetha34d78b state: up speed: 10000 Mbps duplex: full mac: IF-ID-11: vethe20d03a state: up speed: 10000 Mbps duplex: full mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 465.76 GiB used: 26.39 GiB (5.7%) ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Samsung model: SSD 970 EVO 2B2Q size: 465.76 GiB block-size: physical: 4096 B logical: 512 B type: SSD rev: 0204 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No optical or floppy data found. Partition: ID-1: / raw-size: 465.51 GiB size: 457.13 GiB (98.20%) used: 26.36 GiB (5.8%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: PENFOLD_NVME uuid: 241a9710-d13f-41be-9619-d27c4d2bb4f8 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 30.1 MiB (11.9%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: N/A uuid: 5254-F205 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 5.8 MiB (5.8%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 1-1.2:3 info: VIA Labs VL813 Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip-ID: 2109:2813 class-ID: 0900 Hub-4: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Hub-5: 2-2:2 info: VIA Labs VL813 Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 2109:0813 class-ID: 0900 Device-1: 2-2.1:3 info: Logitec JMS583 type: Mass Storage driver: uas interfaces: 1 rev: 3.2 speed: 5 Gb/s power: 896mA chip-ID: 0789:0578 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: pm: dpkg pkgs: 731 libs: 411 tools: apt,apt-get Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian bullseye main contrib non-free 2: deb http: //security.debian.org/debian-security bullseye-security main contrib non-free 3: deb http: //deb.debian.org/debian bullseye-updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=arm64 signed-by=/etc/apt/keyrings/docker.gpg] https: //download.docker.com/linux/debian bullseye stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ bullseye main Processes: CPU top: 5 of 207 1: cpu: 27.0% command: dockerd pid: 581 mem: 86.7 MiB (1.1%) 2: cpu: 0.6% command: python pid: 1496 mem: 124.0 MiB (1.5%) 3: cpu: 0.5% command: [kswapd0] pid: 72 mem: 0.00 MiB (0.0%) 4: cpu: 0.3% command: [kcompactd0] pid: 43 mem: 0.00 MiB (0.0%) 5: cpu: 0.3% command: redis-server pid: 1519 mem: 4.32 MiB (0.0%) Memory top: 5 of 207 1: mem: 128.5 MiB (1.6%) command: daphne started by: python pid: 1776 cpu: 0.2% 2: mem: 124.0 MiB (1.5%) command: python pid: 1496 cpu: 0.6% 3: mem: 113.3 MiB (1.4%) command: next started by: node pid: 9518 cpu: 0.2% 4: mem: 101.3 MiB (1.2%) command: next started by: node pid: 6718 cpu: 0.0% 5: mem: 87.4 MiB (1.1%) command: start.js started by: node pid: 3077 cpu: 0.0% Info: Processes: 207 Uptime: 1h 47m Init: systemd v: 247 target: multi-user (3) default: multi-user tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.21

