Benchmark #64567 - pibenchmarks.com

Brand: Samsung 850 EVO
SSD (2.5" SATA)
#17 / 1,539
561
#444 / 1,539
#426 / 875
#97 / 363
6,521
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2022-11-28 06:23:24
#64,567
9,938
+3,417 (+34.38%)
Anonymous

Storage Details
Samsung 850 EVO
SSD (2.5" SATA)
250G
SSD
Samsung
SSD850EVO250GB
SATA
3.10
5,000
174c:55aa
0x174c (ASMedia Technology Inc.)
0x55aa (ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
N/A
4
1,500
500
8 GB
1,600

Operating System

Debian GNU/Linux 11 (bullseye)
aarch64

Benchmark Results
132 MB/s
206.93 MB/s
217.67 MB/s
22,456 IOPS
30,796 IOPS
89,824 KB/s
123,187 KB/s
35,214 KB/s
28,548 KB/s
26,588 KB/s
34,084 KB/s

inxi Results
System: Host: rpi4-20210823 Kernel: 5.10.0-19-arm64 arch: aarch64 bits: 64 compiler: gcc v: 10.2.1 parameters: dma.dmachans=0x37f5 bcm2709.boardrev=0xd03114 bcm2709.serial=0x64944511 bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=tty0 console=ttyS1,115200 root=/dev/sda2 rw fsck.repair=yes net.ifnames=0 rootwait Console: pty pts/5 Distro: Debian GNU/Linux 11 (bullseye) Machine: Type: ARM System: Raspberry Pi 4 Model B Rev 1.4 details: N/A Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 7.63 GiB used: 1.24 GiB (16.2%) RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 Topology: cpus: 1x cores: 4 smt: cache: L1: 320 KiB desc: d-4x32 KiB! i-4x48 KiB L2: 1024 KiB desc: 1x1024 KiB Speed (MHz): avg: 825 high: 1500 min/max: 600/1500 scaling: driver: cpufreq-dt governor: schedutil cores: 1: 1500 2: 600 3: 600 4: 600 bogomips: 432 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: mmio_stale_data status: Not affected Type: retbleed status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: No display server data found. Headless machine? tty: 317x85 API: N/A Message: No display API data available in console. Headless machine? Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Sound API: ALSA v: k5.10.0-19-arm64 running: yes Network: Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 scope: global broadcast: 192.168.X.X IP v6: 2001:9e8:610b:9a00:e65f:1ff:fe30:cf30/64 type: dynamic mngtmpaddr scope: global IP v6: fe80::e65f:1ff:fe30:cf30/64 scope: link Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq IF-ID-1: br-b0a44c24fd7f state: up speed: 10000 Mbps duplex: unknown mac: XX:XX:XX:XX:XX:XX IP v4: 172.18.X.X/16 scope: global broadcast: 172.18.X.X IP v6: fe80::42:e8ff:fe40:cc24/64 scope: link IF-ID-2: docker0 state: down mac: XX:XX:XX:XX:XX:XX Message: Output throttled. IPs: 1! Limit: 10! Override: --limit [1-x!-1 all] IF-ID-3: veth690f3c8 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-4: veth85493e4 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-5: veth9a2c5f3 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-6: wlan0 state: up mac: XX:XX:XX:XX:XX:XX Message: Output throttled. IPs: 3! Limit: 10! Override: --limit [1-x!