Benchmark #63855 - pibenchmarks.com

Brand: Samsung SD EVO+ (EB1QT)
C10 U1
#5 / 1,359
799
#1,069 / 1,359
#33 / 327
1,075
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2022-10-30 04:47:03
#63,855
1,059
-16 (-1.51%)
Anonymous
sd

Secure Digital (SD) Card Details
Samsung SD EVO+ (EB1QT)
C10 U1
29.5G
SD
Samsung
EB1QT
SD
6.00
0x1b
SM
3.0
01/2020
Class 10
None
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
N/A
4
1,500
500
4 GB
1,600
42 (-9)

Operating System

Debian GNU/Linux 11 (bullseye)
aarch64

Benchmark Results
11.8 MB/s
39.67 MB/s
39.35 MB/s
271 IOPS
3,183 IOPS
1,084 KB/s
12,734 KB/s
11,220 KB/s
2,623 KB/s
11,477 KB/s
1,952 KB/s

inxi Results
System: Kernel: 5.10.0-19-arm64 arch: aarch64 bits: 64 compiler: gcc v: 10.2.1 parameters: dma.dmachans=0x37f5 bcm2709.boardrev=0xc03114 bcm2709.serial=0x495297ea bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty0 console=ttyS1,115200 root=/dev/mmcblk1p2 rw fsck.repair=yes net.ifnames=0 rootwait Console: N/A Distro: Debian GNU/Linux 11 (bullseye) Machine: Type: ARM System: Raspberry Pi 4 Model B Rev 1.4 details: N/A Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.7 GiB used: 1.69 GiB (45.6%) RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 Topology: cpus: 1x cores: 4 smt: cache: L1: 320 KiB desc: d-4x32 KiB! i-4x48 KiB L2: 1024 KiB desc: 1x1024 KiB Speed (MHz): avg: 1200 min/max: 600/1500 scaling: driver: cpufreq-dt governor: schedutil cores: 1: 1200 2: 1200 3: 1200 4: 1200 bogomips: 432 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: mmio_stale_data status: Not affected Type: retbleed status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: No display server data found. Headless machine? tty: 80x40 Message: Unable to show GL data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Sound API: ALSA v: k5.10.0-19-arm64 running: yes Network: Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: down mac: Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: hassio state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v4: type: noprefixroute scope: global broadcast: Message: Output throttled. IPs: 3! Limit: 10! Override: --limit [1-x!-1 all] IF-ID-3: veth34ffe4d state: up speed: 10000 Mbps duplex: full mac: IF-ID-4: veth60799e0 state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: veth87ebce1 state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: veth9cf67a1 state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: vetha3d7b42 state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: vetha432f66 state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: vethaa7935e state: up speed: 10000 Mbps duplex: full mac: IF-ID-10: vethaf486c5 state: up speed: 10000 Mbps duplex: full mac: IF-ID-11: vethfebc172 state: up speed: 10000 Mbps duplex: full mac: IF-ID-12: wlan0 state: up mac: Message: Output throttled. IPs: 2! Limit: 10! Override: --limit [1-x!-1 all] WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: N/A rfk-block: hardware: no software: no address: see --recommends Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial Report: This feature requires one of these tools: hciconfig/bt-adapter Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 29.81 GiB used: 16.64 GiB (55.8%) ID-1: /dev/mmcblk1 maj-min: 179:0 vendor: Samsung model: EB1QT size: 29.81 GiB block-size: physical: 512 B logical: 512 B type: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. Message: No optical or floppy data found. Partition: ID-1: / raw-size: 29.52 GiB size: 29.05 GiB (98.40%) used: 16.51 GiB (56.9%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk1p2 maj-min: 179:2 label: RASPIROOT uuid: 899ea962-703a-49b8-926a-33b14329c638 ID-2: /boot/firmware raw-size: 296 MiB size: 295.8 MiB (99.93%) used: 127.6 MiB (43.1%) fs: vfat block-size: 512 B dev: /dev/mmcblk1p1 maj-min: 179:1 label: RASPIFIRM uuid: 7F54-1442 Swap: Alert: No swap data was found. Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.3:3 info: Texas Instruments CC2531 ZigBee type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 50mA chip-ID: 0451:16a8 class-ID: 0a00 Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Sensors: System Temperatures: cpu: 37.5 C mobo: N/A Fan Speeds (RPM): N/A Repos: Packages: 631 pm: dpkg pkgs: 625 libs: 349 tools: apt,apt-get pm: snap pkgs: 6 Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian bullseye main contrib non-free 2: deb http: //security.debian.org/debian-security bullseye-security main contrib non-free Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=arm64 signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https: //download.docker.com/linux/debian bullseye stable Active apt repos in: /etc/apt/sources.list.d/ookla_speedtest-cli.list 1: deb https: //packagecloud.io/ookla/speedtest-cli/debian/ bullseye main 2: deb-src https: //packagecloud.io/ookla/speedtest-cli/debian/ bullseye main Processes: CPU top: 5 of 260 1: cpu: 7.3% command: systemd-timesyncd pid: 1871682 mem: 5.84 MiB (0.1%) 2: cpu: 1.4% command: python3 pid: 5429 mem: 469.0 MiB (12.3%) 3: cpu: 0.9% command: python3 pid: 6279 mem: 41.6 MiB (1.0%) 4: cpu: 0.7% command: python3 pid: 3512 mem: 167.5 MiB (4.4%) 5: cpu: 0.6% command: pulseaudio pid: 5218 mem: 21.1 MiB (0.5%) Memory top: 5 of 260 1: mem: 469.0 MiB (12.3%) command: python3 pid: 5429 cpu: 1.4% 2: mem: 232.9 MiB (6.1%) command: systemd-journald pid: 228 cpu: 0.3% 3: mem: 167.5 MiB (4.4%) command: python3 pid: 3512 cpu: 0.7% 4: mem: 97.4 MiB (2.5%) command: node pid: 10092 cpu: 0.0% 5: mem: 93.4 MiB (2.4%) command: puma pid: 594 cpu: 0.0% Info: Processes: 260 Uptime: 1d 23h 12m Init: systemd v: 247 default: graphical tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.22

