Benchmark #6286 - pibenchmarks.com

Brand: Drevo X1
SSD (2.5" SATA)
#727 / 1,679
8
#727 / 1,679
#702 / 984
#206 / 370
5,855
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.es Amazon.fr Amazon.it

Overview
2020-01-04 13:56:09
#6,286
6,104
+249 (+4.08%)
Anonymous

Storage Details
Drevo X1
SSD (2.5" SATA)
120G
SSD
Drevo
X1SSD
SATA
3.00
5,000
174c:55aa
0x174c (ASMedia Technology Inc.)
0x55aa (ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
174 MB/s
225.3 MB/s
195.33 MB/s
12,054 IOPS
19,635 IOPS
48,216 KB/s
78,542 KB/s
17,719 KB/s
13,417 KB/s
13,663 KB/s
14,736 KB/s

inxi Results
System: Host: pimatic-pi3bplus Kernel: 4.19.75-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.88 GiB used: 701.8 MiB (17.7%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 168x44 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.75-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-3: hassio state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-4: veth06fec1f state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: veth26ab1b9 state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: veth35b6895 state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: veth7133ff4 state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: vethe151ddb state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 140.76 GiB used: 40.26 GiB (28.6%) ID-1: /dev/mmcblk0 model: SD32G size: 28.97 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: Drevo model: X1 SSD size: 111.79 GiB block size: physical: 512 B logical: 512 B scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 111.73 GiB size: 110.00 GiB (98.46%) used: 20.10 GiB (18.3%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: N/A uuid: eda95d8a-9cdd-4224-96d0-890b4791600c ID-2: /boot raw size: 60.0 MiB size: 59.9 MiB (99.91%) used: 53.5 MiB (89.3%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 947B-B89A ID-3: /var/lib/docker/overlay2/31116d9fa560a32081b18802c8a24c20814afb5ddd29b738b552b9dd3ed41848/merged raw size: N/A size: 110.00 GiB used: 20.10 GiB (18.3%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-4: /var/lib/docker/overlay2/7f5b3c24a78c151f13f1f9c00d3a4e79293f4c2fa5a26cbe6ba2deb16400100d/merged raw size: N/A size: 110.00 GiB used: 20.10 GiB (18.3%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-5: /var/lib/docker/overlay2/b1df0bf2639efc70421f1f2509eb3c329e9293f49ba5e9caf531740aa70ae1bc/merged raw size: N/A size: 110.00 GiB used: 20.10 GiB (18.3%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-6: /var/lib/docker/overlay2/becc0787b4af40b57729803c78a158b65a992d38737a6a5e7d1b14d701580992/merged raw size: N/A size: 110.00 GiB used: 20.10 GiB (18.3%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-7: /var/lib/docker/overlay2/c45428662557f227549d4f77daa5121a8b3ec45ce8df8c2c7120941cf4f4fffd/merged raw size: N/A size: 110.00 GiB used: 20.10 GiB (18.3%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-8: /var/lib/docker/overlay2/fd993d54efd678836beced48fb4824a9a946e1cf00c05e8f1556e44ff7847359/merged raw size: N/A size: 110.00 GiB used: 20.10 GiB (18.3%) fs: overlay source: ERR-102 label: N/A uuid: N/A Unmounted: ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: boot uuid: 5203-DB74 ID-2: /dev/mmcblk0p2 size: 28.71 GiB fs: ext4 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //mirror.netcologne.de/raspbian/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main ui Processes: CPU top: 5 1: cpu: 12.5% command: pimatic.js started by: node pid: 1062 mem: 165.9 MiB (4.1%) 2: cpu: 8.0% command: python3 pid: 2087 mem: 73.0 MiB (1.8%) 3: cpu: 1.2% command: init pid: 1 mem: 8.10 MiB (0.2%) 4: cpu: 0.9% command: node pid: 4189 mem: 55.4 MiB (1.4%) 5: cpu: 0.8% command: dockerd pid: 631 mem: 65.6 MiB (1.6%) Memory top: 5 1: mem: 165.9 MiB (4.1%) command: pimatic.js started by: node pid: 1062 cpu: 12.5% 2: mem: 73.0 MiB (1.8%) command: python3 pid: 2087 cpu: 8.0% 3: mem: 65.6 MiB (1.6%) command: dockerd pid: 631 cpu: 0.8% 4: mem: 58.0 MiB (1.4%) command: mysqld pid: 4191 cpu: 0.1% 5: mem: 55.4 MiB (1.4%) command: node pid: 4189 cpu: 0.9% Info: Processes: 182 Uptime: 10m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 4.9/6/8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: pimatic-pi3bplus Kernel: 4.19.75-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 
           vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.88 GiB used: 701.8 MiB (17.7%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 168x44 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.75-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-3: hassio state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-4: veth06fec1f state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-5: veth26ab1b9 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-6: veth35b6895 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-7: veth7133ff4 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-8: vethe151ddb state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-9: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 140.76 GiB used: 40.26 GiB (28.6%) 
           ID-1: /dev/mmcblk0 model: SD32G size: 28.97 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: Drevo model: X1 SSD size: 111.79 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 111.73 GiB size: 110.00 GiB (98.46%) used: 20.10 GiB (18.3%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: N/A uuid: eda95d8a-9cdd-4224-96d0-890b4791600c 
           ID-2: /boot raw size: 60.0 MiB size: 59.9 MiB (99.91%) used: 53.5 MiB (89.3%) fs: vfat 
           block size: 512 B dev: /dev/sda1 label: boot uuid: 947B-B89A 
           ID-3: /var/lib/docker/overlay2/31116d9fa560a32081b18802c8a24c20814afb5ddd29b738b552b9dd3ed41848/merged raw size: N/A size: 110.00 GiB used: 20.10 GiB (18.3%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-4: /var/lib/docker/overlay2/7f5b3c24a78c151f13f1f9c00d3a4e79293f4c2fa5a26cbe6ba2deb16400100d/merged raw size: N/A size: 110.00 GiB used: 20.10 GiB (18.3%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-5: /var/lib/docker/overlay2/b1df0bf2639efc70421f1f2509eb3c329e9293f49ba5e9caf531740aa70ae1bc/merged raw size: N/A size: 110.00 GiB used: 20.10 GiB (18.3%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-6: /var/lib/docker/overlay2/becc0787b4af40b57729803c78a158b65a992d38737a6a5e7d1b14d701580992/merged raw size: N/A size: 110.00 GiB used: 20.10 GiB (18.3%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-7: /var/lib/docker/overlay2/c45428662557f227549d4f77daa5121a8b3ec45ce8df8c2c7120941cf4f4fffd/merged raw size: N/A size: 110.00 GiB used: 20.10 GiB (18.3%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-8: /var/lib/docker/overlay2/fd993d54efd678836beced48fb4824a9a946e1cf00c05e8f1556e44ff7847359/merged raw size: N/A size: 110.00 GiB used: 20.10 GiB (18.3%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
Unmounted: ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: boot uuid: 5203-DB74 
           ID-2: /dev/mmcblk0p2 size: 28.71 GiB fs: ext4 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa 
           Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //mirror.netcologne.de/raspbian/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main ui
Processes: CPU top: 5 
           1: cpu: 12.5% command: pimatic.js started by: node pid: 1062 mem: 165.9 MiB (4.1%) 
           2: cpu: 8.0% command: python3 pid: 2087 mem: 73.0 MiB (1.8%) 
           3: cpu: 1.2% command: init pid: 1 mem: 8.10 MiB (0.2%) 
           4: cpu: 0.9% command: node pid: 4189 mem: 55.4 MiB (1.4%) 
           5: cpu: 0.8% command: dockerd pid: 631 mem: 65.6 MiB (1.6%) 
           Memory top: 5 
           1: mem: 165.9 MiB (4.1%) command: pimatic.js started by: node pid: 1062 cpu: 12.5% 
           2: mem: 73.0 MiB (1.8%) command: python3 pid: 2087 cpu: 8.0% 
           3: mem: 65.6 MiB (1.6%) command: dockerd pid: 631 cpu: 0.8% 
           4: mem: 58.0 MiB (1.4%) command: mysqld pid: 4191 cpu: 0.1% 
           5: mem: 55.4 MiB (1.4%) command: node pid: 4189 cpu: 0.9% 
Info:      Processes: 182 Uptime: 10m Init: systemd v: 241 runlevel: 3 target: multi-user.target 
           Compilers: gcc: 8.3.0 alt: 4.9/6/8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

Benchmark #6286 - Brand: Drevo X1