Benchmark #64080 - pibenchmarks.com

Brand: Samsung 980 Pro
SSD (M.2 NVMe)
#25 / 1,700
588
#140 / 1,700
#140 / 989
#132 / 284
36,388
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2022-11-09 18:32:39
#64,080
5,465
-30,923 (-565.84%)
ORICO M.2 NVMe SSD Enclosure,
Samsung 980 PRO SSD on Pi 4 using

Storage Details
Samsung 980 Pro
SSD (M.2 NVMe)
5G
SSD
Samsung
SSD980PRO500GB
3.20
5,000
0bda:9210
0x0bda (Realtek Semiconductor Corp.)
0x9210 (RTL9210 M.2 NVME Adapter)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
N/A
4
1,500
500
8 GB
1,600

Operating System

Debian GNU/Linux 11 (bullseye)
aarch64

Benchmark Results
98.2 MB/s
130.11 MB/s
165.07 MB/s
5,015 IOPS
5,823 IOPS
20,063 KB/s
23,292 KB/s
25,017 KB/s
20,647 KB/s
21,792 KB/s
23,990 KB/s

inxi Results
perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_US.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). System: Kernel: 5.10.0-19-arm64 arch: aarch64 bits: 64 compiler: gcc v: 10.2.1 parameters: dma.dmachans=0x37f5 bcm2709.boardrev=0xd03114 bcm2709.serial=0x2d0ac27d bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=tty0 console=ttyS1,115200 root=LABEL=RASPIROOT rw fsck.repair=yes net.ifnames=0 rootwait systemd.unified_cgroup_hierarchy=false Console: N/A Distro: Debian GNU/Linux 11 (bullseye) Machine: Type: ARM System: Raspberry Pi 4 Model B Rev 1.4 details: N/A Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 7.63 GiB used: 2.36 GiB (30.9%) RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 Topology: cpus: 1x cores: 4 smt: cache: L1: 320 KiB desc: d-4x32 KiB! i-4x48 KiB L2: 1024 KiB desc: 1x1024 KiB Speed (MHz): avg: 1300 min/max: 600/1500 scaling: driver: cpufreq-dt governor: schedutil cores: 1: 1300 2: 1300 3: 1300 4: 1300 bogomips: 432 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: mmio_stale_data status: Not affected Type: retbleed status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: No display server data found. Headless machine? tty: 80x40 API: N/A Message: No display API data available in console. Headless machine? Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Sound API: ALSA v: k5.10.0-19-arm64 running: yes Network: Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: noprefixroute scope: link Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: hassio state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: Message: Output throttled. IPs: 2! Limit: 10! Override: --limit [1-x!-1 all] IF-ID-3: veth02ba930 state: up speed: 10000 Mbps duplex: full mac: IF-ID-4: veth208bcdc state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: veth325477c state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: veth3c11c51 state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: veth5ce4df6 state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: veth60b8aea state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: veth83dfe54 state: up speed: 10000 Mbps duplex: full mac: IF-ID-10: veth85b920c state: up speed: 10000 Mbps duplex: full mac: IF-ID-11: veth9756e25 state: up speed: 10000 Mbps duplex: full mac: IF-ID-12: veth9aaa5ad state: up speed: 10000 Mbps duplex: full mac: IF-ID-13: vetha628773 state: up speed: 10000 Mbps duplex: full mac: IF-ID-14: vethbba61e5 state: up speed: 10000 Mbps duplex: full mac: IF-ID-15: vethd489f52 state: up speed: 10000 Mbps duplex: full mac: IF-ID-16: vethfeb2da0 state: up speed: 10000 Mbps duplex: full mac: IF-ID-17: wlan0 state: down mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: bt-v: 