Benchmark #6810 - pibenchmarks.com

Brand: Transcend MSA Series
SSD (mSATA)
#92 / 1,665
168
#655 / 1,665
#634 / 977
#25 / 69
6,104
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-01-12 04:45:33
#6,810
1,074
-5,030 (-468.34%)
Anonymous
Jeedom

Storage Details
Transcend MSA Series
SSD (mSATA)
16G
SSD
Transcend
TS16GMSA370
SATA
2.10
480
174c:55aa
0x174c (ASMedia Technology Inc.)
0x55aa (ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B+ 1.3
Raspberry Pi 3 Model B Plus Rev 1.3
Raspberry Pi Foundation
1,400
400
450 (-50)

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
11.3 MB/s
22.12 MB/s
25.44 MB/s
112 IOPS
2,132 IOPS
448 KB/s
8,528 KB/s
11,430 KB/s
2,720 KB/s
9,019 KB/s
3,629 KB/s

inxi Results
System: Host: jeedom Kernel: 4.19.75-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=1280 bcm2708_fb.fbheight=720 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=PARTUUID=7cf00764-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles fsck.mode=force Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 Memory: RAM: total: 1002.1 MiB used: 551.9 MiB (55.1%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 4: 1400 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbturbo tty: 80x24 Message: Advanced graphics data unavailable for root. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.75-v7+ Network: Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:5 chip ID: 0424:7800 IF: enxb827eb260eaa state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-1: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 14.91 GiB used: 7.55 GiB (50.6%) ID-1: /dev/sda type: USB vendor: Transcend model: TS16GMSA370 size: 14.91 GiB block size: physical: 512 B logical: 512 B scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 14.79 GiB size: 14.49 GiB (98.00%) used: 7.53 GiB (52.0%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: b57a7299-0677-4dc6-b4b0-c10f107f0f6d ID-2: /boot raw size: 43.9 MiB size: 43.2 MiB (98.43%) used: 22.4 MiB (51.9%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: AF14-47C0 Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Device-1: 1-1.1.1:5 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 Device-2: 1-1.1.3:4 info: Future Devices FT232 Serial (UART) IC type: driver: ftdi_sio interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 0403:6001 Device-3: 1-1.2:6 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 174c:55aa Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/azlux.list 1: deb http: //packages.azlux.fr/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/nodesource.list 1: deb https: //deb.nodesource.com/node_12.x buster main 2: deb-src https: //deb.nodesource.com/node_12.x buster main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main ui Processes: CPU top: 5 1: cpu: 5.3% command: mysqld pid: 545 mem: 180.8 MiB (19.5%) 2: cpu: 5.3% command: [kworker/3:3-events_freezable] pid: 26817 mem: 0.00 MiB (0.0%) 3: cpu: 2.7% command: [kworker/3:0-mm_percpu_wq] pid: 20078 mem: 0.00 MiB (0.0%) 4: cpu: 1.9% command: openzwaved.py started by: python pid: 2429 mem: 27.0 MiB (2.9%) 5: cpu: 1.5% command: rfxcomd.py started by: python pid: 1642 mem: 15.7 MiB (1.6%) Memory top: 5 1: mem: 180.8 MiB (19.5%) command: mysqld pid: 545 cpu: 5.3% 2: mem: 51.8 MiB (5.5%) command: homebridge pid: 24206 cpu: 0.8% 3: mem: 37.8 MiB (4.0%) command: alexaapi.js started by: nodejs pid: 1146 cpu: 0.0% 4: mem: 35.2 MiB (3.7%) command: jeecron.php started by: php pid: 24313 cpu: 0.0% 5: mem: 29.3 MiB (3.1%) command: apache2 pid: 31020 cpu: 0.8% Info: Processes: 145 Uptime: 3d 2h 57m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 6/8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: jeedom Kernel: 4.19.75-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=1280 
           bcm2708_fb.fbheight=720 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 
           root=PARTUUID=7cf00764-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           quiet splash plymouth.ignore-serial-consoles fsck.mode=force 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 
           rev: a020d3 Memory:    RAM: total: 1002.1 MiB used: 551.9 MiB (55.1%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 
           Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 
           4: 1400 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: fbturbo tty: 80x24 
           Message: Advanced graphics data unavailable for root. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.75-v7+ 
Network:   Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:5 
           chip ID: 0424:7800 
           IF: enxb827eb260eaa state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-1: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 14.91 GiB used: 7.55 GiB (50.6%) 
           ID-1: /dev/sda type: USB vendor: Transcend model: TS16GMSA370 size: 14.91 GiB 
           block size: physical: 512 B logical: 512 B scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 14.79 GiB size: 14.49 GiB (98.00%) used: 7.53 GiB (52.0%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: b57a7299-0677-4dc6-b4b0-c10f107f0f6d 
           ID-2: /boot raw size: 43.9 MiB size: 43.2 MiB (98.43%) used: 22.4 MiB (51.9%) fs: vfat 
           block size: 512 B dev: /dev/sda1 label: boot uuid: AF14-47C0 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Device-1: 1-1.1.1:5 info: Standard Microsystems type: Network driver: lan78xx 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 
           Device-2: 1-1.1.3:4 info: Future Devices FT232 Serial (UART) IC type:  
           driver: ftdi_sio interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 0403:6001 
           Device-3: 1-1.2:6 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s 
           chip ID: 174c:55aa Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/azlux.list 
           1: deb http: //packages.azlux.fr/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/nodesource.list 
           1: deb https: //deb.nodesource.com/node_12.x buster main
           2: deb-src https: //deb.nodesource.com/node_12.x buster main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main ui
Processes: CPU top: 5 
           1: cpu: 5.3% command: mysqld pid: 545 mem: 180.8 MiB (19.5%) 
           2: cpu: 5.3% command: [kworker/3:3-events_freezable] pid: 26817 mem: 0.00 MiB (0.0%) 
           3: cpu: 2.7% command: [kworker/3:0-mm_percpu_wq] pid: 20078 mem: 0.00 MiB (0.0%) 
           4: cpu: 1.9% command: openzwaved.py started by: python pid: 2429 mem: 27.0 MiB (2.9%) 
           5: cpu: 1.5% command: rfxcomd.py started by: python pid: 1642 mem: 15.7 MiB (1.6%) 
           Memory top: 5 
           1: mem: 180.8 MiB (19.5%) command: mysqld pid: 545 cpu: 5.3% 
           2: mem: 51.8 MiB (5.5%) command: homebridge pid: 24206 cpu: 0.8% 
           3: mem: 37.8 MiB (4.0%) command: alexaapi.js started by: nodejs pid: 1146 cpu: 0.0% 
           4: mem: 35.2 MiB (3.7%) command: jeecron.php started by: php pid: 24313 cpu: 0.0% 
           5: mem: 29.3 MiB (3.1%) command: apache2 pid: 31020 cpu: 0.8% 
Info:      Processes: 145 Uptime: 3d 2h 57m Init: systemd v: 241 runlevel: 3 
           target: multi-user.target Compilers: gcc: 8.3.0 alt: 6/8 Client: shell wrapper 
           v: 5.0.3-release inxi: 3.0.37

Benchmark #6810 - Brand: Transcend MSA Series