Benchmark #6345 - pibenchmarks.com

Brand: Transcend SSD300 Series
SSD (2.5" SATA)
#171 / 1,672
86
#832 / 1,672
#799 / 983
#262 / 370
5,103
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-01-05 09:46:33
#6,345
2,713
-2,390 (-88.09%)
hunter2409
64gb

Storage Details
Transcend SSD300 Series
SSD (2.5" SATA)
64G
SSD
Transcend
TS64GSSD340K
2.5 inch
SATA
None

System Board Details
		Amazon.com AliExpress
Banana Pi M2
M2 sun8iw11p1
Pine64
1,200

Operating System

Raspbian GNU/Linux 9 (stretch)
armv7l

Benchmark Results
33.9 MB/s
190.25 MB/s
174.41 MB/s
2,810 IOPS
14,163 IOPS
11,243 KB/s
56,652 KB/s
11,010 KB/s
7,038 KB/s
10,418 KB/s
9,312 KB/s

inxi Results
System: Host: bpi-m2 Kernel: 3.10.107-BPI-M2U-Kernel armv7l bits: 32 compiler: gcc v: 5.4.0 parameters: board=bpi-m2u console=earlyprintk=sunxi-uart,0x01c28000 console=tty1 console=ttyS0,115200n8 no_console_suspend consoleblank=0 root=/dev/sda1 rootfstype=ext4 rw rootwait bootmenutimeout=10 datadev=sda1 service=linux bpiuser=720p enforcing=1 initcall_debug=0 loglevel=4 init=/init cma=256M panic=10 disp.screen0_output_type=3 disp.screen0_output_mode=5 disp.screen1_output_type=3 disp.screen1_output_mode=5 androidboot.serialno=94407872c61814220acf Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 9 (stretch) Machine: Type: ARM Device System: sun8iw11p1 rev: N/A N/A Memory: RAM: total: 998.6 MiB used: 156.6 MiB (15.7%) RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant-1: armv7 variant-2: sunxi bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 5 microcode: N/A bogomips: 228 Speed: 1200 MHz min/max: 480/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 4: 1200 Features: edsp fastmult half idiva idivt neon swp thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: sun50i-disp driver: disp v: kernel bus ID: N/A chip ID: allwinner:disp Device-2: sunxi-hdmi driver: hdmi v: N/A bus ID: N/A chip ID: allwinner:hdmi Device-3: mali-400 driver: N/A bus ID: N/A chip ID: arm:gpu_mali400_0 Display: server: X.org 1.19.2 driver: fbturbo tty: 80x24 Message: Advanced graphics data unavailable in console for root. Audio: Device-1: sunxi-tdmhdmi driver: sunxi_daudio v: kernel bus ID: N/A chip ID: allwinner:audiohdmi Device-2: sunxi-hdmi driver: hdmi bus ID: N/A chip ID: allwinner:hdmi Device-3: sunxi-codec-machine driver: sunxi_codec_machine bus ID: N/A chip ID: allwinner:sndcodec Device-4: sunxi-hdmi-machine driver: sndhdmi v: kernel bus ID: N/A chip ID: allwinner:sndhdmi Sound Server: ALSA v: k3.10.107-BPI-M2U-Kernel Network: Device-1: sunxi-gmac driver: sunxi_gmac v: kernel port: N/A bus ID: N/A chip ID: