Benchmark #63156 - pibenchmarks.com

Brand: SanDisk X110 M.2
SSD (M.2 SATA)
#933 / 1,679
4
#890 / 1,679
#847 / 984
#105 / 115
4,653
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.se

Overview
2022-10-02 12:51:42
#63,156
2,883
-1,770 (-61.39%)
Anonymous

Storage Details
SanDisk X110 M.2
SSD (M.2 SATA)
256G
SSD
SanDisk
SD6SP1M256G1012
SATA
2.10
480
152d:0580
0x152d (JMicron Technology Corp. / JMicron USA Technology Corp.)
0x0580 (JM580)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.5
Raspberry Pi 4 Model B Rev 1.5
Raspberry Pi Foundation
N/A
4
1,500
2 GB

Operating System

Debian GNU/Linux 11 (bullseye)
aarch64

Benchmark Results
29.7 MB/s
33.93 MB/s
32.73 MB/s
3,964 IOPS
3,595 IOPS
15,857 KB/s
14,382 KB/s
12,739 KB/s
12,594 KB/s
10,679 KB/s
13,654 KB/s

inxi Results
System: Kernel: 5.10.0-11-arm64 arch: aarch64 bits: 64 compiler: gcc v: 10.2.1 parameters: dma.dmachans=0x37f5 bcm2709.boardrev=0xb03115 bcm2709.serial=0xaddfba6f bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=tty0 console=ttyS1,115200 root=LABEL=RASPIROOT rw fsck.repair=yes net.ifnames=0 rootwait Console: pty pts/0 Distro: Debian GNU/Linux 11 (bullseye) Machine: Type: ARM System: Raspberry Pi 4 Model B Rev 1.5 details: N/A Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 1.8 GiB used: 335.8 MiB (18.2%) RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 Topology: cpus: 1x cores: 4 smt: cache: N/A Speed (MHz): avg: 750 high: 1200 min/max: 600/1500 scaling: driver: cpufreq-dt governor: schedutil cores: 1: 1200 2: 600 3: 600 4: 600 bogomips: 432 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: No display server data found. Headless machine? tty: 80x40 Message: Unable to show GL data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Sound Server-1: ALSA v: k5.10.0-11-arm64 running: yes Network: Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic scope: global broadcast: IP v6: scope: link Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq Device-3: Ralink RT2870/RT3070 Wireless Adapter type: USB driver: rt2800usb bus-ID: 1-1.3:3 chip-ID: 148f:3070 class-ID: 0000 IF: wlan1 state: down mac: IF-ID-1: docker0 state: down mac: IP v4: scope: global broadcast: IF-ID-2: wlan0 state: down mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: rfkill ID: hci0 rfk-id: 2 state: down bt-service: not found rfk-block: hardware: no software: no address: see --recommends Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial Report: This feature requires one of these tools: hciconfig/bt-adapter Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 238.47 GiB used: 1.51 GiB (0.6%) ID-1: /dev/sda maj-min: 8:0 type: USB vendor: SanDisk model: SD6SP1M256G1012 size: 238.47 GiB block-size: physical: 4096 B logical: 512 B type: SSD rev: 0105 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No optical or floppy data found. Partition: ID-1: / raw-size: 238.08 GiB size: 234.45 GiB (98.48%) used: 1.43 GiB (0.6%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT uuid: d850171d-fc25-4fe3-b6ea-5fe2bca1d86b ID-2: /boot/firmware raw-size: 396 MiB size: 395.8 MiB (99.94%) used: 74.1 MiB (18.7%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: A4ED-003B Swap: Alert: No swap data was found. Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.3:3 info: Ralink RT2870/RT3070 Wireless Adapter type: Network driver: rt2800usb interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 450mA chip-ID: 148f:3070 class-ID: 0000 Device-2: 1-1.4:4 info: JMicron / USA External type: Mass Storage driver: uas interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 30mA chip-ID: 152d:0580 class-ID: 0806 Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: pm: dpkg pkgs: 341 libs: 191 tools: apt,apt-get Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian bullseye main contrib non-free 2: deb http: //security.debian.org/debian-security bullseye-security main contrib non-free Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=arm64 signed-by=/etc/apt/keyrings/docker.gpg] https: //download.docker.com/linux/debian bullseye stable Processes: CPU top: 5 of 134 1: cpu: 0.4% command: [kworker/3:1-mm_percpu_wq] pid: 1953 mem: 0.00 MiB (0.0%) 2: cpu: 0.3% command: smartd pid: 3432 mem: 4.78 MiB (0.2%) 3: cpu: 0.2% command: [kworker/u8:3-events_unbound] pid: 2811 mem: 0.00 MiB (0.0%) 4: cpu: 0.1% command: [irq/27-mmc1] pid: 141 mem: 0.00 MiB (0.0%) 5: cpu: 0.1% command: containerd pid: 2315 mem: 51.6 MiB (2.7%) Memory top: 5 of 134 1: mem: 65.1 MiB (3.5%) command: dockerd pid: 2405 cpu: 0.0% 2: mem: 51.6 MiB (2.7%) command: containerd pid: 2315 cpu: 0.1% 3: mem: 14.0 MiB (0.7%) command: systemd-journald pid: 241 cpu: 0.0% 4: mem: 9.73 MiB (0.5%) command: init pid: 1 cpu: 0.0% 5: mem: 7.69 MiB (0.4%) command: systemd pid: 1049 cpu: 0.0% Info: Processes: 134 Uptime: 3h 49m Init: systemd v: 247 target: graphical (5) default: graphical tool: systemctl Compilers: gcc: N/A Client: shell wrapper v: 5.1.4-release inxi: 3.3.21

