Benchmark #7194 - pibenchmarks.com

Brand: PNY CS1311
SSD (2.5" SATA)
#575 / 1,679
14
#639 / 1,679
#616 / 984
#156 / 370
6,284
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-01-19 07:19:51
#7,194
5,328
-956 (-17.94%)
Anonymous

Storage Details
PNY CS1311
SSD (2.5" SATA)
120G
SSD
PNY
CS1311120GBSSD
2.5 inch
SATA
3.00
5,000
1d6b:55aa
0x1d6b (Linux Foundation)
0x55aa (ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
aarch64

Benchmark Results
84.3 MB/s
305.75 MB/s
251.96 MB/s
12,427 IOPS
22,831 IOPS
49,708 KB/s
91,326 KB/s
19,125 KB/s
14,539 KB/s
14,703 KB/s
13,873 KB/s

inxi Results
System: Host: raspberrypi Kernel: 4.19.75-v8+ aarch64 bits: 32 compiler: gcc v: 5.4.0 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.79 GiB used: 328.6 MiB (8.5%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 168x44 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.75-v8+ Network: Message: No ARM data found for this feature. IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link IF-ID-3: vethc8a0ce6 state: up speed: 10000 Mbps duplex: full mac: IF-ID-4: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 3.76 TiB used: 586.90 GiB (15.3%) ID-1: /dev/mmcblk0 model: USD size: 7.47 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: PNY model: CS1311 120GB SSD size: 111.79 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-3: /dev/sdb type: USB vendor: Western Digital model: WD Elements 2621 size: 3.64 TiB block size: physical: 4096 B logical: 512 B rev: 1026 scheme: GPT Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 111.54 GiB size: 109.78 GiB (98.43%) used: 3.22 GiB (2.9%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.8 MiB (20.5%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 ID-3: /media/external raw size: 3.64 TiB size: 3.64 TiB (99.95%) used: 580.41 GiB (15.6%) fs: xfs block size: 4096 B dev: /dev/sdb1 label: N/A uuid: 8ac577ed-4c7c-4462-8ff2-66e080df4f81 ID-4: /var/lib/docker/overlay2/7432c81c8b6964268b2e082e4d0052f210173860c7ebbe79818b0b5acd4b2c15/merged raw size: N/A size: 109.78 GiB used: 3.22 GiB (2.9%) fs: overlay source: ERR-102 label: N/A uuid: N/A Unmounted: ID-1: /dev/mmcblk0p2 size: 7.21 GiB fs: ext4 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 5203-DB74 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.4:3 info: Future Devices FT232 Serial (UART) IC type: driver: ftdi_sio interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 0403:6001 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-2: 2-1:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa Device-3: 2-2:3 info: Western Digital type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 1058:2621 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 1.0% command: init pid: 1 mem: 8.01 MiB (0.2%) 2: cpu: 0.6% command: dockerd pid: 652 mem: 55.8 MiB (1.4%) 3: cpu: 0.4% command: docker-containerd pid: 703 mem: 21.9 MiB (0.5%) 4: cpu: 0.3% command: pihole-ftl pid: 716 mem: 17.6 MiB (0.4%) 5: cpu: 0.3% command: oscam pid: 1501 mem: 2.37 MiB (0.0%) Memory top: 5 1: mem: 55.8 MiB (1.4%) command: dockerd pid: 652 cpu: 0.6% 2: mem: 21.9 MiB (0.5%) command: docker-containerd pid: 703 cpu: 0.4% 3: mem: 17.6 MiB (0.4%) command: pihole-ftl pid: 716 cpu: 0.3% 4: mem: 16.2 MiB (0.4%) command: smbd pid: 694 cpu: 0.0% 5: mem: 13.9 MiB (0.3%) command: php-cgi pid: 692 cpu: 0.0% Info: Processes: 156 Uptime: 10m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: raspberrypi Kernel: 4.19.75-v8+ aarch64 bits: 32 compiler: gcc v: 5.4.0 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.79 GiB used: 328.6 MiB (8.5%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 
           family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 168x44 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.75-v8+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           IF-ID-3: vethc8a0ce6 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-4: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 3.76 TiB used: 586.90 GiB (15.3%) 
           ID-1: /dev/mmcblk0 model: USD size: 7.47 GiB block size: physical: 512 B logical: 512 B 
           scheme: MBR 
           ID-2: /dev/sda type: USB vendor: PNY model: CS1311 120GB SSD size: 111.79 GiB 
           block size: physical: 512 B logical: 512 B scheme: MBR 
           ID-3: /dev/sdb type: USB vendor: Western Digital model: WD Elements 2621 size: 3.64 TiB 
           block size: physical: 4096 B logical: 512 B rev: 1026 scheme: GPT 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 111.54 GiB size: 109.78 GiB (98.43%) used: 3.22 GiB (2.9%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.8 MiB (20.5%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 
           ID-3: /media/external raw size: 3.64 TiB size: 3.64 TiB (99.95%) 
           used: 580.41 GiB (15.6%) fs: xfs block size: 4096 B dev: /dev/sdb1 label: N/A 
           uuid: 8ac577ed-4c7c-4462-8ff2-66e080df4f81 
           ID-4: /var/lib/docker/overlay2/7432c81c8b6964268b2e082e4d0052f210173860c7ebbe79818b0b5acd4b2c15/merged raw size: N/A size: 109.78 GiB used: 3.22 GiB (2.9%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
Unmounted: ID-1: /dev/mmcblk0p2 size: 7.21 GiB fs: ext4 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 5203-DB74 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.4:3 info: Future Devices FT232 Serial (UART) IC type:  
           driver: ftdi_sio interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 0403:6001 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-2: 2-1:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa 
           Device-3: 2-2:3 info: Western Digital type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 1058:2621 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 1.0% command: init pid: 1 mem: 8.01 MiB (0.2%) 
           2: cpu: 0.6% command: dockerd pid: 652 mem: 55.8 MiB (1.4%) 
           3: cpu: 0.4% command: docker-containerd pid: 703 mem: 21.9 MiB (0.5%) 
           4: cpu: 0.3% command: pihole-ftl pid: 716 mem: 17.6 MiB (0.4%) 
           5: cpu: 0.3% command: oscam pid: 1501 mem: 2.37 MiB (0.0%) 
           Memory top: 5 
           1: mem: 55.8 MiB (1.4%) command: dockerd pid: 652 cpu: 0.6% 
           2: mem: 21.9 MiB (0.5%) command: docker-containerd pid: 703 cpu: 0.4% 
           3: mem: 17.6 MiB (0.4%) command: pihole-ftl pid: 716 cpu: 0.3% 
           4: mem: 16.2 MiB (0.4%) command: smbd pid: 694 cpu: 0.0% 
           5: mem: 13.9 MiB (0.3%) command: php-cgi pid: 692 cpu: 0.0% 
Info:      Processes: 156 Uptime: 10m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 
           alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

Benchmark #7194 - Brand: PNY CS1311