Benchmark #67679 - pibenchmarks.com

Brand: Micro Center USB Flash Drive
USB Flash
#391 / 1,539
18
#1,266 / 1,539
#39 / 90
#39 / 86
1,009
	Amazon.com

Overview
2023-02-27 10:51:48
#67,679
875
-134 (-15.31%)
bilnaad
articona usb stick

Storage Details
Micro Center USB Flash Drive
USB Flash
28.8G
USB Flash
MicroCenter
USBDISK
3.10
5,000
090c:2000
0x090c
0x2000 (SoftGate 802.11 Adapter)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
N/A
4
1,500
500
4 GB
1,600

Operating System

Debian GNU/Linux 11 (bullseye)
aarch64

Benchmark Results
2.3 MB/s
139 MB/s
111.45 MB/s
49 IOPS
3,282 IOPS
196 KB/s
13,128 KB/s
14,324 KB/s
7,821 KB/s
11,812 KB/s
249 KB/s

inxi Results
System: Kernel: 5.10.0-20-arm64 arch: aarch64 bits: 64 compiler: gcc v: 10.2.1 parameters: dma.dmachans=0x37f5 bcm2709.boardrev=0xc03111 bcm2709.serial=0xfb9a1763 bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=tty0 console=ttyS1,115200 root=LABEL=RASPIROOT rw fsck.repair=yes net.ifnames=0 rootwait systemd.unified_cgroup_hierarchy=false Console: N/A Distro: Debian GNU/Linux 11 (bullseye) Machine: Type: ARM System: Raspberry Pi 4 Model B Rev 1.1 details: N/A Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.7 GiB used: 2.29 GiB (61.9%) RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 Topology: cpus: 1x cores: 4 smt: cache: L1: 320 KiB desc: d-4x32 KiB! i-4x48 KiB L2: 1024 KiB desc: 1x1024 KiB Speed (MHz): avg: 1000 min/max: 600/1500 scaling: driver: cpufreq-dt governor: schedutil cores: 1: 1000 2: 1000 3: 1000 4: 1000 bogomips: 432 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: mmio_stale_data status: Not affected Type: retbleed status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: No display server data found. Headless machine? tty: 80x40 API: N/A Message: No display API data available in console. Headless machine? Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Sound API: ALSA v: k5.10.0-20-arm64 running: yes Network: Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic noprefixroute scope: global IP v6: type: noprefixroute scope: link Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: hassio state: up speed: 10000 Mbps duplex: unknown mac: Message: Output throttled. IPs: 2! Limit: 10! Override: --limit [1-x!-1 all] IF-ID-3: veth0d5644e state: up speed: 10000 Mbps duplex: full mac: IF-ID-4: veth5c0b8f3 state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: veth9786e47 state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: veth9c8afcd state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: vethb2944d8 state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: vethcaf8649 state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: vethe7ee289 state: up speed: 10000 Mbps duplex: full mac: IF-ID-10: vethefe78e4 state: up speed: 10000 Mbps duplex: full mac: IF-ID-11: wlan0 state: down mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: hardware: no software: no address: see --recommends Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial Report: This feature requires one of these tools: hciconfig/bt-adapter Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 29.3 GiB used: 4.69 GiB (16.0%) ID-1: /dev/sda maj-min: 8:0 type: USB vendor: SMI (STMicroelectronics) model: USB DISK size: 29.3 GiB block-size: physical: 512 B logical: 512 B type: N/A rev: 1100 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No optical or floppy data found. Partition: ID-1: / raw-size: 28.8 GiB size: 28.32 GiB (98.33%) used: 4.57 GiB (16.1%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT uuid: db48172b-87f8-490d-bcd3-86f26b800c72 ID-2: /boot/firmware raw-size: 508 MiB size: 507.7 MiB (99.94%) used: 126.1 MiB (24.8%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: 5D5C-AE50 Swap: Alert: No swap data was found. Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.3:3 info: Silicon Labs CP210x UART Bridge type: driver: cp210x interfaces: 1 rev: 1.1 speed: 12 Mb/s power: 100mA chip-ID: 10c4:ea60 class-ID: 0000 Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-2:2 info: Silicon Motion - Taiwan (formerly Feiya ) USB DISK type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.1 speed: 5 Gb/s power: 504mA chip-ID: 090c:2000 class-ID: 0806 Sensors: Src: /sys System Temperatures: cpu: 50.1 C mobo: N/A Fan Speeds (RPM): N/A Repos: Packages: pm: dpkg pkgs: 415 libs: 235 tools: apt,apt-get Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian bullseye main non-free 2: deb http: //deb.debian.org/debian bullseye-updates main non-free 3: deb http: //security.debian.org/debian-security bullseye-security main non-free Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=arm64 signed-by=/etc/apt/keyrings/docker.gpg] https: //download.docker.com/linux/debian bullseye stable Processes: CPU top: 5 of 212 1: cpu: 1.7% command: python3 pid: 2900 mem: 1398.8 MiB (36.8%) 2: cpu: 0.2% command: pulseaudio pid: 2833 mem: 21.2 MiB (0.5%) 3: cpu: 0.2% command: [kworker/0:1-events] pid: 29056 mem: 0.00 MiB (0.0%) 4: cpu: 0.2% command: [kworker/0:3-mm_percpu_wq] pid: 33406 mem: 0.00 MiB (0.0%) 5: cpu: 0.1% command: [irq/27-mmc1] pid: 147 mem: 0.00 MiB (0.0%) Memory top: 5 of 212 1: mem: 1398.8 MiB (36.8%) command: python3 pid: 2900 cpu: 1.7% 2: mem: 153.2 MiB (4.0%) command: python3 pid: 1430 cpu: 0.0% 3: mem: 116.4 MiB (3.0%) command: node pid: 7639 cpu: 0.0% 4: mem: 84.9 MiB (2.2%) command: dockerd pid: 575 cpu: 0.0% 5: mem: 60.8 MiB (1.6%) command: mosquitto pid: 3276 cpu: 0.0% Info: Processes: 212 Uptime: 3d 15h 51m Init: systemd v: 247 target: graphical (5) default: graphical tool: systemctl Compilers: gcc: N/A Client: shell wrapper v: 5.1.4-release inxi: 3.3.25

