Benchmark #70812 - pibenchmarks.com

Brand: Hikvision USB Engine SSD
SSD (Portable)
#719 / 1,539
5
#557 / 1,539
#537 / 875
#90 / 137
5,985
	AliExpress

Overview
2023-06-10 03:23:05
#70,812
6,114
+129 (+2.11%)
Anonymous
Hikvision 256GB USB 3.0 Flash Drive

Storage Details
Hikvision USB Engine SSD
SSD (Portable)
256G
SSD
Hikvision
HIKSEMIEngine256GB
2.5 inch
SATA
3.20
5,000
152d:0562
0x152d (JMicron Technology Corp. / JMicron USA Technology Corp.)
0x0562 (Netac Portable SSD Z6s)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
N/A
4
1,500
500
1,600

Operating System

Raspbian GNU/Linux 11 (bullseye)
aarch64

Benchmark Results
78 MB/s
299.14 MB/s
293.65 MB/s
4,340 IOPS
14,075 IOPS
17,363 KB/s
56,302 KB/s
31,720 KB/s
20,896 KB/s
15,567 KB/s
31,700 KB/s

inxi Results
System: Host: slave04 Kernel: 6.1.21-v8+ arch: aarch64 bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=8c5f1f0a-02 rootfstype=ext4 fsck.repair=yes rootwait cgroup_memory=1 cgroup_enable=memory ip=192.168.X.X::192.168.X.X:255.255.X.X:slave04:eth0:off Console: pty pts/0 Distro: Raspbian GNU/Linux 11 (bullseye) Machine: Type: ARM System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Battery: Message: No system battery data found. Is one present? Memory: System RAM: available: 3.71 GiB used: 341.1 MiB (9.0%) gpu: 76 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 Topology: cpus: 1x cores: 4 smt: N/A cache: L1: 320 KiB desc: d-4x32 KiB! i-4x48 KiB L2: 1024 KiB desc: 1x1024 KiB Speed (MHz): avg: 1500 min/max: 600/1500 scaling: driver: cpufreq-dt governor: ondemand cores: 1: 1500 2: 1500 3: 1500 4: 1500 bogomips: 432 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: mmio_stale_data status: Not affected Type: retbleed status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: No display server data found. Headless machine? tty: 169x29 API: N/A Message: No display API data available in console. Headless machine? Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi API: ALSA v: k6.1.21-v8+ status: kernel-api tools: alsactl,alsamixer,amixer Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: down mac: XX:XX:XX:XX:XX:XX Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: noprefixroute scope: global broadcast: 192.168.X.X IP v6: fe80::dea6:32ff:fe4a:e687/64 scope: link IF-ID-1: cni0 state: up speed: 10000 Mbps duplex: unknown mac: XX:XX:XX:XX:XX:XX IP v4: 10.42.X.X/24 scope: global broadcast: 10.42.X.X IP v6: fe80::83f:98ff:fe79:be04/64 scope: link IF-ID-2: flannel.1 state: unknown speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX Message: Output throttled. IPs: 3! Limit: 10! Override: --limit [1-x!-1 all] IF-ID-3: veth154f82ac state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-4: veth1e6f7e39 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-5: veth503278bb state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-6: veth61f69dc4 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-7: vethd5bb022d state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IF-ID-8: vethe7eb18a7 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX WAN IP: 102.165.X.X Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: XX:XX:XX:XX:XX:XX bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 17e Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 253.31 GiB used: 111.77 GiB (44.1%) ID-1: /dev/mmcblk0 maj-min: 179:0 model: SB16G size: 14.84 GiB block-size: physical: 512 B logical: 512 B tech: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/sda maj-min: 8:0 model: HIKSEMI Engine 256GB size: 238.47 GiB block-size: physical: 512 B logical: 512 B type: USB rev: 3.2 spd: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1 sata: 3.2 speed: 6.0 Gb/s tech: SSD fw-rev: 5101 drive-rev: T0910A0 temp: 40 C scheme: MBR SMART: yes state: enabled health: PASSED on: 5 hrs cycles: 51 read: 4.4 MiB written: 3.8 MiB Message: No optical or floppy data found. Partition: ID-1: / raw-size: 14.58 GiB size: 14.33 GiB (98.23%) used: 1.91 GiB (13.3%) fs: ext4 block-size: 512 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs uuid: cf2895ca-6dc2-4797-8040-f76ba1508f41 ID-2: /boot raw-size: 256 MiB size: 255 MiB (99.60%) used: 50.4 MiB (19.8%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: bootfs uuid: 9E81-4F92 ID-3: /media raw-size: 238.47 GiB size: 238.46 GiB (100.00%) used: 109.81 GiB (46.0%) fs: exfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: Khoemacau2 uuid: F449-8880 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 2-0:1 info: super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-1:8 info: JMicron / USA JMS567 SATA 6Gb/s bridge type: mass storage driver: uas interfaces: 1 rev: 3.2 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 power: 896mA chip-ID: 152d:0562 class-ID: 0806 Sensors: Src: /sys System Temperatures: cpu: 51.1 C mobo: N/A Fan Speeds (RPM): N/A Repos: Packages: pm: dpkg pkgs: 622 libs: 335 tools: apt,apt-get Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ bullseye main Processes: CPU top: 5 of 179 1: cpu: 3.4% command: k3s pid: 2605 mem: 145.7 MiB (3.8%) 2: cpu: 1.4% command: containerd pid: 2627 mem: 122.1 MiB (3.2%) 3: cpu: 0.2% command: containerd-shim-runc-v2 pid: 3041 mem: 12.4 MiB (0.3%) 4: cpu: 0.2% command: bash pid: 25406 mem: 3.00 MiB (0.0%) 5: cpu: 0.2% command: [kworker/u8:2-flush-8:0] pid: 25425 mem: 0.00 MiB (0.0%) Memory top: 5 of 179 1: mem: 145.7 MiB (3.8%) command: k3s pid: 2605 cpu: 3.4% 2: mem: 122.1 MiB (3.2%) command: containerd pid: 2627 cpu: 1.4% 3: mem: 21.2 MiB (0.5%) command: systemd-journald pid: 1351 cpu: 0.0% 4: mem: 12.6 MiB (0.3%) command: containerd-shim-runc-v2 pid: 29252 cpu: 0.1% 5: mem: 12.4 MiB (0.3%) command: containerd-shim-runc-v2 pid: 29412 cpu: 0.1% Info: Processes: 179 Uptime: 2d 4h 21m Init: systemd v: 247 target: multi-user (3) default: multi-user tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Shell: Storage.sh (sudo) default: Bash v: 5.1.4 running-in: pty pts/0 (SSH) inxi: 3.3.27

