Benchmark #64000 - pibenchmarks.com

Brand: Lexar USB Flash Drive
USB Flash
#234 / 1,672
60
#1,241 / 1,672
#21 / 93
#23 / 89
1,332
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.com.au Amazon.de Amazon.es Amazon.pl Amazon.sg

Overview
2022-11-06 06:37:59
#64,000
312
-1,020 (-326.92%)
Anonymous
Lexar 64GB USB Raspberry Pi 3B 1.2

Storage Details
Lexar USB Flash Drive
USB Flash
59.3G
USB Flash
Lexar
USBFlashDrive
2.10
480
05dc:a838
0x05dc (Lexar Media, Inc.)
0xa838 (JumpDrive Tough)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B 1.2
Raspberry Pi 3 Model B Rev 1.2
Raspberry Pi Foundation
N/A
4
1,200
907 MB
450

Operating System

Debian GNU/Linux 11 (bullseye)
aarch64

Benchmark Results
8.1 MB/s
27.02 MB/s
25.93 MB/s
83 IOPS
535 IOPS
335 KB/s
2,143 KB/s
6,349 KB/s
2,684 KB/s
2,019 KB/s
294 KB/s

inxi Results
System: Kernel: 5.10.0-18-arm64 arch: aarch64 bits: 64 compiler: gcc v: 10.2.1 parameters: video=HDMI-A-1:1680x1050M@60 dma.dmachans=0x7ff5 bcm2709.boardrev=0xa02082 bcm2709.serial=0xc6165add bcm2709.uart_clock=48000000 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty0 console=ttyS1,115200 root=/dev/sda2 rw fsck.repair=yes net.ifnames=0 cma=64M rootwait Console: pty pts/0 Distro: Debian GNU/Linux 11 (bullseye) Machine: Type: ARM System: Raspberry Pi 3 Model B Rev 1.2 details: N/A Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 906.4 MiB used: 208.4 MiB (23.0%) RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a53 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 4 Topology: cpus: 1x cores: 4 smt: cache: L1: 256 KiB desc: d-4x32 KiB! i-4x32 KiB L2: 512 KiB desc: 1x512 KiB Speed (MHz): avg: 1200 min/max: 600/1200 scaling: driver: cpufreq-dt governor: schedutil cores: 1: 1200 2: 1200 3: 1200 4: 1200 bogomips: N/A Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: mmio_stale_data status: Not affected Type: retbleed status: Not affected Type: spec_store_bypass status: Not affected Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Not affected Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2835-hdmi driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:3f902000 class-ID: hdmi Device-2: bcm2835-vc4 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: gpu Display: server: No display server data found. Headless machine? tty: 80x40 API: N/A Message: No display API data available in console. Headless machine? Audio: Device-1: bcm2835-hdmi driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:3f902000 class-ID: hdmi Sound API: ALSA v: k5.10.0-18-arm64 running: yes Network: Device-1: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq Device-2: Microchip (formerly SMSC) SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus-ID: 1-1.1:3 chip-ID: 0424:ec00 class-ID: ff00 IF: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: type: dynamic scope: global broadcast: IP v6: scope: link IF-ID-1: wg0 state: unknown speed: