Benchmark #71999 - pibenchmarks.com

Brand: SanDisk X400
SSD (2.5" SATA)
#497 / 1,672
17
#777 / 1,672
#750 / 983
#236 / 370
5,535
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2023-08-03 10:11:53
#71,999
6,215
+680 (+10.94%)
Anonymous
256GB SSD on Sabrent SATA to USB Pi4 8GB

Storage Details
SanDisk X400
SSD (2.5" SATA)
256G
SSD
SanDisk
SD8TB8U256G1001
2.5 inch
SATA
3.20
5,000
13fd:3456
0x13fd (Initio Corporation)
0x3456
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.5
Raspberry Pi 4 Model B Rev 1.5
Raspberry Pi Foundation
N/A
4
1,500

Operating System

Debian GNU/Linux 12 (bookworm)
aarch64

Benchmark Results
80 MB/s
300.46 MB/s
154.17 MB/s
7,590 IOPS
17,224 IOPS
30,363 KB/s
68,898 KB/s
22,686 KB/s
20,128 KB/s
15,256 KB/s
29,096 KB/s

inxi Results
perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LC_TERMINAL = "iTerm2", LANG = "en_CA.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). System: Kernel: 6.1.0-10-arm64 arch: aarch64 bits: 64 compiler: gcc v: 12.2.0 parameters: dma.dmachans=0x37f5 bcm2709.boardrev=0xd03115 bcm2709.serial=0x440774fa bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=tty0 console=ttyS1,115200 root=LABEL=RASPIROOT rw fsck.repair=yes net.ifnames=0 rootwait Console: pty pts/0 Distro: Debian GNU/Linux 12 (bookworm) Machine: Type: ARM System: Raspberry Pi 4 Model B Rev 1.5 details: N/A Battery: Message: No system battery data found. Is one present? Memory: System RAM: total: 8 GiB available: 7.62 GiB used: 2.47 GiB (32.4%) RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 Topology: cpus: 1x cores: 4 smt: cache: L1: 320 KiB desc: d-4x32 KiB! i-4x48 KiB L2: 1024 KiB desc: 1x1024 KiB Speed (MHz): avg: 1400 min/max: 600/1500 scaling: driver: cpufreq-dt governor: schedutil cores: 1: 1400 2: 1400 3: 1400 4: 1400 bogomips: 432 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: mmio_stale_data status: Not affected Type: retbleed status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: 2711-v3d driver: v3d v: kernel bus-ID: N/A chip-ID: brcm:fec00000 class-ID: gpu Device-4: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: No display server data found. Headless machine? tty: 80x40 API: N/A Message: No display API data available in console. Headless machine? Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi API: ALSA v: k6.1.0-10-arm64 status: kernel-api tools: N/A Network: Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic scope: global broadcast: IP v6: type: dynamic mngtmpaddr scope: global IP v6: scope: link Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq IF-ID-1: cilium_host state: up speed: 10000 Mbps duplex: full mac: IF-ID-2: cilium_net state: up speed: 10000 Mbps duplex: full mac: IF-ID-3: lxc_health state: up speed: 10000 Mbps duplex: full mac: IF-ID-4: lxced88978b188e state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: lxcf88b5042a628 state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: lxcfe972411411c state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: wlan0 state: down mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: hardware: no