Benchmark #7344 - pibenchmarks.com

Brand: QEMU Virtual Hard Disk
Virtual
#62 / 1,665
255
#1,602 / 1,665
#0 / 93
#0 / 13
0
	Amazon.com

Overview
2020-01-21 15:03:46
#7,344
20,987
+20,987 (+100.00%)
Anonymous
MinecraftNerds Linode Server

Storage Details
QEMU Virtual Hard Disk
Virtual
49.5G
USB Flash
QEMU
QEMUHARDDISK
None

System Board Details

QEMU Standard PC (Q35 + ICH9, 2009)
Standard PC (Q35 + ICH9, 2009)
QEMU
2,000
N/A
N/A

Operating System

Ubuntu 18.04.3 LTS
x86_64

Benchmark Results
614 MB/s
1079.08 MB/s
1227.62 MB/s
48,416 IOPS
91,428 IOPS
193,664 KB/s
365,714 KB/s
43,337 KB/s
43,991 KB/s
22,190 KB/s
44,403 KB/s

inxi Results
System: Host: MCServer Kernel: 4.15.0-50-generic x86_64 bits: 64 compiler: gcc v: 7.3.0 parameters: BOOT_IMAGE=/boot/vmlinuz-4.15.0-50-generic root=/dev/sda ro console=ttyS0,19200n8 net.ifnames=0 Console: tty 0 dm: N/A Distro: Ubuntu 18.04.3 LTS (Bionic Beaver) Machine: Type: Kvm System: QEMU product: Standard PC (Q35 + ICH9, 2009) v: pc-q35-3.1 N/A Chassis: type: 1 v: pc-q35-3.1 N/A Mobo: N/A model: N/A N/A BIOS: SeaBIOS v: rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org date: 04/01/2014 Memory: RAM: total: 1.95 GiB used: 140.2 MiB (7.0%) Array-1: capacity: 2 GiB slots: 1 EC: Multi-bit ECC max module size: 2 GiB note: est. Device-1: DIMM 0 size: 2 GiB speed: Unknown type: RAM detail: other bus width: Unknown total: Unknown manufacturer: QEMU part-no: Not Specified Slots: Message: No PCI slot data found. CPU: Topology: Single Core model: Intel Xeon E5-2697 v4 bits: 64 type: MCP arch: Broadwell family: 6 model-id: 4F (79) stepping: 1 microcode: 1 L2 cache: 16.0 MiB bogomips: 4599 Speed: 2300 MHz min/max: N/A Core speed (MHz): 1: 2300 Flags: 3dnowprefetch abm adx aes apic arat arch_perfmon avx avx2 bmi1 bmi2 clflush cmov constant_tsc cpuid cpuid_fault cx16 cx8 de erms f16c fma fpu fsgsbase fxsr hle hypervisor ibpb ibrs invpcid invpcid_single lahf_lm lm mca mce mmx movbe msr mtrr nopl nx pae pat pcid pclmulqdq pdpe1gb pge pni popcnt pse pse36 pti rdrand rdseed rdtscp rep_good rtm sep smap smep ss ssbd sse sse2 sse4_1 sse4_2 ssse3 syscall tsc tsc_adjust tsc_deadline_timer tsc_known_freq vme x2apic xsave xsaveopt xtopology Vulnerabilities: Type: l1tf mitigation: PTE Inversion Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode! SMT Host state unknown Type: meltdown mitigation: PTI Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl and seccomp Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional, IBRS_FW, STIBP: disabled, RSB filling Graphics: Device-1: vendor: Red Hat driver: N/A bus ID: 00:01.0 chip ID: 1234:1111 Display: server: No display server data found. Headless machine? tty: 120x30 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Message: No Device data found. Network: Device-1: Red Hat Virtio network driver: virtio-pci v: N/A port: c0c0 bus ID: 00:04.0 chip ID: 1af4:1000 IF: eth0 state: up speed: -1 duplex: unknown mac: IP v4: scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link WAN IP: No WAN IP data found. Connected to the web? SSL issues? Drives: Local Storage: total: 50.00 GiB used: 2.40 GiB (4.8%) ID-1: /dev/sda vendor: QEMU model: HARDDISK size: 49.50 GiB block size: physical: 512 B logical: 512 B rev: 2.5+ ID-2: /dev/sdb vendor: QEMU model: HARDDISK size: 512.0 MiB block size: physical: 512 B logical: 512 B speed: rev: 2.5+ Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 49.50 GiB size: 48.68 GiB (98.34%) used: 2.40 GiB (4.9%) fs: ext4 block size: 4096 B dev: /dev/sda label: N/A uuid: 067b3ec0-db3b-4dd8-86f8-f7769e7285c1 ID-2: swap-1 size: 512.0 MiB used: 0 KiB (0.0%) fs: swap swappiness: 60 (default) cache pressure: 100 (default) dev: /dev/sdb label: N/A uuid: 51e994a7-c8d2-4771-aa6e-6e9078b369c1 Unmounted: Message: No unmounted partitions found. USB: Message: No USB data was found. Server? Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //mirrors.linode.com/ubuntu/ bionic main restricted 2: deb http: //mirrors.linode.com/ubuntu/ bionic-updates main restricted 3: deb http: //mirrors.linode.com/ubuntu/ bionic universe 4: deb http: //mirrors.linode.com/ubuntu/ bionic-updates universe 5: deb http: //mirrors.linode.com/ubuntu/ bionic multiverse 6: deb http: //mirrors.linode.com/ubuntu/ bionic-updates multiverse 7: deb http: //mirrors.linode.com/ubuntu/ bionic-backports main restricted universe multiverse 8: deb http: //security.ubuntu.com/ubuntu bionic-security main restricted 9: deb http: //security.ubuntu.com/ubuntu bionic-security universe 10: deb http: //security.ubuntu.com/ubuntu bionic-security multiverse Processes: CPU top: 5 1: cpu: 0.7% command: init pid: 1 mem: 8.62 MiB (0.4%) 2: cpu: 0.3% command: [kworker/u2:0] pid: 1694 mem: 0.00 MiB (0.0%) 3: cpu: 0.3% command: sshd: pid: 2590 mem: 6.95 MiB (0.3%) 4: cpu: 0.1% command: systemd-networkd pid: 477 mem: 5.13 MiB (0.2%) 5: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 19.8 MiB (0.9%) command: unattended-upgrade-shutdown started by: python3 pid: 627 cpu: 0.0% 2: mem: 16.8 MiB (0.8%) command: networkd-dispatcher started by: python3 pid: 618 cpu: 0.0% 3: mem: 14.4 MiB (0.7%) command: systemd-journald pid: 408 cpu: 0.0% 4: mem: 8.62 MiB (0.4%) command: init pid: 1 cpu: 0.7% 5: mem: 7.10 MiB (0.3%) command: sshd: pid: 928 cpu: 0.0% Info: Processes: 103 Uptime: 5m Init: systemd v: 237 runlevel: 5 Compilers: gcc: N/A Client: shell wrapper v: 4.4.20-release inxi: 3.0.37