N/A duplex: N/A mac: N/A IP v4: scope: global IF-ID-2: wlan0 state: down mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:3f201000 class-ID: serial Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: hardware: no software: no address: see --recommends Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial Report: This feature requires one of these tools: hciconfig/bt-adapter Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 59.62 GiB used: 4.65 GiB (7.8%) ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Lexar model: USB Flash Drive size: 59.62 GiB block-size: physical: 512 B logical: 512 B type: SSD rev: 1100 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No optical or floppy data found. Partition: ID-1: / raw-size: 59.33 GiB size: 58.42 GiB (98.46%) used: 4.52 GiB (7.7%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT uuid: cd9c34e5-388a-48d7-a252-83457c78be48 ID-2: /boot/firmware raw-size: 296 MiB size: 295.8 MiB (99.94%) used: 125.8 MiB (42.5%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: 2E20-B0C6 Swap: Alert: No swap data was found. Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: Microchip (formerly SMSC) SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 0424:9514 class-ID: 0900 Device-1: 1-1.1:3 info: Microchip (formerly SMSC) SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 2mA chip-ID: 0424:ec00 class-ID: ff00 Device-2: 1-1.5:4 info: Lexar Media JumpDrive Tough type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 500mA chip-ID: 05dc:a838 class-ID: 0806 Sensors: Src: /sys System Temperatures: cpu: 51.0 C mobo: N/A Fan Speeds (RPM): N/A Repos: Packages: pm: dpkg pkgs: 394 libs: 219 tools: apt,apt-get,aptitude Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian bullseye main contrib non-free 2: deb http: //security.debian.org/debian-security bullseye-security main contrib non-free 3: deb http: //deb.debian.org/debian/ bullseye-backports main contrib non-free Processes: CPU top: 5 of 127 1: cpu: 2.9% command: [kworker/1:2-mm_percpu_wq] pid: 131 mem: 0.00 MiB (0.0%) 2: cpu: 1.2% command: [kworker/1:1-events_freezable] pid: 2869 mem: 0.00 MiB (0.0%) 3: cpu: 0.1% command: sudo pid: 1788 mem: 4.04 MiB (0.4%) 4: cpu: 0.0% command: init pid: 1 mem: 9.70 MiB (1.0%) 5: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) Memory top: 5 of 127 1: mem: 20.9 MiB (2.3%) command: fail2ban-server started by: python3 pid: 633 cpu: 0.0% 2: mem: 19.3 MiB (2.1%) command: unattended-upgrade-shutdown started by: python3 pid: 630 cpu: 0.0% 3: mem: 13.9 MiB (1.5%) command: systemd-journald pid: 223 cpu: 0.0% 4: mem: 10.7 MiB (1.1%) command: systemd-resolved pid: 489 cpu: 0.0% 5: mem: 9.70 MiB (1.0%) command: init pid: 1 cpu: 0.0% Info: Processes: 127 Uptime: 11h 25m Init: systemd v: 247 target: graphical (5) default: graphical tool: systemctl Compilers: gcc: N/A Client: shell wrapper v: 5.1.4-release inxi: 3.3.23

