Benchmark #69405 - pibenchmarks.com

Brand: Crucial BX500 Series
SSD (2.5" SATA)
#4 / 1,539
1,082
#488 / 1,539
#468 / 875
#125 / 363
6,296
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2023-04-16 09:26:43
#69,405
5,052
-1,244 (-24.62%)
Anonymous
apt --purge remove fio hwinfo libboost-iostreams1.74.0 libboost-thread1.74.0 libdaxctl1 libgfapi0 libgfrpc0 libgfxdr0 libglusterfs0 libhd21 libibverbs1 libndctl6 libpmem1 libpmemblk1

Storage Details
Crucial BX500 Series
SSD (2.5" SATA)
120G
SSD
Crucial
CT120BX500SSD1
2.5 inch
SATA
3.00
5,000
152d:0578
0x152d (JMicron Technology Corp. / JMicron USA Technology Corp.)
0x0578 (JMS578 SATA 6Gb/s)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
N/A
4
1,500
500
4 GB
1,600

Operating System

Debian GNU/Linux 11 (bullseye)
aarch64

Benchmark Results
55.9 MB/s
187.74 MB/s
139.16 MB/s
5,725 IOPS
4,703 IOPS
22,901 KB/s
18,814 KB/s
26,849 KB/s
11,144 KB/s
19,380 KB/s
25,739 KB/s

inxi Results
System: Kernel: 5.10.0-19-arm64 arch: aarch64 bits: 64 compiler: gcc v: 10.2.1 parameters: video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 dma.dmachans=0x37f5 bcm2709.boardrev=0xc03112 bcm2709.serial=0xd0dda799 bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 usb-storage.quirks=152d:0578:u console=tty0 console=ttyS1,115200 root=/dev/sda2 rw fsck.repair=yes net.ifnames=0 rootwait Console: pty pts/0 Distro: Debian GNU/Linux 11 (bullseye) Machine: Type: ARM System: Raspberry Pi 4 Model B Rev 1.2 details: N/A Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.7 GiB used: 503.4 MiB (13.3%) RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 Topology: cpus: 1x cores: 4 smt: cache: L1: 320 KiB desc: d-4x32 KiB! i-4x48 KiB L2: 1024 KiB desc: 1x1024 KiB Speed (MHz): avg: 1100 min/max: 600/1500 scaling: driver: cpufreq-dt governor: schedutil cores: 1: 1100 2: 1100 3: 1100 4: 1100 bogomips: 432 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: mmio_stale_data status: Not affected Type: retbleed status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: No display server data found. Headless machine? tty: 80x40 API: OpenGL Message: GL data unavailable in console for root. Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi API: ALSA v: k5.10.0-19-arm64 status: kernel-api tools: N/A Network: Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: scope: global broadcast: IP v6: scope: link Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq IF-ID-1: docker0 state: down mac: IP v4: scope: global broadcast: IF-ID-2: docker_gwbridge state: down mac: IP v4: scope: global broadcast: IF-ID-3: wlan0 state: down mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: hardware: no software: no address: see --recommends Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial Report: This feature