inxi Results

System:
  Kernel: 5.10.0-11-arm64 arch: aarch64 bits: 64 compiler: gcc v: 10.2.1 parameters:
    dma.dmachans=0x37f5 bcm2709.boardrev=0xb03115 bcm2709.serial=0xaddfba6f
    bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0
    smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000
    console=tty0 console=ttyS1,115200 root=LABEL=RASPIROOT rw fsck.repair=yes net.ifnames=0
    rootwait
  Console: pty pts/0 Distro: Debian GNU/Linux 11 (bullseye)
Machine:
  Type: ARM System: Raspberry Pi 4 Model B Rev 1.5 details: N/A Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 1.8 GiB used: 335.8 MiB (18.2%)
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0
    stepping: 3
  Topology: cpus: 1x cores: 4 smt:  cache: N/A
  Speed (MHz): avg: 750 high: 1200 min/max: 600/1500 scaling: driver: cpufreq-dt
    governor: schedutil cores: 1: 1200 2: 600 3: 600 4: 600 bogomips: 432
  Features: asimd cpuid crc32 evtstrm fp
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 status: Vulnerable
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700
    class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700
    class-ID: hdmi
  Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu
  Display: server: No display server data found. Headless machine? tty: 80x40
  Message: Unable to show GL data. Required tool glxinfo missing.
Audio:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi
  Sound Server-1: ALSA v: k5.10.0-11-arm64 running: yes
Network:
  Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000
    class-ID: ethernet
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 
  IP v4:  type: dynamic scope: global broadcast: 
  IP v6:  scope: link
  Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A
    chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq
  Device-3: Ralink RT2870/RT3070 Wireless Adapter type: USB driver: rt2800usb bus-ID: 1-1.3:3
    chip-ID: 148f:3070 class-ID: 0000 IF: wlan1 state: down mac: 
  IF-ID-1: docker0 state: down mac: 
  IP v4:  scope: global broadcast: 
  IF-ID-2: wlan0 state: down mac: 
  WAN IP: 
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
  Report: rfkill ID: hci0 rfk-id: 2 state: down bt-service: not found rfk-block: hardware: no
    software: no address: see --recommends
  Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial
  Report: This feature requires one of these tools: hciconfig/bt-adapter
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 238.47 GiB used: 1.51 GiB (0.6%)
  ID-1: /dev/sda maj-min: 8:0 type: USB vendor: SanDisk model: SD6SP1M256G1012 size: 238.47 GiB
    block-size: physical: 4096 B logical: 512 B type: SSD rev: 0105 scheme: MBR
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 238.08 GiB size: 234.45 GiB (98.48%) used: 1.43 GiB (0.6%) fs: ext4
    block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT
    uuid: d850171d-fc25-4fe3-b6ea-5fe2bca1d86b
  ID-2: /boot/firmware raw-size: 396 MiB size: 395.8 MiB (99.94%) used: 74.1 MiB (18.7%)
    fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: A4ED-003B
Swap:
  Alert: No swap data was found.
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA
    chip-ID: 2109:3431 class-ID: 0900
  Device-1: 1-1.3:3 info: Ralink RT2870/RT3070 Wireless Adapter type: Network driver: rt2800usb
    interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 450mA chip-ID: 148f:3070 class-ID: 0000
    Device-2: 1-1.4:4 info: JMicron / USA External type: Mass Storage driver: uas interfaces: 1
    rev: 2.1 speed: 480 Mb/s power: 30mA chip-ID: 152d:0580 class-ID: 0806 Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003
    class-ID: 0900
Sensors:
  Missing: Required tool sensors not installed. Check --recommends
Repos:
  Packages: pm: dpkg pkgs: 341 libs: 191 tools: apt,apt-get
  Active apt repos in: /etc/apt/sources.list
    1: deb http: //deb.debian.org/debian bullseye main contrib non-free
    2: deb http: //security.debian.org/debian-security bullseye-security main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/docker.list
    1: deb [arch=arm64 signed-by=/etc/apt/keyrings/docker.gpg] https: //download.docker.com/linux/debian bullseye stable
Processes:
  CPU top: 5 of 134
  1: cpu: 0.4% command: [kworker/3:1-mm_percpu_wq] pid: 1953 mem: 0.00 MiB (0.0%)
  2: cpu: 0.3% command: smartd pid: 3432 mem: 4.78 MiB (0.2%)
  3: cpu: 0.2% command: [kworker/u8:3-events_unbound] pid: 2811 mem: 0.00 MiB (0.0%)
  4: cpu: 0.1% command: [irq/27-mmc1] pid: 141 mem: 0.00 MiB (0.0%)
  5: cpu: 0.1% command: containerd pid: 2315 mem: 51.6 MiB (2.7%)
  Memory top: 5 of 134
  1: mem: 65.1 MiB (3.5%) command: dockerd pid: 2405 cpu: 0.0%
  2: mem: 51.6 MiB (2.7%) command: containerd pid: 2315 cpu: 0.1%
  3: mem: 14.0 MiB (0.7%) command: systemd-journald pid: 241 cpu: 0.0%
  4: mem: 9.73 MiB (0.5%) command: init pid: 1 cpu: 0.0%
  5: mem: 7.69 MiB (0.4%) command: systemd pid: 1049 cpu: 0.0%
Info:
  Processes: 134 Uptime: 3h 49m Init: systemd v: 247 target: graphical (5) default: graphical
  tool: systemctl Compilers: gcc: N/A Client: shell wrapper v: 5.1.4-release inxi: 3.3.21

Benchmark #63156 - Brand: SanDisk X110 M.2