Benchmark #6400 - pibenchmarks.com

Brand: Samsung 850 EVO mSATA
SSD (mSATA)
#265 / 1,672
51
#401 / 1,672
#389 / 983
#4 / 69
7,750
	Amazon.com Amazon.ca Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.sg

Overview
2020-01-06 10:47:35
#6,400
9,285
+1,535 (+16.53%)
Anonymous

Storage Details
Samsung 850 EVO mSATA
SSD (mSATA)
120G
SSD
Samsung
SSD850EVOmSATA120GB
SATA
3.00
5,000
1d6b:0229
0x1d6b (Linux Foundation)
0x0229
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,600 (+100)
600 (+100)
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
183 MB/s
294.7 MB/s
285.19 MB/s
12,315 IOPS
23,141 IOPS
49,260 KB/s
92,564 KB/s
36,886 KB/s
31,571 KB/s
22,135 KB/s
36,842 KB/s

inxi Results
System: Host: raspberrypi Kernel: 4.19.89-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 console=tty1 root=PARTUUID=5d603929-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.88 GiB used: 244.9 MiB (6.2%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 864 Speed: 800 MHz min/max: 400/1600 MHz Core speeds (MHz): 1: 800 2: 800 3: 800 4: 800 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 246x48 Message: Advanced graphics data unavailable in console for root. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.89-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: br-fbc4367cb8ea state: up speed: N/A duplex: N/A mac: XX:XX:XX:XX:XX:XX IP v4: 172.18.X.X/16 scope: global broadcast: 172.18.X.X IF-ID-2: docker0 state: up speed: N/A duplex: N/A mac: XX:XX:XX:XX:XX:XX IP v4: 172.17.X.X/16 scope: global broadcast: 172.17.X.X IF-ID-3: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IF-ID-4: veth50e7b59 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-5: veth5e31f63 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX WAN IP: 109.250.X.X Drives: Local Storage: total: 113.68 GiB used: 28.88 GiB (25.4%) ID-1: /dev/mmcblk0 model: N/A size: 1.89 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: Samsung model: SSD 850 EVO mSAT size: 111.79 GiB block size: physical: 4096 B logical: 512 B rev: EMT4 scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 106.07 GiB size: 104.45 GiB (98.47%) used: 14.44 GiB (13.8%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 ID-2: /var/lib/docker/overlay2/794b301e2ffefe11ccf0f1a8b72302425cd6f43b3553e0bf2f6ea69b7b483651/merged raw size: N/A size: 104.45 GiB used: 14.44 GiB (13.8%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-3: /var/lib/docker/overlay2/fea775710bb26c024cc3cbdf814c95827e21b2f9291132b844cc095c9b345f51/merged raw size: N/A size: 104.45 GiB used: 14.44 GiB (13.8%) fs: overlay source: ERR-102 label: N/A uuid: N/A Unmounted: ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: boot uuid: B11E-9EF0 ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: F661-303B USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: Hitachi mSATA Adapter [renkforce Pi-102] type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 045b:0229 Sensors: Message: No sensors data was found. Is sensors configured? Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https://download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 2.7% command: [kworker/u8:0-events_unbound] pid: 2069 mem: 0.00 MiB (0.0%) 2: cpu: 0.9% command: init pid: 1 mem: 7.76 MiB (0.1%) 3: cpu: 0.6% command: ksh pid: 1883 mem: 3.05 MiB (0.0%) 4: cpu: 0.4% command: containerd pid: 507 mem: 32.1 MiB (0.8%) 5: cpu: 0.4% command: dockerd pid: 510 mem: 60.4 MiB (1.5%) Memory top: 5 1: mem: 60.4 MiB (1.5%) command: dockerd pid: 510 cpu: 0.4% 2: mem: 43.1 MiB (1.0%) command: mysqld pid: 1136 cpu: 0.2% 3: mem: 32.1 MiB (0.8%) command: containerd pid: 507 cpu: 0.4% 4: mem: 15.7 MiB (0.3%) command: smbd pid: 693 cpu: 0.0% 5: mem: 14.6 MiB (0.3%) command: /portainer pid: 1128 cpu: 0.1% Info: Processes: 117 Uptime: 8m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Shell: ksh (sudo) inxi: 3.0.37