inxi Results

System:
  Host: slave04 Kernel: 6.1.21-v8+ arch: aarch64 bits: 32 compiler: N/A
    parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0
    snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0
    smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000
    console=ttyS0,115200 console=tty1 root=PARTUUID=8c5f1f0a-02 rootfstype=ext4 fsck.repair=yes
    rootwait cgroup_memory=1 cgroup_enable=memory
    ip=192.168.X.X::192.168.X.X:255.255.X.X:slave04:eth0:off
  Console: pty pts/0 Distro: Raspbian GNU/Linux 11 (bullseye)
Machine:
  Type: ARM System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111
    Battery:
  Message: No system battery data found. Is one present?
Memory:
  System RAM: available: 3.71 GiB used: 341.1 MiB (9.0%) gpu: 76 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0
    stepping: 3
  Topology: cpus: 1x cores: 4 smt: N/A cache: L1: 320 KiB desc: d-4x32 KiB! i-4x48 KiB
    L2: 1024 KiB desc: 1x1024 KiB
  Speed (MHz): avg: 1500 min/max: 600/1500 scaling: driver: cpufreq-dt governor: ondemand cores:
    1: 1500 2: 1500 3: 1500 4: 1500 bogomips: 432
  Features: asimd cpuid crc32 evtstrm fp
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 status: Vulnerable
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700
    class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700
    class-ID: hdmi
  Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu
  Display: server: No display server data found. Headless machine? tty: 169x29
  API: N/A Message: No display API data available in console. Headless machine?
Audio:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi
  API: ALSA v: k6.1.21-v8+ status: kernel-api tools: alsactl,alsamixer,amixer
Network:
  Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000
    class-ID: mmcnr
  IF: wlan0 state: down mac: XX:XX:XX:XX:XX:XX
  Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
    chip-ID: brcm:fd580000 class-ID: ethernet
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IP v4: 192.168.X.X/24 type: noprefixroute scope: global broadcast: 192.168.X.X
  IP v6: fe80::dea6:32ff:fe4a:e687/64 scope: link
  IF-ID-1: cni0 state: up speed: 10000 Mbps duplex: unknown mac: XX:XX:XX:XX:XX:XX
  IP v4: 10.42.X.X/24 scope: global broadcast: 10.42.X.X
  IP v6: fe80::83f:98ff:fe79:be04/64 scope: link
  IF-ID-2: flannel.1 state: unknown speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  Message: Output throttled. IPs: 3! Limit: 10! Override: --limit [1-x!-1 all]
  IF-ID-3: veth154f82ac state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IF-ID-4: veth1e6f7e39 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IF-ID-5: veth503278bb state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IF-ID-6: veth61f69dc4 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IF-ID-7: vethd5bb022d state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  IF-ID-8: vethe7eb18a7 state: up speed: 10000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX
  WAN IP: 102.165.X.X
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address: XX:XX:XX:XX:XX:XX bt-v: 3.0 lmp-v: 5.0
    sub-v: 6119 hci-v: 5.0 rev: 17e
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 253.31 GiB used: 111.77 GiB (44.1%)