2.1 lmp-v: 4.1 sub-v: 6119 hci-v: 4.1 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept service-classes: rendering, capturing, audio Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 13.19 TiB used: 13.6 GiB (0.1%) ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Western Digital model: WD easystore 264D drive model: WD140EDGZ-11B1PA0 size: 12.73 TiB block-size: physical: 4096 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s type: HDD rpm: 7200 rev: 3012 drive rev: 85.00A85 temp: 26 C scheme: GPT SMART: yes state: enabled health: PASSED on: 347d 7h cycles: 89 ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: Realtek model: RTL9210 NVME size: 465.76 GiB block-size: physical: 512 B logical: 512 B type: SSD rev: 1.00 drive rev: 5B2QGXA7 temp: 35 Celsius C scheme: MBR SMART: yes health: PASSED on: 30d 15h cycles: 1,921 read-units: 13,611,792 [6.96 TB] written-units: 22,605,956 [11.5 TB] Message: No optical or floppy data found. Partition: ID-1: / raw-size: 465.37 GiB size: 458.3 GiB (98.48%) used: 13.48 GiB (2.9%) fs: ext4 block-size: 4096 B dev: /dev/sdb2 maj-min: 8:18 label: RASPIROOT uuid: d850171d-fc25-4fe3-b6ea-5fe2bca1d86b ID-2: /boot/firmware raw-size: 396 MiB size: 395.8 MiB (99.94%) used: 126 MiB (31.8%) fs: vfat block-size: 512 B dev: /dev/sdb1 maj-min: 8:17 label: RASPIFIRM uuid: A4ED-003B Swap: Alert: No swap data was found. Unmounted: ID-1: /dev/sda1 maj-min: 8:1 size: 12.73 TiB fs: ext4 label: N/A uuid: 90c968ea-6ef4-46d0-a54b-8b911e9100c6 USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.4:3 info: Sigma Designs Aeotec Z-Stick Gen5 (ZW090) - UZB type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 0658:0200 class-ID: 0a00 Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-1:2 info: Western Digital easystore 264D type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.1 speed: 5 Gb/s power: 8mA chip-ID: 1058:264d class-ID: 0806 Device-2: 2-2:3 info: Realtek RTL9210 M.2 NVME Adapter type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.2 speed: 5 Gb/s power: 896mA chip-ID: 0bda:9210 class-ID: 0806 Sensors: Src: /sys System Temperatures: cpu: 51.1 C mobo: N/A Fan Speeds (RPM): N/A Repos: Packages: pm: dpkg pkgs: 399 libs: 226 tools: apt,apt-get Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian bullseye main contrib non-free 2: deb http: //security.debian.org/debian-security bullseye-security main contrib non-free Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=arm64 signed-by=/etc/apt/keyrings/docker.gpg] https: //download.docker.com/linux/debian bullseye stable Processes: CPU top: 5 of 336 1: cpu: 19.0% command: python3 pid: 4864 mem: 632.9 MiB (8.1%) 2: cpu: 6.9% command: flask started by: python pid: 85338 mem: 28.3 MiB (0.3%) 3: cpu: 6.3% command: flask started by: python pid: 105477 mem: 31.0 MiB (0.3%) 4: cpu: 5.4% command: flask started by: python pid: 113466 mem: 26.9 MiB (0.3%) 5: cpu: 3.0% command: flask started by: python pid: 119004 mem: 25.7 MiB (0.3%) Memory top: 5 of 336 1: mem: 632.9 MiB (8.1%) command: python3 pid: 4864 cpu: 19.0% 2: mem: 151.9 MiB (1.9%) command: python3 pid: 1353 cpu: 0.2% 3: mem: 151.6 MiB (1.9%) command: node pid: 3380 cpu: 2.2% 4: mem: 91.6 MiB (1.1%) command: systemd-journald pid: 246 cpu: 0.1% 5: mem: 80.1 MiB (1.0%) command: mosquitto pid: 3282 cpu: 0.0% Info: Processes: 336 Uptime: 4h 40m Init: systemd v: 247 target: graphical (5) default: graphical tool: systemctl Compilers: gcc: N/A Client: shell wrapper v: 5.1.4-release inxi: 3.3.23