requires one of these tools: hciconfig/bt-adapter Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 111.79 GiB used: 10.61 GiB (9.5%) ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Crucial model: CT120BX500SSD1 family: Micron Client SSDs size: 111.79 GiB block-size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s type: SSD rev: 3102 drive rev: M6CR013 temp: 46 C scheme: MBR SMART: yes state: enabled health: PASSED on: 1y 291d 12h cycles: 1646 written: 1.46 TiB Message: No optical or floppy data found. Partition: ID-1: / raw-size: 80 GiB size: 78.78 GiB (98.48%) used: 10.49 GiB (13.3%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT uuid: 899ea962-703a-49b8-926a-33b14329c638 ID-2: /boot/firmware raw-size: 512 MiB size: 295.8 MiB (57.77%) used: 125.6 MiB (42.5%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: 7F54-1442 Swap: Alert: No swap data was found. Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 1-1.2:3 info: VIA Labs VL813 Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip-ID: 2109:2813 class-ID: 0900 Hub-4: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Hub-5: 2-2:2 info: VIA Labs VL813 Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 2109:0813 class-ID: 0900 Device-1: 2-2.1:3 info: JMicron / USA JMS578 SATA 6Gb/s type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 896mA chip-ID: 152d:0578 class-ID: 0806 Sensors: Src: /sys System Temperatures: cpu: 49.2 C mobo: N/A Fan Speeds (RPM): N/A Repos: Packages: pm: dpkg pkgs: 1068 libs: 628 tools: apt,apt-get Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian bullseye main contrib non-free 2: deb http: //security.debian.org/debian-security bullseye-security main contrib non-free 3: deb http: //deb.debian.org/debian bullseye-backports main Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=arm64 signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https: //download.docker.com/linux/debian bullseye stable Processes: CPU top: 5 of 147 1: cpu: 33.8% command: init pid: 1 mem: 9.72 MiB (0.2%) 2: cpu: 23.7% command: freeradius pid: 707 mem: 89.0 MiB (2.3%) 3: cpu: 1.1% command: [usb-storage] pid: 170 mem: 0.00 MiB (0.0%) 4: cpu: 0.6% command: systemd-journald pid: 237 mem: 10.00 MiB (0.2%) 5: cpu: 0.6% command: dockerd pid: 693 mem: 65.7 MiB (1.7%) Memory top: 5 of 147 1: mem: 89.3 MiB (2.3%) command: mariadbd pid: 613 cpu: 0.5% 2: mem: 89.0 MiB (2.3%) command: freeradius pid: 707 cpu: 23.7% 3: mem: 65.7 MiB (1.7%) command: dockerd pid: 693 cpu: 0.6% 4: mem: 44.0 MiB (1.1%) command: containerd pid: 539 cpu: 0.3% 5: mem: 29.9 MiB (0.7%) command: zabbix_agent2 pid: 536 cpu: 0.4% Info: Processes: 147 Uptime: 3m Init: systemd v: 247 target: graphical (5) default: graphical tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.26

