Benchmark #6860 - pibenchmarks.com

Brand: Samsung SD EVO (00000)
C10 U1
#26 / 1,679
569
#1,403 / 1,679
#257 / 394
1,036
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-01-12 16:57:07
#6,860
1,339
+303 (+22.63%)
jgonzi
Samsung SD Card 10 32Gb

Secure Digital (SD) Card Details
Samsung SD EVO (00000)
C10 U1
29.6G
SD
Samsung
00000
SDHC
3.00
0x1b
SM
1.0
06/2015
Class 10
None
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,800 (+300)
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
23.2 MB/s
34.12 MB/s
38.76 MB/s
506 IOPS
3,354 IOPS
2,026 KB/s
13,418 KB/s
10,636 KB/s
3,648 KB/s
10,446 KB/s
3,584 KB/s

inxi Results
System: Host: Raspi4 Kernel: 4.19.93-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=6c586e13-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 379.2 MiB (9.5%) gpu: 32.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1296 Speed: 1800 MHz min/max: 600/1800 MHz Core speeds (MHz): 1: 1800 2: 1800 3: 1800 4: 1800 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 196x54 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.93-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 3.67 TiB used: 297.71 GiB (7.9%) ID-1: /dev/mmcblk0 model: 00000 size: 29.81 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: Western Digital model: WD My Passport 2626 size: 1.82 TiB block size: physical: 512 B logical: 512 B rev: 1028 scheme: GPT ID-3: /dev/sdb type: USB vendor: Seagate model: ST2000DM001-1ER164 size: 1.82 TiB block size: physical: 512 B logical: 512 B rotation: 7200 rpm rev: 0209 scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.56 GiB size: 29.07 GiB (98.35%) used: 3.41 GiB (11.7%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.3 MiB (20.8%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 ID-3: /media/cloud raw size: 1.82 TiB size: 1.82 TiB (100.00%) used: 96.39 GiB (5.2%) fs: ntfs block size: 4096 B dev: /dev/sdb1 label: Maxtor uuid: 264EC4554EC41F83 ID-4: /media/dlna raw size: 1.82 TiB size: 1.82 TiB (100.00%) used: 197.86 GiB (10.6%) fs: ntfs block size: 4096 B dev: /dev/sda1 label: DLNA uuid: 2E7E405E7E402147 Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:3 info: Seagate RSS LLC type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 0bc2:6123 Device-2: 2-2:2 info: Western Digital type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 1058:2626 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 0.8% command: deluged started by: python pid: 868 mem: 33.2 MiB (0.8%) 2: cpu: 0.6% command: init pid: 1 mem: 8.11 MiB (0.2%) 3: cpu: 0.4% command: smartd pid: 1472 mem: 3.10 MiB (0.0%) 4: cpu: 0.2% command: redis-server pid: 756 mem: 3.93 MiB (0.0%) 5: cpu: 0.2% command: mysqld pid: 757 mem: 91.7 MiB (2.3%) Memory top: 5 1: mem: 91.7 MiB (2.3%) command: mysqld pid: 757 cpu: 0.2% 2: mem: 33.2 MiB (0.8%) command: deluged started by: python pid: 868 cpu: 0.8% 3: mem: 32.8 MiB (0.8%) command: apache2 pid: 853 cpu: 0.0% 4: mem: 32.8 MiB (0.8%) command: apache2 pid: 819 cpu: 0.1% 5: mem: 32.8 MiB (0.8%) command: apache2 pid: 820 cpu: 0.1% Info: Processes: 155 Uptime: 12m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: Raspi4 Kernel: 4.19.93-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=6c586e13-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 379.2 MiB (9.5%) gpu: 32.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1296 
           Speed: 1800 MHz min/max: 600/1800 MHz Core speeds (MHz): 1: 1800 2: 1800 3: 1800 
           4: 1800 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 196x54 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.93-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 3.67 TiB used: 297.71 GiB (7.9%) 
           ID-1: /dev/mmcblk0 model: 00000 size: 29.81 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: Western Digital model: WD My Passport 2626 
           size: 1.82 TiB block size: physical: 512 B logical: 512 B rev: 1028 
           scheme: GPT 
           ID-3: /dev/sdb type: USB vendor: Seagate model: ST2000DM001-1ER164 size: 1.82 TiB 
           block size: physical: 512 B logical: 512 B rotation: 7200 rpm rev: 0209 scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 29.56 GiB size: 29.07 GiB (98.35%) used: 3.41 GiB (11.7%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.3 MiB (20.8%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 
           ID-3: /media/cloud raw size: 1.82 TiB size: 1.82 TiB (100.00%) used: 96.39 GiB (5.2%) 
           fs: ntfs block size: 4096 B dev: /dev/sdb1 label: Maxtor uuid: 264EC4554EC41F83 
           ID-4: /media/dlna raw size: 1.82 TiB size: 1.82 TiB (100.00%) used: 197.86 GiB (10.6%) 
           fs: ntfs block size: 4096 B dev: /dev/sda1 label: DLNA uuid: 2E7E405E7E402147 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:3 info: Seagate RSS LLC type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 0bc2:6123 Device-2: 2-2:2 info: Western Digital type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 1058:2626 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 0.8% command: deluged started by: python pid: 868 mem: 33.2 MiB (0.8%) 
           2: cpu: 0.6% command: init pid: 1 mem: 8.11 MiB (0.2%) 
           3: cpu: 0.4% command: smartd pid: 1472 mem: 3.10 MiB (0.0%) 
           4: cpu: 0.2% command: redis-server pid: 756 mem: 3.93 MiB (0.0%) 
           5: cpu: 0.2% command: mysqld pid: 757 mem: 91.7 MiB (2.3%) 
           Memory top: 5 
           1: mem: 91.7 MiB (2.3%) command: mysqld pid: 757 cpu: 0.2% 
           2: mem: 33.2 MiB (0.8%) command: deluged started by: python pid: 868 cpu: 0.8% 
           3: mem: 32.8 MiB (0.8%) command: apache2 pid: 853 cpu: 0.0% 
           4: mem: 32.8 MiB (0.8%) command: apache2 pid: 819 cpu: 0.1% 
           5: mem: 32.8 MiB (0.8%) command: apache2 pid: 820 cpu: 0.1% 
Info:      Processes: 155 Uptime: 12m Init: systemd v: 241 runlevel: 3 target: multi-user.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

Benchmark #6860 - Brand: Samsung SD EVO (00000)