inxi Results

System:
  Kernel: 5.10.0-20-arm64 arch: aarch64 bits: 64 compiler: gcc v: 10.2.1 parameters:
    dma.dmachans=0x37f5 bcm2709.boardrev=0xc03111 bcm2709.serial=0xfb9a1763
    bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0
    smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000
    console=tty0 console=ttyS1,115200 root=LABEL=RASPIROOT rw fsck.repair=yes net.ifnames=0
    rootwait systemd.unified_cgroup_hierarchy=false
  Console: N/A Distro: Debian GNU/Linux 11 (bullseye)
Machine:
  Type: ARM System: Raspberry Pi 4 Model B Rev 1.1 details: N/A Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 3.7 GiB used: 2.29 GiB (61.9%)
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0
    stepping: 3
  Topology: cpus: 1x cores: 4 smt:  cache: L1: 320 KiB desc: d-4x32 KiB! i-4x48 KiB
    L2: 1024 KiB desc: 1x1024 KiB
  Speed (MHz): avg: 1000 min/max: 600/1500 scaling: driver: cpufreq-dt governor: schedutil cores:
    1: 1000 2: 1000 3: 1000 4: 1000 bogomips: 432
  Features: asimd cpuid crc32 evtstrm fp
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 status: Vulnerable
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700
    class-ID: hdmi
  Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu
  Display: server: No display server data found. Headless machine? tty: 80x40
  API: N/A Message: No display API data available in console. Headless machine?
Audio:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi
  Sound API: ALSA v: k5.10.0-20-arm64 running: yes
Network:
  Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000
    class-ID: ethernet
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 
  IP v4:  type: dynamic noprefixroute scope: global broadcast: 
  IP v6:  type: dynamic noprefixroute scope: global
  IP v6:  type: noprefixroute scope: link
  Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A
    chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq
  IF-ID-1: docker0 state: up speed: 10000 Mbps duplex: unknown mac: 
  IP v4:  scope: global broadcast: 
  IP v6:  scope: link
  IF-ID-2: hassio state: up speed: 10000 Mbps duplex: unknown mac: 
  Message: Output throttled. IPs: 2! Limit: 10! Override: --limit [1-x!-1 all]
  IF-ID-3: veth0d5644e state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-4: veth5c0b8f3 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-5: veth9786e47 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-6: veth9c8afcd state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-7: vethb2944d8 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-8: vethcaf8649 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-9: vethe7ee289 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-10: vethefe78e4 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-11: wlan0 state: down mac: 
  WAN IP: 
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
  Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: hardware: no
    software: no address: see --recommends
  Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial
  Report: This feature requires one of these tools: hciconfig/bt-adapter
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 29.3 GiB used: 4.69 GiB (16.0%)
  ID-1: /dev/sda maj-min: 8:0 type: USB vendor: SMI (STMicroelectronics) model: USB DISK
    size: 29.3 GiB block-size: physical: 512 B logical: 512 B type: N/A rev: 1100
    scheme: MBR
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 28.8 GiB size: 28.32 GiB (98.33%) used: 4.57 GiB (16.1%) fs: ext4
    block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT
    uuid: db48172b-87f8-490d-bcd3-86f26b800c72
  ID-2: /boot/firmware raw-size: 508 MiB size: 507.7 MiB (99.94%) used: 126.1 MiB (24.8%)
    fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: 5D5C-AE50
Swap:
  Alert: No swap data was found.
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA
    chip-ID: 2109:3431 class-ID: 0900
  Device-1: 1-1.3:3 info: Silicon Labs CP210x UART Bridge type:  driver: cp210x
    interfaces: 1 rev: 1.1 speed: 12 Mb/s power: 100mA chip-ID: 10c4:ea60 class-ID: 0000
    Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003
    class-ID: 0900
  Device-1: 2-2:2 info: Silicon Motion - Taiwan (formerly Feiya ) USB DISK type: Mass Storage
    driver: usb-storage interfaces: 1 rev: 3.1 speed: 5 Gb/s power: 504mA chip-ID: 090c:2000
    class-ID: 0806 Sensors:
  Src: /sys System Temperatures: cpu: 50.1 C mobo: N/A
  Fan Speeds (RPM): N/A
Repos:
  Packages: pm: dpkg pkgs: 415 libs: 235 tools: apt,apt-get
  Active apt repos in: /etc/apt/sources.list
    1: deb http: //deb.debian.org/debian bullseye main non-free
    2: deb http: //deb.debian.org/debian bullseye-updates main non-free
    3: deb http: //security.debian.org/debian-security bullseye-security main non-free
  Active apt repos in: /etc/apt/sources.list.d/docker.list
    1: deb [arch=arm64 signed-by=/etc/apt/keyrings/docker.gpg] https: //download.docker.com/linux/debian bullseye stable
Processes:
  CPU top: 5 of 212
  1: cpu: 1.7% command: python3 pid: 2900 mem: 1398.8 MiB (36.8%)
  2: cpu: 0.2% command: pulseaudio pid: 2833 mem: 21.2 MiB (0.5%)
  3: cpu: 0.2% command: [kworker/0:1-events] pid: 29056 mem: 0.00 MiB (0.0%)
  4: cpu: 0.2% command: [kworker/0:3-mm_percpu_wq] pid: 33406 mem: 0.00 MiB (0.0%)
  5: cpu: 0.1% command: [irq/27-mmc1] pid: 147 mem: 0.00 MiB (0.0%)
  Memory top: 5 of 212
  1: mem: 1398.8 MiB (36.8%) command: python3 pid: 2900 cpu: 1.7%
  2: mem: 153.2 MiB (4.0%) command: python3 pid: 1430 cpu: 0.0%
  3: mem: 116.4 MiB (3.0%) command: node pid: 7639 cpu: 0.0%
  4: mem: 84.9 MiB (2.2%) command: dockerd pid: 575 cpu: 0.0%
  5: mem: 60.8 MiB (1.6%) command: mosquitto pid: 3276 cpu: 0.0%
Info:
  Processes: 212 Uptime: 3d 15h 51m Init: systemd v: 247 target: graphical (5) default: graphical
  tool: systemctl Compilers: gcc: N/A Client: shell wrapper v: 5.1.4-release inxi: 3.3.25

Benchmark #67679 - Brand: Micro Center USB Flash Drive