inxi Results

System:
  Kernel: 5.10.0-19-arm64 arch: aarch64 bits: 64 compiler: gcc v: 10.2.1 parameters:
    dma.dmachans=0x37f5 bcm2709.boardrev=0xc03114 bcm2709.serial=0x495297ea
    bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0
    smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000
    console=tty0 console=ttyS1,115200 root=/dev/mmcblk1p2 rw fsck.repair=yes net.ifnames=0
    rootwait
  Console: N/A Distro: Debian GNU/Linux 11 (bullseye)
Machine:
  Type: ARM System: Raspberry Pi 4 Model B Rev 1.4 details: N/A Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 3.7 GiB used: 1.69 GiB (45.6%)
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0
    stepping: 3
  Topology: cpus: 1x cores: 4 smt:  cache: L1: 320 KiB desc: d-4x32 KiB! i-4x48 KiB
    L2: 1024 KiB desc: 1x1024 KiB
  Speed (MHz): avg: 1200 min/max: 600/1500 scaling: driver: cpufreq-dt governor: schedutil
    cores: 1: 1200 2: 1200 3: 1200 4: 1200 bogomips: 432
  Features: asimd cpuid crc32 evtstrm fp
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 status: Vulnerable
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700
    class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700
    class-ID: hdmi
  Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu
  Display: server: No display server data found. Headless machine? tty: 80x40
  Message: Unable to show GL data. Required tool glxinfo missing.
Audio:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi
  Sound API: ALSA v: k5.10.0-19-arm64 running: yes
Network:
  Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000
    class-ID: ethernet
  IF: eth0 state: down mac: 
  Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A
    chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq
  IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown mac: 
  IP v4:  scope: global broadcast: 
  IP v4:  type: noprefixroute scope: global broadcast: 
  IP v6:  scope: link
  IF-ID-2: hassio state: up speed: 10000 Mbps duplex: unknown mac: 
  IP v4:  scope: global broadcast: 
  IP v4:  type: noprefixroute scope: global broadcast: 
  Message: Output throttled. IPs: 3! Limit: 10! Override: --limit [1-x!-1 all]
  IF-ID-3: veth34ffe4d state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-4: veth60799e0 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-5: veth87ebce1 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-6: veth9cf67a1 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-7: vetha3d7b42 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-8: vetha432f66 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-9: vethaa7935e state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-10: vethaf486c5 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-11: vethfebc172 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-12: wlan0 state: up mac: 
  Message: Output throttled. IPs: 2! Limit: 10! Override: --limit [1-x!-1 all]
  WAN IP: 
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
  Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: N/A rfk-block: hardware: no