inxi Results

perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
	LANGUAGE = (unset),
	LC_ALL = (unset),
	LANG = "en_US.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
System:
  Kernel: 5.10.0-19-arm64 arch: aarch64 bits: 64 compiler: gcc v: 10.2.1 parameters:
    dma.dmachans=0x37f5 bcm2709.boardrev=0xd03114 bcm2709.serial=0x2d0ac27d
    bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0
    smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000
    console=tty0 console=ttyS1,115200 root=LABEL=RASPIROOT rw fsck.repair=yes net.ifnames=0
    rootwait systemd.unified_cgroup_hierarchy=false
  Console: N/A Distro: Debian GNU/Linux 11 (bullseye)
Machine:
  Type: ARM System: Raspberry Pi 4 Model B Rev 1.4 details: N/A Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 7.63 GiB used: 2.36 GiB (30.9%)
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0
    stepping: 3
  Topology: cpus: 1x cores: 4 smt:  cache: L1: 320 KiB desc: d-4x32 KiB! i-4x48 KiB
    L2: 1024 KiB desc: 1x1024 KiB
  Speed (MHz): avg: 1300 min/max: 600/1500 scaling: driver: cpufreq-dt governor: schedutil cores:
    1: 1300 2: 1300 3: 1300 4: 1300 bogomips: 432
  Features: asimd cpuid crc32 evtstrm fp
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 status: Vulnerable
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700
    class-ID: hdmi
  Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu
  Display: server: No display server data found. Headless machine? tty: 80x40
  API: N/A Message: No display API data available in console. Headless machine?
Audio:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi
  Sound API: ALSA v: k5.10.0-19-arm64 running: yes
Network:
  Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000
    class-ID: ethernet
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 
  IP v4:  type: dynamic noprefixroute scope: global broadcast: 
  IP v6:  type: noprefixroute scope: link
  Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A
    chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq
  IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown mac: 
  IP v4:  scope: global broadcast: 
  IP v6:  scope: link
  IF-ID-2: hassio state: up speed: 10000 Mbps duplex: unknown mac: 
  IP v4:  scope: global broadcast: 
  Message: Output throttled. IPs: 2! Limit: 10! Override: --limit [1-x!-1 all]
  IF-ID-3: veth02ba930 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-4: veth208bcdc state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-5: veth325477c state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-6: veth3c11c51 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-7: veth5ce4df6 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-8: veth60b8aea state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-9: veth83dfe54 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-10: veth85b920c state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-11: veth9756e25 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-12: veth9aaa5ad state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-13: vetha628773 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-14: vethbba61e5 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-15: vethd489f52 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-16: vethfeb2da0 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-17: wlan0 state: down mac: 
  WAN IP: 
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address:  bt-v: 2.1 lmp-v: 4.1
    sub-v: 6119 hci-v: 4.1
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept
    service-classes: rendering, capturing, audio
  Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 13.19 TiB used: 13.6 GiB (0.1%)
  ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Western Digital model: WD easystore 264D
    drive model: WD140EDGZ-11B1PA0 size: 12.73 TiB block-size: physical: 4096 B logical: 512 B
    sata: 3.2 speed: 6.0 Gb/s type: HDD rpm: 7200 rev: 3012
    drive rev: 85.00A85 temp: 26 C scheme: GPT
  SMART: yes state: enabled health: PASSED on: 347d 7h cycles: 89
  ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: Realtek model: RTL9210 NVME size: 465.76 GiB
    block-size: physical: 512 B logical: 512 B type: SSD rev: 1.00 drive rev: 5B2QGXA7 temp: 35 Celsius C scheme: MBR
  SMART: yes health: PASSED on: 30d 15h cycles: 1,921 read-units: 13,611,792 [6.96 TB]
    written-units: 22,605,956 [11.5 TB]
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 465.37 GiB size: 458.3 GiB (98.48%) used: 13.48 GiB (2.9%) fs: ext4
    block-size: 4096 B dev: /dev/sdb2 maj-min: 8:18 label: RASPIROOT
    uuid: d850171d-fc25-4fe3-b6ea-5fe2bca1d86b
  ID-2: /boot/firmware raw-size: 396 MiB size: 395.8 MiB (99.94%) used: 126 MiB (31.8%) fs: vfat
    block-size: 512 B dev: /dev/sdb1 maj-min: 8:17 label: RASPIFIRM uuid: A4ED-003B
Swap:
  Alert: No swap data was found.
Unmounted:
  ID-1: /dev/sda1 maj-min: 8:1 size: 12.73 TiB fs: ext4 label: N/A
    uuid: 90c968ea-6ef4-46d0-a54b-8b911e9100c6
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA
    chip-ID: 2109:3431 class-ID: 0900
  Device-1: 1-1.4:3 info: Sigma Designs Aeotec Z-Stick Gen5 (ZW090) - UZB
    type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s
    power: 100mA chip-ID: 0658:0200 class-ID: 0a00
  Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003
    class-ID: 0900
  Device-1: 2-1:2 info: Western Digital easystore 264D type: Mass Storage driver: usb-storage
    interfaces: 1 rev: 3.1 speed: 5 Gb/s power: 8mA chip-ID: 1058:264d class-ID: 0806
    Device-2: 2-2:3 info: Realtek RTL9210 M.2 NVME Adapter type: Mass Storage driver: usb-storage
    interfaces: 1 rev: 3.2 speed: 5 Gb/s power: 896mA chip-ID: 0bda:9210 class-ID: 0806
    Sensors:
  Src: /sys System Temperatures: cpu: 51.1 C mobo: N/A
  Fan Speeds (RPM): N/A
Repos:
  Packages: pm: dpkg pkgs: 399 libs: 226 tools: apt,apt-get
  Active apt repos in: /etc/apt/sources.list
    1: deb http: //deb.debian.org/debian bullseye main contrib non-free
    2: deb http: //security.debian.org/debian-security bullseye-security main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/docker.list
    1: deb [arch=arm64 signed-by=/etc/apt/keyrings/docker.gpg] https: //download.docker.com/linux/debian bullseye stable
Processes:
  CPU top: 5 of 336
  1: cpu: 19.0% command: python3 pid: 4864 mem: 632.9 MiB (8.1%)
  2: cpu: 6.9% command: flask started by: python pid: 85338 mem: 28.3 MiB (0.3%)
  3: cpu: 6.3% command: flask started by: python pid: 105477 mem: 31.0 MiB (0.3%)
  4: cpu: 5.4% command: flask started by: python pid: 113466 mem: 26.9 MiB (0.3%)
  5: cpu: 3.0% command: flask started by: python pid: 119004 mem: 25.7 MiB (0.3%)
  Memory top: 5 of 336
  1: mem: 632.9 MiB (8.1%) command: python3 pid: 4864 cpu: 19.0%
  2: mem: 151.9 MiB (1.9%) command: python3 pid: 1353 cpu: 0.2%
  3: mem: 151.6 MiB (1.9%) command: node pid: 3380 cpu: 2.2%
  4: mem: 91.6 MiB (1.1%) command: systemd-journald pid: 246 cpu: 0.1%
  5: mem: 80.1 MiB (1.0%) command: mosquitto pid: 3282 cpu: 0.0%
Info:
  Processes: 336 Uptime: 4h 40m Init: systemd v: 247 target: graphical (5) default: graphical
  tool: systemctl Compilers: gcc: N/A Client: shell wrapper v: 5.1.4-release inxi: 3.3.23

Benchmark #64080 - Brand: Samsung 980 Pro