Benchmark #7279 - pibenchmarks.com

Brand: Corsair Voyager GTX Series
SSD (Portable)
#154 / 1,539
70
#540 / 1,539
#520 / 875
#87 / 137
6,043
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-01-20 12:31:30
#7,279
7,546
+1,503 (+19.92%)
engeen
Corsair Voyager GTX 256GB on Pi 4 USB3

Storage Details
Corsair Voyager GTX Series
SSD (Portable)
256G
SSD
Corsair
VoyagerGTX
less than 1.8 inch
SATA
1b1c:1a0e
0x1b1c (Corsair)
0x1a0e (Voyager GTX)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
181 MB/s
271.8 MB/s
238.57 MB/s
8,597 IOPS
16,253 IOPS
34,391 KB/s
65,015 KB/s
34,661 KB/s
23,700 KB/s
17,970 KB/s
28,810 KB/s

inxi Results
System: Host: 447452017112 Kernel: 4.19.58-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=tty1 root=PARTUUID=b3311e00-02 rootfstype=ext4 elevator=deadline fsck.repair=yes quiet rootwait Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 Memory: RAM: total: 1.97 GiB used: 212.6 MiB (10.5%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 164x65 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.58-v7l+ Network: Device-1: Huawei E353/E3131 type: USB driver: cdc_ether,usb-storage bus ID: 1-1.4:4 chip ID: 12d1:14db IF: eth1 state: up speed: N/A duplex: N/A mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic scope: global broadcast: 192.168.X.X IF-ID-1: can0 state: unknown speed: N/A duplex: N/A mac: N/A IF-ID-2: eth0 state: down mac: XX:XX:XX:XX:XX:XX IF-ID-3: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A IP v4: 10.8.X.X scope: global IF-ID-4: wlan0 state: down mac: XX:XX:XX:XX:XX:XX WAN IP: 188.166.X.X Drives: Local Storage: total: 298.10 GiB used: 4.07 GiB (1.4%) ID-1: /dev/mmcblk0 model: EC2QT size: 59.62 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: Corsair model: Voyager GTX size: 238.47 GiB block size: physical: 512 B logical: 512 B scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 238.22 GiB size: 234.23 GiB (98.33%) used: 4.03 GiB (1.7%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: N/A uuid: 909f0ebf-5bb0-4521-8085-bbfff2041586 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 40.1 MiB (15.9%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: F661-303B Unmounted: ID-1: /dev/mmcblk0p2 size: 59.37 GiB fs: ext4 label: rootfs uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: N/A uuid: BF03-8684 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.4:4 info: Huawei E353/E3131 type: Ethernet Network,CDC-Data,Mass Storage driver: cdc_ether,usb-storage interfaces: 3 rev: 2.1 speed: 480 Mb/s chip ID: 12d1:14db Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-2: 2-1:2 info: Corsair type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 1b1c:1a0e Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 1.7% command: openvpn pid: 1373 mem: 5.67 MiB (0.2%) 2: cpu: 1.4% command: ./run pid: 454 mem: 6.20 MiB (0.3%) 3: cpu: 1.1% command: init pid: 1 mem: 8.04 MiB (0.4%) 4: cpu: 0.6% command: systemd-journald pid: 112 mem: 9.49 MiB (0.4%) 5: cpu: 0.5% command: sudo pid: 9798 mem: 3.07 MiB (0.1%) Memory top: 5 1: mem: 18.3 MiB (0.9%) command: sync.php started by: php pid: 6049 cpu: 0.2% 2: mem: 12.9 MiB (0.6%) command: networkmanager pid: 406 cpu: 0.1% 3: mem: 9.49 MiB (0.4%) command: systemd-journald pid: 112 cpu: 0.6% 4: mem: 8.04 MiB (0.4%) command: init pid: 1 cpu: 1.1% 5: mem: 7.66 MiB (0.3%) command: modemmanager pid: 398 cpu: 0.0% Info: Processes: 306 Uptime: 9m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 clang: 7.0.1-8+rpi2 Shell: Storage.sh (sudo) inxi: 3.0.37

inxi Results

System:    Host: 447452017112 Kernel: 4.19.58-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=tty1 root=PARTUUID=b3311e00-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes quiet rootwait 
           Console: N/A dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 
Memory:    RAM: total: 1.97 GiB used: 212.6 MiB (10.5%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A 
           stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 164x65 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.58-v7l+ 
Network:   Device-1: Huawei E353/E3131 type: USB driver: cdc_ether,usb-storage bus ID: 1-1.4:4 chip ID: 12d1:14db 
           IF: eth1 state: up speed: N/A duplex: N/A mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: dynamic scope: global broadcast: 192.168.X.X 
           IF-ID-1: can0 state: unknown speed: N/A duplex: N/A mac: N/A 
           IF-ID-2: eth0 state: down mac: XX:XX:XX:XX:XX:XX 
           IF-ID-3: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A 
           IP v4: 10.8.X.X scope: global 
           IF-ID-4: wlan0 state: down mac: XX:XX:XX:XX:XX:XX 
           WAN IP: 188.166.X.X 
Drives:    Local Storage: total: 298.10 GiB used: 4.07 GiB (1.4%) 
           ID-1: /dev/mmcblk0 model: EC2QT size: 59.62 GiB block size: physical: 512 B logical: 512 B 
           scheme: MBR 
           ID-2: /dev/sda type: USB vendor: Corsair model: Voyager GTX size: 238.47 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 238.22 GiB size: 234.23 GiB (98.33%) used: 4.03 GiB (1.7%) fs: ext4 block size: 4096 B 
           dev: /dev/sda2 label: N/A uuid: 909f0ebf-5bb0-4521-8085-bbfff2041586 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 40.1 MiB (15.9%) fs: vfat block size: 512 B 
           dev: /dev/mmcblk0p1 label: boot uuid: F661-303B 
Unmounted: ID-1: /dev/mmcblk0p2 size: 59.37 GiB fs: ext4 label: rootfs uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: N/A uuid: BF03-8684 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.4:4 info: Huawei E353/E3131 type: Ethernet Network,CDC-Data,Mass Storage 
           driver: cdc_ether,usb-storage interfaces: 3 rev: 2.1 speed: 480 Mb/s chip ID: 12d1:14db 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 
           Device-2: 2-1:2 info: Corsair type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1b1c:1a0e 
           Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 1.7% command: openvpn pid: 1373 mem: 5.67 MiB (0.2%) 
           2: cpu: 1.4% command: ./run pid: 454 mem: 6.20 MiB (0.3%) 
           3: cpu: 1.1% command: init pid: 1 mem: 8.04 MiB (0.4%) 
           4: cpu: 0.6% command: systemd-journald pid: 112 mem: 9.49 MiB (0.4%) 
           5: cpu: 0.5% command: sudo pid: 9798 mem: 3.07 MiB (0.1%) 
           Memory top: 5 
           1: mem: 18.3 MiB (0.9%) command: sync.php started by: php pid: 6049 cpu: 0.2% 
           2: mem: 12.9 MiB (0.6%) command: networkmanager pid: 406 cpu: 0.1% 
           3: mem: 9.49 MiB (0.4%) command: systemd-journald pid: 112 cpu: 0.6% 
           4: mem: 8.04 MiB (0.4%) command: init pid: 1 cpu: 1.1% 
           5: mem: 7.66 MiB (0.3%) command: modemmanager pid: 398 cpu: 0.0% 
Info:      Processes: 306 Uptime: 9m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 clang: 7.0.1-8+rpi2 
           Shell: Storage.sh (sudo) inxi: 3.0.37

Benchmark #7279 - Brand: Corsair Voyager GTX Series