inxi Results

System:
  Kernel: 5.10.0-19-arm64 arch: aarch64 bits: 64 compiler: gcc v: 10.2.1
    parameters: video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48
    dma.dmachans=0x37f5 bcm2709.boardrev=0xc03112 bcm2709.serial=0xd0dda799
    bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0
    smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000
    usb-storage.quirks=152d:0578:u console=tty0 console=ttyS1,115200 root=/dev/sda2 rw
    fsck.repair=yes net.ifnames=0 rootwait
  Console: pty pts/0 Distro: Debian GNU/Linux 11 (bullseye)
Machine:
  Type: ARM System: Raspberry Pi 4 Model B Rev 1.2 details: N/A Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 3.7 GiB used: 503.4 MiB (13.3%)
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0
    stepping: 3
  Topology: cpus: 1x cores: 4 smt:  cache: L1: 320 KiB desc: d-4x32 KiB! i-4x48 KiB
    L2: 1024 KiB desc: 1x1024 KiB
  Speed (MHz): avg: 1100 min/max: 600/1500 scaling: driver: cpufreq-dt governor: schedutil cores:
    1: 1100 2: 1100 3: 1100 4: 1100 bogomips: 432
  Features: asimd cpuid crc32 evtstrm fp
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 status: Vulnerable
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700
    class-ID: hdmi
  Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu
  Display: server: No display server data found. Headless machine? tty: 80x40
  API: OpenGL Message: GL data unavailable in console for root.
Audio:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi
  API: ALSA v: k5.10.0-19-arm64 status: kernel-api tools: N/A
Network:
  Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000
    class-ID: ethernet
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 
  IP v4:  scope: global broadcast: 
  IP v6:  scope: link
  Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A
    chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq
  IF-ID-1: docker0 state: down mac: 
  IP v4:  scope: global broadcast: 
  IF-ID-2: docker_gwbridge state: down mac: 
  IP v4:  scope: global broadcast: 
  IF-ID-3: wlan0 state: down mac: 
  WAN IP: 
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
  Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: hardware: no
    software: no address: see --recommends
  Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial
  Report: This feature requires one of these tools: hciconfig/bt-adapter
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 111.79 GiB used: 10.61 GiB (9.5%)
  ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Crucial model: CT120BX500SSD1
    family: Micron Client SSDs size: 111.79 GiB block-size: physical: 512 B logical: 512 B sata: 3.2
    speed: 6.0 Gb/s type: SSD rev: 3102 drive rev: M6CR013 temp: 46 C scheme: MBR
  SMART: yes state: enabled health: PASSED on: 1y 291d 12h cycles: 1646 written: 1.46 TiB
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 80 GiB size: 78.78 GiB (98.48%) used: 10.49 GiB (13.3%) fs: ext4
    block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT
    uuid: 899ea962-703a-49b8-926a-33b14329c638
  ID-2: /boot/firmware raw-size: 512 MiB size: 295.8 MiB (57.77%) used: 125.6 MiB (42.5%)
    fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: 7F54-1442
Swap:
  Alert: No swap data was found.
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA
    chip-ID: 2109:3431 class-ID: 0900
  Hub-3: 1-1.2:3 info: VIA Labs VL813 Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip-ID: 2109:2813
    class-ID: 0900
  Hub-4: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003
    class-ID: 0900
  Hub-5: 2-2:2 info: VIA Labs VL813 Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 2109:0813
    class-ID: 0900
  Device-1: 2-2.1:3 info: JMicron / USA JMS578 SATA 6Gb/s type: Mass Storage driver: usb-storage
    interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 896mA chip-ID: 152d:0578 class-ID: 0806
    Sensors:
  Src: /sys System Temperatures: cpu: 49.2 C mobo: N/A
  Fan Speeds (RPM): N/A
Repos:
  Packages: pm: dpkg pkgs: 1068 libs: 628 tools: apt,apt-get
  Active apt repos in: /etc/apt/sources.list
    1: deb http: //deb.debian.org/debian bullseye main contrib non-free
    2: deb http: //security.debian.org/debian-security bullseye-security main contrib non-free
    3: deb http: //deb.debian.org/debian bullseye-backports main
  Active apt repos in: /etc/apt/sources.list.d/docker.list
    1: deb [arch=arm64 signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https: //download.docker.com/linux/debian bullseye stable
Processes:
  CPU top: 5 of 147
  1: cpu: 33.8% command: init pid: 1 mem: 9.72 MiB (0.2%)
  2: cpu: 23.7% command: freeradius pid: 707 mem: 89.0 MiB (2.3%)
  3: cpu: 1.1% command: [usb-storage] pid: 170 mem: 0.00 MiB (0.0%)
  4: cpu: 0.6% command: systemd-journald pid: 237 mem: 10.00 MiB (0.2%)
  5: cpu: 0.6% command: dockerd pid: 693 mem: 65.7 MiB (1.7%)
  Memory top: 5 of 147
  1: mem: 89.3 MiB (2.3%) command: mariadbd pid: 613 cpu: 0.5%
  2: mem: 89.0 MiB (2.3%) command: freeradius pid: 707 cpu: 23.7%
  3: mem: 65.7 MiB (1.7%) command: dockerd pid: 693 cpu: 0.6%
  4: mem: 44.0 MiB (1.1%) command: containerd pid: 539 cpu: 0.3%
  5: mem: 29.9 MiB (0.7%) command: zabbix_agent2 pid: 536 cpu: 0.4%
Info:
  Processes: 147 Uptime: 3m Init: systemd v: 247 target: graphical (5) default: graphical
  tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release
  inxi: 3.3.26

Benchmark #69405 - Brand: Crucial BX500 Series