inxi Results

System:
  Kernel: 5.15.32-v8+ arch: aarch64 bits: 64 compiler: N/A parameters: coherent_pool=1M
    8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1
    smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000
    console=ttyS0,115200 console=tty1 root=PARTUUID=eebbada2-02 rootfstype=ext4 fsck.repair=yes
    rootwait
  Console: pty pts/0 Distro: Raspberry Pi OS base: Debian GNU/Linux 11 (bullseye)
Machine:
  Type: ARM System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2835 rev: d03114 Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 7.7 GiB used: 1.05 GiB (13.7%) gpu: 76 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0
    stepping: 3
  Topology: cpus: 1x cores: 4 smt: N/A cache: N/A
  Speed (MHz): avg: 1800 min/max: 600/1800 scaling: driver: cpufreq-dt governor: ondemand cores:
    1: 1800 2: 1800 3: 1800 4: 1800 bogomips: 432
  Features: asimd cpuid crc32 evtstrm fp
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 status: Vulnerable
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700
    class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700
    class-ID: hdmi
  Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu
  Display: server: No display server data found. Headless machine? tty: 80x40
  Message: Unable to show GL data. Required tool glxinfo missing.
Audio:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi
  Device-3: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio
    class-ID: bcm2835_audio
  Sound Server-1: ALSA v: k5.15.32-v8+ running: yes
Network:
  Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000
    class-ID: mmcnr
  IF: wlan0 state: down mac: 
  Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
    chip-ID: brcm:fd580000 class-ID: ethernet
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 
  IP v4:  type: dynamic noprefixroute scope: global broadcast: 
  IP v6:  scope: link
  IF-ID-1: br-83ac586bdff5 state: up speed: 10000 Mbps duplex: unknown mac: 
  IP v4:  scope: global broadcast: 
  IP v6:  scope: link
  IF-ID-2: br-898964eb9673 state: down mac: 
  Message: Output throttled. IPs: 1! Limit: 10! Override: --limit [1-x!-1 all]
  IF-ID-3: docker0 state: down mac: 
  Message: Output throttled. IPs: 2! Limit: 10! Override: --limit [1-x!-1 all]
  IF-ID-4: veth199ab98 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-5: veth31f1076 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-6: veth39158be state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-7: veth420a93c state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-8: veth799b652 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-9: veth9d8c065 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-10: vetha34d78b state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-11: vethe20d03a state: up speed: 10000 Mbps duplex: full mac: 
  WAN IP: 
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address:  bt-v: 3.0 lmp-v: 5.0
    sub-v: 6119 hci-v: 5.0 rev: 156
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 465.76 GiB used: 26.39 GiB (5.7%)
  ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Samsung model: SSD 970 EVO 2B2Q size: 465.76 GiB
    block-size: physical: 4096 B logical: 512 B type: SSD rev: 0204 scheme: MBR
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 465.51 GiB size: 457.13 GiB (98.20%) used: 26.36 GiB (5.8%) fs: ext4
    block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: PENFOLD_NVME
    uuid: 241a9710-d13f-41be-9619-d27c4d2bb4f8
  ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 30.1 MiB (11.9%) fs: vfat
    block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: N/A uuid: 5254-F205
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 100 MiB used: 5.8 MiB (5.8%) priority: -2 file: /var/swap
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA
    chip-ID: 2109:3431 class-ID: 0900
  Hub-3: 1-1.2:3 info: VIA Labs VL813 Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip-ID: 2109:2813
    class-ID: 0900
  Hub-4: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003
    class-ID: 0900
  Hub-5: 2-2:2 info: VIA Labs VL813 Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 2109:0813
    class-ID: 0900
  Device-1: 2-2.1:3 info: Logitec JMS583 type: Mass Storage driver: uas interfaces: 1 rev: 3.2
    speed: 5 Gb/s power: 896mA chip-ID: 0789:0578 class-ID: 0806 Sensors:
  Missing: Required tool sensors not installed. Check --recommends
Repos:
  Packages: pm: dpkg pkgs: 731 libs: 411 tools: apt,apt-get
  Active apt repos in: /etc/apt/sources.list
    1: deb http: //deb.debian.org/debian bullseye main contrib non-free
    2: deb http: //security.debian.org/debian-security bullseye-security main contrib non-free
    3: deb http: //deb.debian.org/debian bullseye-updates main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/docker.list
    1: deb [arch=arm64 signed-by=/etc/apt/keyrings/docker.gpg] https: //download.docker.com/linux/debian bullseye stable
  Active apt repos in: /etc/apt/sources.list.d/raspi.list
    1: deb http: //archive.raspberrypi.org/debian/ bullseye main
Processes:
  CPU top: 5 of 207
  1: cpu: 27.0% command: dockerd pid: 581 mem: 86.7 MiB (1.1%)
  2: cpu: 0.6% command: python pid: 1496 mem: 124.0 MiB (1.5%)
  3: cpu: 0.5% command: [kswapd0] pid: 72 mem: 0.00 MiB (0.0%)
  4: cpu: 0.3% command: [kcompactd0] pid: 43 mem: 0.00 MiB (0.0%)
  5: cpu: 0.3% command: redis-server pid: 1519 mem: 4.32 MiB (0.0%)
  Memory top: 5 of 207
  1: mem: 128.5 MiB (1.6%) command: daphne started by: python pid: 1776 cpu: 0.2%
  2: mem: 124.0 MiB (1.5%) command: python pid: 1496 cpu: 0.6%
  3: mem: 113.3 MiB (1.4%) command: next started by: node pid: 9518 cpu: 0.2%
  4: mem: 101.3 MiB (1.2%) command: next started by: node pid: 6718 cpu: 0.0%
  5: mem: 87.4 MiB (1.1%) command: start.js started by: node pid: 3077 cpu: 0.0%
Info:
  Processes: 207 Uptime: 1h 47m Init: systemd v: 247 target: multi-user (3) default: multi-user
  tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release
  inxi: 3.3.21

Benchmark #62293 - Brand: Samsung 970 EVO