software: no address: see --recommends Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial Report: This feature requires one of these tools: hciconfig/bt-adapter Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 356.23 GiB used: 10.18 GiB (2.9%) ID-1: /dev/mmcblk1 maj-min: 179:0 model: USD00 size: 117.75 GiB block-size: physical: 512 B logical: 512 B tech: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/sda maj-min: 8:0 vendor: SanDisk model: SD8TB8U256G1001 size: 238.47 GiB block-size: physical: 512 B logical: 512 B type: USB rev: 3.2 spd: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1 sata: 3.2 speed: 6.0 Gb/s tech: SSD fw-rev: 0056 drive-rev: X4120101 temp: 35 C scheme: MBR SMART: yes state: enabled health: PASSED on: 2y 97d 21h cycles: 342 read: 10.8 MiB written: 6.3 MiB Old-Age: threshold: 1 Message: No optical or floppy data found. Partition: ID-1: / raw-size: 237.97 GiB size: 234.31 GiB (98.46%) used: 10.05 GiB (4.3%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT uuid: 23a77be8-5e7d-4310-bb98-edd61ca33a1e ID-2: /boot/firmware raw-size: 508 MiB size: 507.7 MiB (99.94%) used: 142 MiB (28.0%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: B62D-E64A Swap: Alert: No swap data was found. Unmounted: ID-1: /dev/mmcblk1p1 maj-min: 179:1 size: 256 MiB fs: vfat label: bootfs uuid: 0B22-2966 ID-2: /dev/mmcblk1p2 maj-min: 179:2 size: 117.5 GiB fs: ext4 label: rootfs uuid: 3ad7386b-e1ae-4032-ae33-0c40f5ecc4ac USB: Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 2-0:1 info: super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-1:2 info: Initio SABRENT type: mass storage driver: uas interfaces: 1 rev: 3.2 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 power: 8mA chip-ID: 13fd:3456 class-ID: 0806 Sensors: System Temperatures: cpu: 40.4 C mobo: N/A Fan Speeds (RPM): N/A Repos: Packages: pm: dpkg pkgs: 502 libs: 267 tools: apt,apt-get Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian bookworm main non-free-firmware non-free 2: deb http: //deb.debian.org/debian bookworm-updates main non-free-firmware non-free 3: deb http: //security.debian.org/debian-security bookworm-security main non-free-firmware non-free Processes: CPU top: 5 of 208 1: cpu: 400% command: ps pid: 2934317 mem: 3.95 MiB (0.0%) 2: cpu: 40.0% command: k3s pid: 2722526 mem: 975.5 MiB (12.4%) 3: cpu: 4.8% command: cilium-agent pid: 687554 mem: 170.9 MiB (2.1%) 4: cpu: 2.7% command: containerd pid: 2722557 mem: 134.0 MiB (1.7%) 5: cpu: 1.4% command: containerd-shim-runc-v2 pid: 14206 mem: 19.4 MiB (0.2%) Memory top: 5 of 208 1: mem: 975.5 MiB (12.4%) command: k3s pid: 2722526 cpu: 40.0% 2: mem: 236.2 MiB (3.0%) command: radosgw pid: 15408 cpu: 0.8% 3: mem: 170.9 MiB (2.1%) command: cilium-agent pid: 687554 cpu: 4.8% 4: mem: 134.0 MiB (1.7%) command: containerd pid: 2722557 cpu: 2.7% 5: mem: 70.7 MiB (0.9%) command: cephcsi pid: 16345 cpu: 0.0% Info: Processes: 208 Uptime: 9d 19h 24m Init: systemd v: 252 target: graphical (5) default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12 Client: shell wrapper v: 5.2.15-release inxi: 3.3.28

