Benchmark #6755 - pibenchmarks.com

Brand: SanDisk SDHC (SS16G)
C4
#256 / 1,672
52
#1,498 / 1,672
#303 / 389
690
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-01-10 20:45:01
#6,755
893
+203 (+22.73%)
NecroGnome
SanDisk 16gb on Pi 3b+

Secure Digital (SD) Card Details
SanDisk SDHC (SS16G)
C4
12.2G
SD
SanDisk
SS16G
SDHC
3.00
0x03
SD
8.0
10/2019
Class 4
None
None
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B+ 1.3
Raspberry Pi 3 Model B Plus Rev 1.3
Raspberry Pi Foundation
1,400
400
450 (-50)
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
8 MB/s
22.08 MB/s
22.12 MB/s
695 IOPS
2,361 IOPS
2,781 KB/s
9,445 KB/s
7,653 KB/s
3,472 KB/s
7,460 KB/s
2,382 KB/s

inxi Results
System: Host: raspberrypi Kernel: 4.19.75-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p7 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 2 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 Memory: RAM: total: 1002.1 MiB used: 188.2 MiB (18.8%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbturbo tty: 237x66 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.75-v7+ Network: Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:5 chip ID: 0424:7800 IF: eth0 state: down mac: IF-ID-1: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 14.84 GiB used: 6.80 GiB (45.8%) ID-1: /dev/mmcblk0 model: SS16G size: 14.84 GiB block size: physical: 512 B logical: 512 B scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 12.16 GiB size: 11.85 GiB (97.40%) used: 6.75 GiB (57.0%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p7 label: root uuid: a1025f9f-5294-4912-a988-380332cbbd26 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.8 MiB (20.5%) fs: vfat block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: 04A6-61A0 Unmounted: ID-1: /dev/mmcblk0p1 size: 2.39 GiB fs: vfat label: RECOVERY uuid: CC38-BFDD ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS uuid: d300deb2-e7fc-4b8c-badd-1fc4f29950c3 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Device-1: 1-1.1.1:5 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 Hub: 1-1.1.3:4 info: Atmel at43301 4-Port Hub ports: 4 rev: 1.1 speed: 12 Mb/s chip ID: 03eb:3301 Device-2: 1-1.1.X.X:6 info: N/A type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s chip ID: 275d:0ba6 Device-3: 1-1.1.X.X:7 info: SteelSeries ApS Ideazon Zboard type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 1038:0100 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 0.1% command: init pid: 1 mem: 4.92 MiB (0.5%) 2: cpu: 0.1% command: [kworker/u8:1-events_unbound] pid: 1908 mem: 0.00 MiB (0.0%) 3: cpu: 0.1% command: sshd: pid: 1909 mem: 5.97 MiB (0.6%) 4: cpu: 0.1% command: -bash pid: 1925 mem: 3.50 MiB (0.3%) 5: cpu: 0.1% command: bash pid: 1974 mem: 2.75 MiB (0.2%) Memory top: 5 1: mem: 12.1 MiB (1.3%) command: packagekitd pid: 2120 cpu: 0.1% 2: mem: 5.97 MiB (0.6%) command: sshd: pid: 1909 cpu: 0.1% 3: mem: 5.78 MiB (0.6%) command: lxpanel pid: 569 cpu: 0.0% 4: mem: 4.92 MiB (0.5%) command: init pid: 1 cpu: 0.1% 5: mem: 4.86 MiB (0.5%) command: xorg pid: 446 cpu: 0.0% Info: Processes: 142 Uptime: 1h 36m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: raspberrypi Kernel: 4.19.75-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 
           bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p7 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Console: tty 2 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 
           rev: a020d3 Memory:    RAM: total: 1002.1 MiB used: 188.2 MiB (18.8%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 
           Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: fbturbo tty: 237x66 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.75-v7+ 
Network:   Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:5 
           chip ID: 0424:7800 
           IF: eth0 state: down mac:  
           IF-ID-1: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 14.84 GiB used: 6.80 GiB (45.8%) 
           ID-1: /dev/mmcblk0 model: SS16G size: 14.84 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 12.16 GiB size: 11.85 GiB (97.40%) used: 6.75 GiB (57.0%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p7 label: root 
           uuid: a1025f9f-5294-4912-a988-380332cbbd26 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.8 MiB (20.5%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: 04A6-61A0 
Unmounted: ID-1: /dev/mmcblk0p1 size: 2.39 GiB fs: vfat label: RECOVERY uuid: CC38-BFDD 
           ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
           ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS 
           uuid: d300deb2-e7fc-4b8c-badd-1fc4f29950c3 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Device-1: 1-1.1.1:5 info: Standard Microsystems type: Network driver: lan78xx 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 
           Hub: 1-1.1.3:4 info: Atmel at43301 4-Port Hub ports: 4 rev: 1.1 speed: 12 Mb/s 
           chip ID: 03eb:3301 
           Device-2: 1-1.1.X.X:6 info: N/A type: Mouse driver: hid-generic,usbhid interfaces: 1 
           rev: 1.1 speed: 1.5 Mb/s chip ID: 275d:0ba6 
           Device-3: 1-1.1.X.X:7 info: SteelSeries ApS Ideazon Zboard type: Keyboard,HID 
           driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 1038:0100 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 0.1% command: init pid: 1 mem: 4.92 MiB (0.5%) 
           2: cpu: 0.1% command: [kworker/u8:1-events_unbound] pid: 1908 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.1% command: sshd: pid: 1909 mem: 5.97 MiB (0.6%) 
           4: cpu: 0.1% command: -bash pid: 1925 mem: 3.50 MiB (0.3%) 
           5: cpu: 0.1% command: bash pid: 1974 mem: 2.75 MiB (0.2%) 
           Memory top: 5 
           1: mem: 12.1 MiB (1.3%) command: packagekitd pid: 2120 cpu: 0.1% 
           2: mem: 5.97 MiB (0.6%) command: sshd: pid: 1909 cpu: 0.1% 
           3: mem: 5.78 MiB (0.6%) command: lxpanel pid: 569 cpu: 0.0% 
           4: mem: 4.92 MiB (0.5%) command: init pid: 1 cpu: 0.1% 
           5: mem: 4.86 MiB (0.5%) command: xorg pid: 446 cpu: 0.0% 
Info:      Processes: 142 Uptime: 1h 36m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

Benchmark #6755 - Brand: SanDisk SDHC (SS16G)