inxi Results

System:    Host: raspberrypi Kernel: 4.19.89-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 console=tty1 root=PARTUUID=5d603929-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
Memory:    RAM: total: 3.88 GiB used: 244.9 MiB (6.2%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A 
           stepping: 3 microcode: N/A bogomips: 864 
           Speed: 800 MHz min/max: 400/1600 MHz Core speeds (MHz): 1: 800 2: 800 3: 800 4: 800 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 246x48 
           Message: Advanced graphics data unavailable in console for root. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.89-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: br-fbc4367cb8ea state: up speed: N/A duplex: N/A mac: XX:XX:XX:XX:XX:XX 
           IP v4: 172.18.X.X/16 scope: global broadcast: 172.18.X.X 
           IF-ID-2: docker0 state: up speed: N/A duplex: N/A mac: XX:XX:XX:XX:XX:XX 
           IP v4: 172.17.X.X/16 scope: global broadcast: 172.17.X.X 
           IF-ID-3: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X 
           IF-ID-4: veth50e7b59 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IF-ID-5: veth5e31f63 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           WAN IP: 109.250.X.X 
Drives:    Local Storage: total: 113.68 GiB used: 28.88 GiB (25.4%) 
           ID-1: /dev/mmcblk0 model: N/A size: 1.89 GiB block size: physical: 512 B logical: 512 B 
           scheme: MBR 
           ID-2: /dev/sda type: USB vendor: Samsung model: SSD 850 EVO mSAT size: 111.79 GiB block size: physical: 4096 B 
           logical: 512 B rev: EMT4 scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 106.07 GiB size: 104.45 GiB (98.47%) used: 14.44 GiB (13.8%) fs: ext4 block size: 4096 B 
           dev: /dev/sda2 label: rootfs uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 
           ID-2: /var/lib/docker/overlay2/794b301e2ffefe11ccf0f1a8b72302425cd6f43b3553e0bf2f6ea69b7b483651/merged 
           raw size: N/A size: 104.45 GiB used: 14.44 GiB (13.8%) fs: overlay source: ERR-102 label: N/A uuid: N/A 
           ID-3: /var/lib/docker/overlay2/fea775710bb26c024cc3cbdf814c95827e21b2f9291132b844cc095c9b345f51/merged 
           raw size: N/A size: 104.45 GiB used: 14.44 GiB (13.8%) fs: overlay source: ERR-102 label: N/A uuid: N/A 
Unmounted: ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: boot uuid: B11E-9EF0 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: F661-303B 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: Hitachi mSATA Adapter [renkforce Pi-102] type: Mass Storage driver: uas interfaces: 1 
           rev: 3.0 speed: 5 Gb/s chip ID: 045b:0229 
Sensors:   Message: No sensors data was found. Is sensors configured? 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https://download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 2.7% command: [kworker/u8:0-events_unbound] pid: 2069 mem: 0.00 MiB (0.0%) 
           2: cpu: 0.9% command: init pid: 1 mem: 7.76 MiB (0.1%) 
           3: cpu: 0.6% command: ksh pid: 1883 mem: 3.05 MiB (0.0%) 
           4: cpu: 0.4% command: containerd pid: 507 mem: 32.1 MiB (0.8%) 
           5: cpu: 0.4% command: dockerd pid: 510 mem: 60.4 MiB (1.5%) 
           Memory top: 5 
           1: mem: 60.4 MiB (1.5%) command: dockerd pid: 510 cpu: 0.4% 
           2: mem: 43.1 MiB (1.0%) command: mysqld pid: 1136 cpu: 0.2% 
           3: mem: 32.1 MiB (0.8%) command: containerd pid: 507 cpu: 0.4% 
           4: mem: 15.7 MiB (0.3%) command: smbd pid: 693 cpu: 0.0% 
           5: mem: 14.6 MiB (0.3%) command: /portainer pid: 1128 cpu: 0.1% 
Info:      Processes: 117 Uptime: 8m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 
           Shell: ksh (sudo) inxi: 3.0.37

Benchmark #6400 - Brand: Samsung 850 EVO mSATA