  ID-1: /dev/mmcblk0 maj-min: 179:0 model: SB16G size: 14.84 GiB block-size: physical: 512 B
    logical: 512 B tech: SSD scheme: MBR
  SMART Message: Unknown smartctl error. Unable to generate data.
  ID-2: /dev/sda maj-min: 8:0 model: HIKSEMI Engine 256GB size: 238.47 GiB block-size:
    physical: 512 B logical: 512 B type: USB rev: 3.2 spd: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1
    sata: 3.2 speed: 6.0 Gb/s tech: SSD fw-rev: 5101
    drive-rev: T0910A0 temp: 40 C scheme: MBR
  SMART: yes state: enabled health: PASSED on: 5 hrs cycles: 51 read: 4.4 MiB written: 3.8 MiB
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 14.58 GiB size: 14.33 GiB (98.23%) used: 1.91 GiB (13.3%) fs: ext4
    block-size: 512 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs
    uuid: cf2895ca-6dc2-4797-8040-f76ba1508f41
  ID-2: /boot raw-size: 256 MiB size: 255 MiB (99.60%) used: 50.4 MiB (19.8%) fs: vfat
    block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: bootfs uuid: 9E81-4F92
  ID-3: /media raw-size: 238.47 GiB size: 238.46 GiB (100.00%) used: 109.81 GiB (46.0%)
    fs: exfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: Khoemacau2 uuid: F449-8880
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
    lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s (57.2 MiB/s) lanes: 1
    mode: 2.0 power: 100mA chip-ID: 2109:3431 class-ID: 0900
  Hub-3: 2-0:1 info: super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1
    mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900
  Device-1: 2-1:8 info: JMicron / USA JMS567 SATA 6Gb/s bridge type: mass storage driver: uas
    interfaces: 1 rev: 3.2 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 power: 896mA
    chip-ID: 152d:0562 class-ID: 0806 Sensors:
  Src: /sys System Temperatures: cpu: 51.1 C mobo: N/A
  Fan Speeds (RPM): N/A
Repos:
  Packages: pm: dpkg pkgs: 622 libs: 335 tools: apt,apt-get
  Active apt repos in: /etc/apt/sources.list
    1: deb http://raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-free rpi
  Active apt repos in: /etc/apt/sources.list.d/raspi.list
    1: deb http://archive.raspberrypi.org/debian/ bullseye main
Processes:
  CPU top: 5 of 179
  1: cpu: 3.4% command: k3s pid: 2605 mem: 145.7 MiB (3.8%)
  2: cpu: 1.4% command: containerd pid: 2627 mem: 122.1 MiB (3.2%)
  3: cpu: 0.2% command: containerd-shim-runc-v2 pid: 3041 mem: 12.4 MiB (0.3%)
  4: cpu: 0.2% command: bash pid: 25406 mem: 3.00 MiB (0.0%)
  5: cpu: 0.2% command: [kworker/u8:2-flush-8:0] pid: 25425 mem: 0.00 MiB (0.0%)
  Memory top: 5 of 179
  1: mem: 145.7 MiB (3.8%) command: k3s pid: 2605 cpu: 3.4%
  2: mem: 122.1 MiB (3.2%) command: containerd pid: 2627 cpu: 1.4%
  3: mem: 21.2 MiB (0.5%) command: systemd-journald pid: 1351 cpu: 0.0%
  4: mem: 12.6 MiB (0.3%) command: containerd-shim-runc-v2 pid: 29252 cpu: 0.1%
  5: mem: 12.4 MiB (0.3%) command: containerd-shim-runc-v2 pid: 29412 cpu: 0.1%
Info:
  Processes: 179 Uptime: 2d 4h 21m Init: systemd v: 247 target: multi-user (3) default: multi-user
  tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Shell: Storage.sh (sudo) default: Bash v: 5.1.4
  running-in: pty pts/0 (SSH) inxi: 3.3.27

Benchmark #70812 - Brand: Hikvision USB Engine SSD