allwinner:gmac0 IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: scope: global broadcast: IP v6: scope: link IP v6: scope: link Device-2: sunxi-wlan driver: sunxi_wlan v: N/A bus ID: N/A chip ID: allwinner:wlan IF: wlan0 state: dormant mac: IP v6: scope: link IF-ID-1: dummy0 state: unknown speed: N/A duplex: N/A mac: IP v6: scope: link IP v6: scope: link IF-ID-2: sit0 state: down mac: IF-ID-3: tunl0 state: down mac: WAN IP: Drives: Local Storage: total: 89.35 GiB used: 12.40 GiB (13.9%) ID-1: /dev/mmcblk0 model: SE32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda vendor: Transcend model: TS64GSSD340K size: 59.63 GiB block size: physical: 512 B logical: 512 B speed: 3.0 Gb/s rev: SVN1 scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 59.63 GiB size: 58.44 GiB (98.01%) used: 12.27 GiB (21.0%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: rootfs uuid: 6e78ddff-1915-4eb5-b253-eda8e2b37a9d ID-2: /boot raw size: 256.0 MiB size: 255.7 MiB (99.89%) used: 133.0 MiB (52.0%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: BPI-BOOT uuid: 2422-D24D ID-3: /home//domoticz/backups raw size: N/A size: 10.47 TiB used: 3.45 TiB (33.0%) fs: nfs remote: 192.168.X.X:/volume1/pi label: N/A uuid: N/A Unmounted: ID-1: /dev/mmcblk0p2 size: 29.38 GiB fs: ext4 label: BPI-ROOT uuid: 65dc8130-2791-42ad-9038-266d329d083c USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 1a40:0101 Hub: 2-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001 Hub: 4-0:1 info: Full speed (or root) Hub ports: 1 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi 2: deb http: //raspbian.raspberrypi.org/raspbian/ jessie main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ stretch main ui Processes: CPU top: 5 1: cpu: 2.8% command: domoticz pid: 11382 mem: 30.8 MiB (3.0%) 2: cpu: 0.5% command: init pid: 1 mem: 4.51 MiB (0.4%) 3: cpu: 0.4% command: [kworker/0:0] pid: 9257 mem: 0.00 MiB (0.0%) 4: cpu: 0.3% command: [kswapd0] pid: 688 mem: 0.00 MiB (0.0%) 5: cpu: 0.3% command: systemd-journald pid: 1264 mem: 4.36 MiB (0.4%) Memory top: 5 1: mem: 30.8 MiB (3.0%) command: domoticz pid: 11382 cpu: 2.8% 2: mem: 7.54 MiB (0.7%) command: check_device_online.py started by: python pid: 11551 cpu: 0.1% 3: mem: 7.54 MiB (0.7%) command: check_device_online.py started by: python pid: 11573 cpu: 0.1% 4: mem: 6.36 MiB (0.6%) command: packagekitd pid: 5214 cpu: 0.0% 5: mem: 5.25 MiB (0.5%) command: smbd pid: 3067 cpu: 0.0% Info: Processes: 152 Uptime: 20m Init: systemd v: 232 runlevel: 3 target: multi-user.target Compilers: gcc: 6.3.0 alt: 6 Client: shell wrapper v: 4.4.12-release inxi: 3.0.37