    software: no address: see --recommends
  Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial
  Report: This feature requires one of these tools: hciconfig/bt-adapter
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 29.81 GiB used: 16.64 GiB (55.8%)
  ID-1: /dev/mmcblk1 maj-min: 179:0 vendor: Samsung model: EB1QT size: 29.81 GiB block-size:
    physical: 512 B logical: 512 B type: SSD scheme: MBR
  SMART Message: Unknown smartctl error. Unable to generate data.
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 29.52 GiB size: 29.05 GiB (98.40%) used: 16.51 GiB (56.9%) fs: ext4
    block-size: 4096 B dev: /dev/mmcblk1p2 maj-min: 179:2 label: RASPIROOT
    uuid: 899ea962-703a-49b8-926a-33b14329c638
  ID-2: /boot/firmware raw-size: 296 MiB size: 295.8 MiB (99.93%) used: 127.6 MiB (43.1%)
    fs: vfat block-size: 512 B dev: /dev/mmcblk1p1 maj-min: 179:1 label: RASPIFIRM uuid: 7F54-1442
Swap:
  Alert: No swap data was found.
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA
    chip-ID: 2109:3431 class-ID: 0900
  Device-1: 1-1.3:3 info: Texas Instruments CC2531 ZigBee type: Abstract (modem),CDC-Data
    driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 50mA chip-ID: 0451:16a8
    class-ID: 0a00 Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003
    class-ID: 0900
Sensors:
  System Temperatures: cpu: 37.5 C mobo: N/A
  Fan Speeds (RPM): N/A
Repos:
  Packages: 631 pm: dpkg pkgs: 625 libs: 349 tools: apt,apt-get pm: snap pkgs: 6
  Active apt repos in: /etc/apt/sources.list
    1: deb http: //deb.debian.org/debian bullseye main contrib non-free
    2: deb http: //security.debian.org/debian-security bullseye-security main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/docker.list
    1: deb [arch=arm64 signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https: //download.docker.com/linux/debian bullseye stable
  Active apt repos in: /etc/apt/sources.list.d/ookla_speedtest-cli.list
    1: deb https: //packagecloud.io/ookla/speedtest-cli/debian/ bullseye main
    2: deb-src https: //packagecloud.io/ookla/speedtest-cli/debian/ bullseye main
Processes:
  CPU top: 5 of 260
  1: cpu: 7.3% command: systemd-timesyncd pid: 1871682 mem: 5.84 MiB (0.1%)
  2: cpu: 1.4% command: python3 pid: 5429 mem: 469.0 MiB (12.3%)
  3: cpu: 0.9% command: python3 pid: 6279 mem: 41.6 MiB (1.0%)
  4: cpu: 0.7% command: python3 pid: 3512 mem: 167.5 MiB (4.4%)
  5: cpu: 0.6% command: pulseaudio pid: 5218 mem: 21.1 MiB (0.5%)
  Memory top: 5 of 260
  1: mem: 469.0 MiB (12.3%) command: python3 pid: 5429 cpu: 1.4%
  2: mem: 232.9 MiB (6.1%) command: systemd-journald pid: 228 cpu: 0.3%
  3: mem: 167.5 MiB (4.4%) command: python3 pid: 3512 cpu: 0.7%
  4: mem: 97.4 MiB (2.5%) command: node pid: 10092 cpu: 0.0%
  5: mem: 93.4 MiB (2.4%) command: puma pid: 594 cpu: 0.0%
Info:
  Processes: 260 Uptime: 1d 23h 12m Init: systemd v: 247 default: graphical tool: systemctl
  Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.22

Benchmark #63855 - Brand: Samsung SD EVO+ (EB1QT)