-1 all] WAN IP: 89.245.X.X Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: hardware: no software: no address: see --recommends Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial Report: This feature requires one of these tools: hciconfig/bt-adapter Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 232.89 GiB used: 8.55 GiB (3.7%) ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Samsung model: SSD 850 EVO 250GB family: based SSDs size: 232.89 GiB block-size: physical: 512 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s type: SSD rev: EMT01B6Q temp: 34 C scheme: MBR SMART: yes state: enabled health: PASSED on: 3y 27d 12h cycles: 2174 written: 45.57 TiB Message: No optical or floppy data found. Partition: ID-1: / raw-size: 232.59 GiB size: 229.13 GiB (98.51%) used: 8.38 GiB (3.7%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT uuid: 899ea962-703a-49b8-926a-33b14329c638 ID-2: /boot/firmware raw-size: 296 MiB size: 295.8 MiB (99.93%) used: 178.1 MiB (60.2%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: 7F54-1442 Swap: Alert: No swap data was found. Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-2:2 info: ASMedia ASM1051E SATA 6Gb/s bridge ASM1053E ASM1153 3Gb/s ASM1153E bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s chip-ID: 174c:55aa class-ID: 0806 Sensors: System Temperatures: cpu: 58.4 C mobo: N/A Fan Speeds (RPM): N/A Repos: Packages: pm: dpkg pkgs: 688 libs: 426 tools: apt,apt-get Active apt repos in: /etc/apt/sources.list 1: deb http://deb.debian.org/debian bullseye main contrib non-free 2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=arm64 signed-by=/etc/apt/keyrings/docker.gpg] https://download.docker.com/linux/debian bullseye stable Processes: CPU top: 5 of 174 1: cpu: 13.9% command: iotop started by: python3 pid: 11990 mem: 14.4 MiB (0.1%) 2: cpu: 7.4% command: dockerd pid: 8177 mem: 105.6 MiB (1.3%) 3: cpu: 2.4% command: htop pid: 11919 mem: 5.27 MiB (0.0%) 4: cpu: 2.0% command: seaf-server pid: 9327 mem: 22.2 MiB (0.2%) 5: cpu: 1.3% command: mysqld pid: 8875 mem: 127.2 MiB (1.6%) Memory top: 5 of 174 1: mem: 136.6 MiB (1.7%) command: gunicorn started by: python3 pid: 9377 cpu: 1.0% 2: mem: 136.0 MiB (1.7%) command: gunicorn started by: python3 pid: 9365 cpu: 1.1% 3: mem: 128.3 MiB (1.6%) command: gunicorn started by: python3 pid: 9366 cpu: 1.0% 4: mem: 127.2 MiB (1.6%) command: mysqld pid: 8875 cpu: 1.3% 5: mem: 105.6 MiB (1.3%) command: dockerd pid: 8177 cpu: 7.4% Info: Processes: 174 Uptime: 1d 18h 42m Init: systemd v: 247 target: graphical (5) default: graphical tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Shell: Bash (sudo) v: 5.1.4 running-in: pty pts/5 inxi: 3.3.23