inxi Results

perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
	LANGUAGE = (unset),
	LC_ALL = (unset),
	LC_TERMINAL = "iTerm2",
	LANG = "en_CA.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
System:
  Kernel: 6.1.0-10-arm64 arch: aarch64 bits: 64 compiler: gcc v: 12.2.0 parameters:
    dma.dmachans=0x37f5 bcm2709.boardrev=0xd03115 bcm2709.serial=0x440774fa
    bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0
    smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000
    console=tty0 console=ttyS1,115200 root=LABEL=RASPIROOT rw fsck.repair=yes net.ifnames=0
    rootwait
  Console: pty pts/0 Distro: Debian GNU/Linux 12 (bookworm)
Machine:
  Type: ARM System: Raspberry Pi 4 Model B Rev 1.5 details: N/A Battery:
  Message: No system battery data found. Is one present?
Memory:
  System RAM: total: 8 GiB available: 7.62 GiB used: 2.47 GiB (32.4%)
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0
    stepping: 3
  Topology: cpus: 1x cores: 4 smt:  cache: L1: 320 KiB desc: d-4x32 KiB! i-4x48 KiB
    L2: 1024 KiB desc: 1x1024 KiB
  Speed (MHz): avg: 1400 min/max: 600/1500 scaling: driver: cpufreq-dt governor: schedutil cores:
    1: 1400 2: 1400 3: 1400 4: 1400 bogomips: 432
  Features: asimd cpuid crc32 evtstrm fp
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 status: Vulnerable
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700
    class-ID: hdmi
  Device-3: 2711-v3d driver: v3d v: kernel bus-ID: N/A chip-ID: brcm:fec00000 class-ID: gpu
  Device-4: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu
  Display: server: No display server data found. Headless machine? tty: 80x40
  API: N/A Message: No display API data available in console. Headless machine?
Audio:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi
  API: ALSA v: k6.1.0-10-arm64 status: kernel-api tools: N/A
Network:
  Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000
    class-ID: ethernet
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 
  IP v4:  type: dynamic scope: global broadcast: 
  IP v6:  type: dynamic mngtmpaddr scope: global
  IP v6:  scope: link
  Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A
    chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq
  IF-ID-1: cilium_host state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-2: cilium_net state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-3: lxc_health state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-4: lxced88978b188e state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-5: lxcf88b5042a628 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-6: lxcfe972411411c state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-7: wlan0 state: down mac: 
  WAN IP: 
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
  Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: hardware: no
    software: no address: see --recommends
  Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial
  Report: This feature requires one of these tools: hciconfig/bt-adapter
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 356.23 GiB used: 10.18 GiB (2.9%)
  ID-1: /dev/mmcblk1 maj-min: 179:0 model: USD00 size: 117.75 GiB block-size: physical: 512 B
    logical: 512 B tech: SSD scheme: MBR
  SMART Message: Unknown smartctl error. Unable to generate data.
  ID-2: /dev/sda maj-min: 8:0 vendor: SanDisk model: SD8TB8U256G1001 size: 238.47 GiB block-size:
    physical: 512 B logical: 512 B type: USB rev: 3.2 spd: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1
    sata: 3.2 speed: 6.0 Gb/s tech: SSD fw-rev: 0056 drive-rev: X4120101
    temp: 35 C scheme: MBR
  SMART: yes state: enabled health: PASSED on: 2y 97d 21h cycles: 342 read: 10.8 MiB
    written: 6.3 MiB Old-Age: threshold: 1
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 237.97 GiB size: 234.31 GiB (98.46%) used: 10.05 GiB (4.3%) fs: ext4
    block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT
    uuid: 23a77be8-5e7d-4310-bb98-edd61ca33a1e
  ID-2: /boot/firmware raw-size: 508 MiB size: 507.7 MiB (99.94%) used: 142 MiB (28.0%) fs: vfat
    block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: B62D-E64A
Swap:
  Alert: No swap data was found.
Unmounted:
  ID-1: /dev/mmcblk1p1 maj-min: 179:1 size: 256 MiB fs: vfat label: bootfs uuid: 0B22-2966
  ID-2: /dev/mmcblk1p2 maj-min: 179:2 size: 117.5 GiB fs: ext4 label: rootfs
    uuid: 3ad7386b-e1ae-4032-ae33-0c40f5ecc4ac
USB:
  Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
    lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s (57.2 MiB/s) lanes: 1
    mode: 2.0 power: 100mA chip-ID: 2109:3431 class-ID: 0900
  Hub-3: 2-0:1 info: super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1
    mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900
  Device-1: 2-1:2 info: Initio SABRENT type: mass storage driver: uas interfaces: 1 rev: 3.2
    speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 power: 8mA chip-ID: 13fd:3456
    class-ID: 0806 Sensors:
  System Temperatures: cpu: 40.4 C mobo: N/A
  Fan Speeds (RPM): N/A
Repos:
  Packages: pm: dpkg pkgs: 502 libs: 267 tools: apt,apt-get
  Active apt repos in: /etc/apt/sources.list
    1: deb http: //deb.debian.org/debian bookworm main non-free-firmware non-free
    2: deb http: //deb.debian.org/debian bookworm-updates main non-free-firmware non-free
    3: deb http: //security.debian.org/debian-security bookworm-security main non-free-firmware non-free
Processes:
  CPU top: 5 of 208
  1: cpu: 400% command: ps pid: 2934317 mem: 3.95 MiB (0.0%)
  2: cpu: 40.0% command: k3s pid: 2722526 mem: 975.5 MiB (12.4%)
  3: cpu: 4.8% command: cilium-agent pid: 687554 mem: 170.9 MiB (2.1%)
  4: cpu: 2.7% command: containerd pid: 2722557 mem: 134.0 MiB (1.7%)
  5: cpu: 1.4% command: containerd-shim-runc-v2 pid: 14206 mem: 19.4 MiB (0.2%)
  Memory top: 5 of 208
  1: mem: 975.5 MiB (12.4%) command: k3s pid: 2722526 cpu: 40.0%
  2: mem: 236.2 MiB (3.0%) command: radosgw pid: 15408 cpu: 0.8%
  3: mem: 170.9 MiB (2.1%) command: cilium-agent pid: 687554 cpu: 4.8%
  4: mem: 134.0 MiB (1.7%) command: containerd pid: 2722557 cpu: 2.7%
  5: mem: 70.7 MiB (0.9%) command: cephcsi pid: 16345 cpu: 0.0%
Info:
  Processes: 208 Uptime: 9d 19h 24m Init: systemd v: 252 target: graphical (5) default: graphical
  tool: systemctl Compilers: gcc: 12.2.0 alt: 12 Client: shell wrapper v: 5.2.15-release
  inxi: 3.3.28

Benchmark #71999 - Brand: SanDisk X400