inxi Results

System:    Host: bpi-m2 Kernel: 3.10.107-BPI-M2U-Kernel armv7l bits: 32 compiler: gcc v: 5.4.0 
           parameters: board=bpi-m2u console=earlyprintk=sunxi-uart,0x01c28000 console=tty1 
           console=ttyS0,115200n8 no_console_suspend consoleblank=0 root=/dev/sda1 rootfstype=ext4 
           rw rootwait bootmenutimeout=10 datadev=sda1 service=linux bpiuser=720p enforcing=1 
           initcall_debug=0 loglevel=4 init=/init cma=256M panic=10 disp.screen0_output_type=3 
           disp.screen0_output_mode=5 disp.screen1_output_type=3 disp.screen1_output_mode=5 
           androidboot.serialno=94407872c61814220acf 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 9 (stretch) 
Machine:   Type: ARM Device System: sun8iw11p1 rev: N/A N/A 
Memory:    RAM: total: 998.6 MiB used: 156.6 MiB (15.7%) 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant-1: armv7 variant-2: sunxi bits: 32 
           type: MCP arch: v7l family: 7 model-id: N/A stepping: 5 microcode: N/A bogomips: 228 
           Speed: 1200 MHz min/max: 480/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 
           4: 1200 
           Features: edsp fastmult half idiva idivt neon swp thumb tls vfp vfpd32 vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: sun50i-disp driver: disp v: kernel bus ID: N/A chip ID: allwinner:disp 
           Device-2: sunxi-hdmi driver: hdmi v: N/A bus ID: N/A chip ID: allwinner:hdmi 
           Device-3: mali-400 driver: N/A bus ID: N/A chip ID: arm:gpu_mali400_0 
           Display: server: X.org 1.19.2 driver: fbturbo tty: 80x24 
           Message: Advanced graphics data unavailable in console for root. 
Audio:     Device-1: sunxi-tdmhdmi driver: sunxi_daudio v: kernel bus ID: N/A 
           chip ID: allwinner:audiohdmi 
           Device-2: sunxi-hdmi driver: hdmi bus ID: N/A chip ID: allwinner:hdmi 
           Device-3: sunxi-codec-machine driver: sunxi_codec_machine bus ID: N/A 
           chip ID: allwinner:sndcodec 
           Device-4: sunxi-hdmi-machine driver: sndhdmi v: kernel bus ID: N/A 
           chip ID: allwinner:sndhdmi 
           Sound Server: ALSA v: k3.10.107-BPI-M2U-Kernel 
Network:   Device-1: sunxi-gmac driver: sunxi_gmac v: kernel port: N/A bus ID: N/A 
           chip ID: allwinner:gmac0 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IP v6:  scope: link 
           Device-2: sunxi-wlan driver: sunxi_wlan v: N/A bus ID: N/A chip ID: allwinner:wlan 
           IF: wlan0 state: dormant mac:  
           IP v6:  scope: link 
           IF-ID-1: dummy0 state: unknown speed: N/A duplex: N/A mac:  
           IP v6:  scope: link 
           IP v6:  scope: link 
           IF-ID-2: sit0 state: down mac:  
           IF-ID-3: tunl0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 89.35 GiB used: 12.40 GiB (13.9%) 
           ID-1: /dev/mmcblk0 model: SE32G size: 29.72 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           ID-2: /dev/sda vendor: Transcend model: TS64GSSD340K size: 59.63 GiB block size: 
           physical: 512 B logical: 512 B speed: 3.0 Gb/s rev: SVN1 scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 59.63 GiB size: 58.44 GiB (98.01%) used: 12.27 GiB (21.0%) fs: ext4 
           block size: 4096 B dev: /dev/sda1 label: rootfs 
           uuid: 6e78ddff-1915-4eb5-b253-eda8e2b37a9d 
           ID-2: /boot raw size: 256.0 MiB size: 255.7 MiB (99.89%) used: 133.0 MiB (52.0%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: BPI-BOOT uuid: 2422-D24D 
           ID-3: /home//domoticz/backups raw size: N/A size: 10.47 TiB 
           used: 3.45 TiB (33.0%) fs: nfs remote: 192.168.X.X:/volume1/pi label: N/A uuid: N/A 
Unmounted: ID-1: /dev/mmcblk0p2 size: 29.38 GiB fs: ext4 label: BPI-ROOT 
           uuid: 65dc8130-2791-42ad-9038-266d329d083c 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 1a40:0101 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 1.1 speed: 12 Mb/s 
           chip ID: 1d6b:0001 
           Hub: 4-0:1 info: Full speed (or root) Hub ports: 1 rev: 1.1 speed: 12 Mb/s 
           chip ID: 1d6b:0001 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi
           2: deb http: //raspbian.raspberrypi.org/raspbian/ jessie main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ stretch main ui
Processes: CPU top: 5 
           1: cpu: 2.8% command: domoticz pid: 11382 mem: 30.8 MiB (3.0%) 
           2: cpu: 0.5% command: init pid: 1 mem: 4.51 MiB (0.4%) 
           3: cpu: 0.4% command: [kworker/0:0] pid: 9257 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.3% command: [kswapd0] pid: 688 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.3% command: systemd-journald pid: 1264 mem: 4.36 MiB (0.4%) 
           Memory top: 5 
           1: mem: 30.8 MiB (3.0%) command: domoticz pid: 11382 cpu: 2.8% 
           2: mem: 7.54 MiB (0.7%) command: check_device_online.py started by: python pid: 11551 
           cpu: 0.1% 
           3: mem: 7.54 MiB (0.7%) command: check_device_online.py started by: python pid: 11573 
           cpu: 0.1% 
           4: mem: 6.36 MiB (0.6%) command: packagekitd pid: 5214 cpu: 0.0% 
           5: mem: 5.25 MiB (0.5%) command: smbd pid: 3067 cpu: 0.0% 
Info:      Processes: 152 Uptime: 20m Init: systemd v: 232 runlevel: 3 target: multi-user.target 
           Compilers: gcc: 6.3.0 alt: 6 Client: shell wrapper v: 4.4.12-release inxi: 3.0.37

Benchmark #6345 - Brand: Transcend SSD300 Series