Benchmark #6487 - pibenchmarks.com

Brand: Kingston DataTraveler DTR30
USB Flash
#123 / 1,700
155
#1,446 / 1,700
#47 / 94
#45 / 89
976
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-01-07 17:22:24
#6,487
574
-402 (-70.03%)
Anonymous
Kingston Data Traveler 3G on Pi 4

Storage Details
Kingston DataTraveler DTR30
USB Flash
28.8G
USB Flash
Kingston
DataTraveler3.0
3.00
5,000
0951:1666
0x0951 (Kingston Technology)
0x1666 (DataTraveler 100 G3/G4/SE9 G2/50)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
9.6 MB/s
85.78 MB/s
90.46 MB/s
22 IOPS
2,240 IOPS
89 KB/s
8,963 KB/s
664 KB/s
3,015 KB/s
8,752 KB/s
33 KB/s

inxi Results
System: Host: atcsrpi.at-crew.net Kernel: 4.19.75-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 console=tty1 root=PARTUUID=3c3be7c3-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 Memory: RAM: total: 1.96 GiB used: 307.6 MiB (15.3%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 237x63 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.75-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link WAN IP: Drives: Local Storage: total: 29.75 GiB used: 3.95 GiB (13.3%) ID-1: /dev/mmcblk0 model: SD size: 953.5 MiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: Kingston model: DataTraveler 3.0 size: 28.82 GiB block size: physical: 512 B logical: 512 B scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 28.77 GiB size: 28.30 GiB (98.37%) used: 3.93 GiB (13.9%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 29075e46-f0d4-44e2-a9e7-55ac02d6e6cc ID-2: /boot raw size: 43.9 MiB size: 43.2 MiB (98.43%) used: 25.6 MiB (59.2%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 9304-D9FD Unmounted: ID-1: /dev/mmcblk0p1 size: 953.4 MiB fs: vfat label: RPIBOOT uuid: ADBB-EC7D USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: Kingston DataTraveler 100 G3/G4/SE9 G2 type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.2 speed: 5 Gb/s chip ID: 0951:1666 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi 2: deb-src http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi No active apt repos in: /etc/apt/sources.list.d/10-backports.list Active apt repos in: /etc/apt/sources.list.d/10-buster.list 1: deb http: //mirrordirector.raspbian.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb https: //archive.raspberrypi.org/debian/ buster main ui 2: deb-src https: //archive.raspberrypi.org/debian/ buster main ui Processes: CPU top: 5 1: cpu: 9.5% command: mysqld pid: 832 mem: 83.9 MiB (4.2%) 2: cpu: 0.7% command: fail2ban-server started by: python3 pid: 620 mem: 17.1 MiB (0.8%) 3: cpu: 0.4% command: imapd pid: 3552 mem: 2.85 MiB (0.1%) 4: cpu: 0.3% command: apache2 pid: 2359 mem: 20.5 MiB (1.0%) 5: cpu: 0.3% command: couriertls pid: 3551 mem: 3.94 MiB (0.1%) Memory top: 5 1: mem: 83.9 MiB (4.2%) command: mysqld pid: 832 cpu: 9.5% 2: mem: 71.3 MiB (3.5%) command: apache2 pid: 969 cpu: 0.2% 3: mem: 71.0 MiB (3.5%) command: apache2 pid: 968 cpu: 0.2% 4: mem: 69.4 MiB (3.4%) command: apache2 pid: 1001 cpu: 0.1% 5: mem: 64.5 MiB (3.2%) command: apache2 pid: 1286 cpu: 0.1% Info: Processes: 170 Uptime: 35m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 6/8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: atcsrpi.at-crew.net Kernel: 4.19.75-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 
           vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 console=tty1 root=PARTUUID=3c3be7c3-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 
           Memory:    RAM: total: 1.96 GiB used: 307.6 MiB (15.3%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 237x63 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.75-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 29.75 GiB used: 3.95 GiB (13.3%) 
           ID-1: /dev/mmcblk0 model: SD size: 953.5 MiB block size: physical: 512 B logical: 512 B 
           scheme: MBR 
           ID-2: /dev/sda type: USB vendor: Kingston model: DataTraveler 3.0 size: 28.82 GiB 
           block size: physical: 512 B logical: 512 B scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 28.77 GiB size: 28.30 GiB (98.37%) used: 3.93 GiB (13.9%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 29075e46-f0d4-44e2-a9e7-55ac02d6e6cc 
           ID-2: /boot raw size: 43.9 MiB size: 43.2 MiB (98.43%) used: 25.6 MiB (59.2%) fs: vfat 
           block size: 512 B dev: /dev/sda1 label: boot uuid: 9304-D9FD 
Unmounted: ID-1: /dev/mmcblk0p1 size: 953.4 MiB fs: vfat label: RPIBOOT uuid: ADBB-EC7D 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: Kingston DataTraveler 100 G3/G4/SE9 G2 type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 3.2 speed: 5 Gb/s chip ID: 0951:1666 
           Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           2: deb-src http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           No active apt repos in: /etc/apt/sources.list.d/10-backports.list 
           Active apt repos in: /etc/apt/sources.list.d/10-buster.list 
           1: deb http: //mirrordirector.raspbian.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb https: //archive.raspberrypi.org/debian/ buster main ui
           2: deb-src https: //archive.raspberrypi.org/debian/ buster main ui
Processes: CPU top: 5 
           1: cpu: 9.5% command: mysqld pid: 832 mem: 83.9 MiB (4.2%) 
           2: cpu: 0.7% command: fail2ban-server started by: python3 pid: 620 mem: 17.1 MiB (0.8%) 
           3: cpu: 0.4% command: imapd pid: 3552 mem: 2.85 MiB (0.1%) 
           4: cpu: 0.3% command: apache2 pid: 2359 mem: 20.5 MiB (1.0%) 
           5: cpu: 0.3% command: couriertls pid: 3551 mem: 3.94 MiB (0.1%) 
           Memory top: 5 
           1: mem: 83.9 MiB (4.2%) command: mysqld pid: 832 cpu: 9.5% 
           2: mem: 71.3 MiB (3.5%) command: apache2 pid: 969 cpu: 0.2% 
           3: mem: 71.0 MiB (3.5%) command: apache2 pid: 968 cpu: 0.2% 
           4: mem: 69.4 MiB (3.4%) command: apache2 pid: 1001 cpu: 0.1% 
           5: mem: 64.5 MiB (3.2%) command: apache2 pid: 1286 cpu: 0.1% 
Info:      Processes: 170 Uptime: 35m Init: systemd v: 241 runlevel: 3 target: multi-user.target 
           Compilers: gcc: 8.3.0 alt: 6/8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

Benchmark #6487 - Brand: Kingston DataTraveler DTR30