inxi Results

System:
  Host: rpi4-20210823 Kernel: 5.10.0-19-arm64 arch: aarch64 bits: 64 compiler: gcc v: 10.2.1
    parameters:  dma.dmachans=0x37f5 bcm2709.boardrev=0xd03114 bcm2709.serial=0x64944511
    bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0
    smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000
    console=tty0 console=ttyS1,115200 root=/dev/sda2 rw fsck.repair=yes net.ifnames=0 rootwait
  Console: pty pts/5 Distro: Debian GNU/Linux 11 (bullseye)
Machine:
  Type: ARM System: Raspberry Pi 4 Model B Rev 1.4 details: N/A Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 7.63 GiB used: 1.24 GiB (16.2%)
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0
    stepping: 3
  Topology: cpus: 1x cores: 4 smt:  cache: L1: 320 KiB desc: d-4x32 KiB! i-4x48 KiB
    L2: 1024 KiB desc: 1x1024 KiB
  Speed (MHz): avg: 825 high: 1500 min/max: 600/1500 scaling: driver: cpufreq-dt
    governor: schedutil cores: 1: 1500 2: 600 3: 600 4: 600 bogomips: 432
  Features: asimd cpuid crc32 evtstrm fp
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 status: Vulnerable
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700
    class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700
    class-ID: hdmi
  Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu
  Display: server: No display server data found. Headless machine? tty: 317x85
  API: N/A Message: No display API data available in console. Headless machine?
Audio:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi
  Sound API: ALSA v: k5.10.0-19-arm64 running: yes
Network:
  Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000
    class-ID: ethernet
  IF: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IP v4: 192.168.X.X/24 scope: global broadcast: 192.168.X.X
  IP v6: 2001:9e8:610b:9a00:e65f:1ff:fe30:cf30/64 type: dynamic mngtmpaddr scope: global
  IP v6: fe80::e65f:1ff:fe30:cf30/64 scope: link
  Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A
    chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq
  IF-ID-1: br-b0a44c24fd7f state: up speed: 10000 Mbps duplex: unknown mac: XX:XX:XX:XX:XX:XX
  IP v4: 172.18.X.X/16 scope: global broadcast: 172.18.X.X
  IP v6: fe80::42:e8ff:fe40:cc24/64 scope: link
  IF-ID-2: docker0 state: down mac: XX:XX:XX:XX:XX:XX
  Message: Output throttled. IPs: 1! Limit: 10! Override: --limit [1-x!-1 all]
  IF-ID-3: veth690f3c8 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IF-ID-4: veth85493e4 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IF-ID-5: veth9a2c5f3 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IF-ID-6: wlan0 state: up mac: XX:XX:XX:XX:XX:XX
  Message: Output throttled. IPs: 3! Limit: 10! Override: --limit [1-x!-1 all]
  WAN IP: 89.245.X.X
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
  Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: hardware: no
    software: no address: see --recommends
  Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial
  Report: This feature requires one of these tools: hciconfig/bt-adapter
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 232.89 GiB used: 8.55 GiB (3.7%)
  ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Samsung model: SSD 850 EVO 250GB
    family: based SSDs size: 232.89 GiB block-size: physical: 512 B logical: 512 B sata: 3.1
    speed: 6.0 Gb/s type: SSD rev: EMT01B6Q temp: 34 C scheme: MBR
  SMART: yes state: enabled health: PASSED on: 3y 27d 12h cycles: 2174 written: 45.57 TiB
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 232.59 GiB size: 229.13 GiB (98.51%) used: 8.38 GiB (3.7%) fs: ext4
    block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT
    uuid: 899ea962-703a-49b8-926a-33b14329c638
  ID-2: /boot/firmware raw-size: 296 MiB size: 295.8 MiB (99.93%) used: 178.1 MiB (60.2%)
    fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: 7F54-1442
Swap:
  Alert: No swap data was found.
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA
    chip-ID: 2109:3431 class-ID: 0900
  Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003
    class-ID: 0900
  Device-1: 2-2:2 info: ASMedia ASM1051E SATA 6Gb/s bridge ASM1053E ASM1153 3Gb/s ASM1153E
    bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s chip-ID: 174c:55aa
    class-ID: 0806 Sensors:
  System Temperatures: cpu: 58.4 C mobo: N/A
  Fan Speeds (RPM): N/A
Repos:
  Packages: pm: dpkg pkgs: 688 libs: 426 tools: apt,apt-get
  Active apt repos in: /etc/apt/sources.list
    1: deb http://deb.debian.org/debian bullseye main contrib non-free
    2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/docker.list
    1: deb [arch=arm64 signed-by=/etc/apt/keyrings/docker.gpg] https://download.docker.com/linux/debian bullseye stable
Processes:
  CPU top: 5 of 174
  1: cpu: 13.9% command: iotop started by: python3 pid: 11990 mem: 14.4 MiB (0.1%)
  2: cpu: 7.4% command: dockerd pid: 8177 mem: 105.6 MiB (1.3%)
  3: cpu: 2.4% command: htop pid: 11919 mem: 5.27 MiB (0.0%)
  4: cpu: 2.0% command: seaf-server pid: 9327 mem: 22.2 MiB (0.2%)
  5: cpu: 1.3% command: mysqld pid: 8875 mem: 127.2 MiB (1.6%)
  Memory top: 5 of 174
  1: mem: 136.6 MiB (1.7%) command: gunicorn started by: python3 pid: 9377 cpu: 1.0%
  2: mem: 136.0 MiB (1.7%) command: gunicorn started by: python3 pid: 9365 cpu: 1.1%
  3: mem: 128.3 MiB (1.6%) command: gunicorn started by: python3 pid: 9366 cpu: 1.0%
  4: mem: 127.2 MiB (1.6%) command: mysqld pid: 8875 cpu: 1.3%
  5: mem: 105.6 MiB (1.3%) command: dockerd pid: 8177 cpu: 7.4%
Info:
  Processes: 174 Uptime: 1d 18h 42m Init: systemd v: 247 target: graphical (5) default: graphical
  tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Shell: Bash (sudo) v: 5.1.4 running-in: pty pts/5
  inxi: 3.3.23

Benchmark #64567 - Brand: Samsung 850 EVO