inxi Results

System:
  Kernel: 5.10.0-18-arm64 arch: aarch64 bits: 64 compiler: gcc v: 10.2.1
    parameters: video=HDMI-A-1:1680x1050M@60 dma.dmachans=0x7ff5 bcm2709.boardrev=0xa02082
    bcm2709.serial=0xc6165add bcm2709.uart_clock=48000000 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX
    vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty0 console=ttyS1,115200
    root=/dev/sda2 rw fsck.repair=yes net.ifnames=0 cma=64M rootwait
  Console: pty pts/0 Distro: Debian GNU/Linux 11 (bullseye)
Machine:
  Type: ARM System: Raspberry Pi 3 Model B Rev 1.2 details: N/A Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 906.4 MiB used: 208.4 MiB (23.0%)
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a53 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0
    stepping: 4
  Topology: cpus: 1x cores: 4 smt:  cache: L1: 256 KiB desc: d-4x32 KiB! i-4x32 KiB
    L2: 512 KiB desc: 1x512 KiB
  Speed (MHz): avg: 1200 min/max: 600/1200 scaling: driver: cpufreq-dt governor: schedutil cores:
    1: 1200 2: 1200 3: 1200 4: 1200 bogomips: N/A
  Features: asimd cpuid crc32 evtstrm fp
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed status: Not affected
  Type: spec_store_bypass status: Not affected
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 status: Not affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2835-hdmi driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:3f902000 class-ID: hdmi
  Device-2: bcm2835-vc4 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: gpu
  Display: server: No display server data found. Headless machine? tty: 80x40
  API: N/A Message: No display API data available in console. Headless machine?
Audio:
  Device-1: bcm2835-hdmi driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:3f902000 class-ID: hdmi
  Sound API: ALSA v: k5.10.0-18-arm64 running: yes
Network:
  Device-1: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A
    chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq
  Device-2: Microchip (formerly SMSC) SMSC9512/9514 Fast Ethernet Adapter type: USB
    driver: smsc95xx bus-ID: 1-1.1:3 chip-ID: 0424:ec00 class-ID: ff00
  IF: eth0 state: up speed: 100 Mbps duplex: full mac: 
  IP v4:  type: dynamic scope: global broadcast: 
  IP v6:  scope: link
  IF-ID-1: wg0 state: unknown speed: N/A duplex: N/A mac: N/A
  IP v4:  scope: global
  IF-ID-2: wlan0 state: down mac: 
  WAN IP: 
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:3f201000 class-ID: serial
  Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: hardware: no
    software: no address: see --recommends
  Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial
  Report: This feature requires one of these tools: hciconfig/bt-adapter
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 59.62 GiB used: 4.65 GiB (7.8%)
  ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Lexar model: USB Flash Drive size: 59.62 GiB
    block-size: physical: 512 B logical: 512 B type: SSD rev: 1100 scheme: MBR
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 59.33 GiB size: 58.42 GiB (98.46%) used: 4.52 GiB (7.7%) fs: ext4
    block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT
    uuid: cd9c34e5-388a-48d7-a252-83457c78be48
  ID-2: /boot/firmware raw-size: 296 MiB size: 295.8 MiB (99.94%) used: 125.8 MiB (42.5%)
    fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: 2E20-B0C6
Swap:
  Alert: No swap data was found.
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: Microchip (formerly SMSC) SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s
    power: 2mA chip-ID: 0424:9514 class-ID: 0900
  Device-1: 1-1.1:3 info: Microchip (formerly SMSC) SMSC9512/9514 Fast Ethernet Adapter
    type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 2mA
    chip-ID: 0424:ec00 class-ID: ff00
  Device-2: 1-1.5:4 info: Lexar Media JumpDrive Tough type: Mass Storage driver: usb-storage
    interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 500mA chip-ID: 05dc:a838 class-ID: 0806
    Sensors:
  Src: /sys System Temperatures: cpu: 51.0 C mobo: N/A
  Fan Speeds (RPM): N/A
Repos:
  Packages: pm: dpkg pkgs: 394 libs: 219 tools: apt,apt-get,aptitude
  Active apt repos in: /etc/apt/sources.list
    1: deb http: //deb.debian.org/debian bullseye main contrib non-free
    2: deb http: //security.debian.org/debian-security bullseye-security main contrib non-free
    3: deb http: //deb.debian.org/debian/ bullseye-backports main contrib non-free
Processes:
  CPU top: 5 of 127
  1: cpu: 2.9% command: [kworker/1:2-mm_percpu_wq] pid: 131 mem: 0.00 MiB (0.0%)
  2: cpu: 1.2% command: [kworker/1:1-events_freezable] pid: 2869 mem: 0.00 MiB (0.0%)
  3: cpu: 0.1% command: sudo pid: 1788 mem: 4.04 MiB (0.4%)
  4: cpu: 0.0% command: init pid: 1 mem: 9.70 MiB (1.0%)
  5: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%)
  Memory top: 5 of 127
  1: mem: 20.9 MiB (2.3%) command: fail2ban-server started by: python3 pid: 633 cpu: 0.0%
  2: mem: 19.3 MiB (2.1%) command: unattended-upgrade-shutdown started by: python3 pid: 630
    cpu: 0.0%
  3: mem: 13.9 MiB (1.5%) command: systemd-journald pid: 223 cpu: 0.0%
  4: mem: 10.7 MiB (1.1%) command: systemd-resolved pid: 489 cpu: 0.0%
  5: mem: 9.70 MiB (1.0%) command: init pid: 1 cpu: 0.0%
Info:
  Processes: 127 Uptime: 11h 25m Init: systemd v: 247 target: graphical (5) default: graphical
  tool: systemctl Compilers: gcc: N/A Client: shell wrapper v: 5.1.4-release inxi: 3.3.23

Benchmark #64000 - Brand: Lexar USB Flash Drive