inxi Results

System:    Host: MCServer Kernel: 4.15.0-50-generic x86_64 bits: 64 compiler: gcc v: 7.3.0 
           parameters: BOOT_IMAGE=/boot/vmlinuz-4.15.0-50-generic root=/dev/sda ro 
           console=ttyS0,19200n8 net.ifnames=0 
           Console: tty 0 dm: N/A Distro: Ubuntu 18.04.3 LTS (Bionic Beaver) 
Machine:   Type: Kvm System: QEMU product: Standard PC (Q35 + ICH9, 2009) v: pc-q35-3.1 
           N/A Chassis: type: 1 v: pc-q35-3.1 N/A 
           Mobo: N/A model: N/A N/A BIOS: SeaBIOS 
           v: rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org date: 04/01/2014 
Memory:    RAM: total: 1.95 GiB used: 140.2 MiB (7.0%) 
           Array-1: capacity: 2 GiB slots: 1 EC: Multi-bit ECC max module size: 2 GiB note: est. 
           Device-1: DIMM 0 size: 2 GiB speed: Unknown type: RAM detail: other bus width: Unknown 
           total: Unknown manufacturer: QEMU part-no: Not Specified Slots: Message: No PCI slot data found. 
CPU:       Topology: Single Core model: Intel Xeon E5-2697 v4 bits: 64 type: MCP arch: Broadwell 
           family: 6 model-id: 4F (79) stepping: 1 microcode: 1 L2 cache: 16.0 MiB bogomips: 4599 
           Speed: 2300 MHz min/max: N/A Core speed (MHz): 1: 2300 
           Flags: 3dnowprefetch abm adx aes apic arat arch_perfmon avx avx2 bmi1 bmi2 clflush cmov 
           constant_tsc cpuid cpuid_fault cx16 cx8 de erms f16c fma fpu fsgsbase fxsr hle 
           hypervisor ibpb ibrs invpcid invpcid_single lahf_lm lm mca mce mmx movbe msr mtrr nopl 
           nx pae pat pcid pclmulqdq pdpe1gb pge pni popcnt pse pse36 pti rdrand rdseed rdtscp 
           rep_good rtm sep smap smep ss ssbd sse sse2 sse4_1 sse4_2 ssse3 syscall tsc tsc_adjust 
           tsc_deadline_timer tsc_known_freq vme x2apic xsave xsaveopt xtopology 
           Vulnerabilities: Type: l1tf mitigation: PTE Inversion 
           Type: mds 
           status: Vulnerable: Clear CPU buffers attempted, no microcode! SMT Host state unknown 
           Type: meltdown mitigation: PTI 
           Type: spec_store_bypass 
           mitigation: Speculative Store Bypass disabled via prctl and seccomp 
           Type: spectre_v1 mitigation: __user pointer sanitization 
           Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional, IBRS_FW, STIBP: 
           disabled, RSB filling 
Graphics:  Device-1: vendor: Red Hat driver: N/A bus ID: 00:01.0 chip ID: 1234:1111 
           Display: server: No display server data found. Headless machine? tty: 120x30 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Message: No Device data found. 
Network:   Device-1: Red Hat Virtio network driver: virtio-pci v: N/A port: c0c0 bus ID: 00:04.0 
           chip ID: 1af4:1000 
           IF: eth0 state: up speed: -1 duplex: unknown mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           WAN IP: No WAN IP data found. Connected to the web? SSL issues? 
Drives:    Local Storage: total: 50.00 GiB used: 2.40 GiB (4.8%) 
           ID-1: /dev/sda vendor: QEMU model: HARDDISK size: 49.50 GiB block size: physical: 512 B 
           logical: 512 B rev: 2.5+ 
           ID-2: /dev/sdb vendor: QEMU model: HARDDISK size: 512.0 MiB block size: physical: 512 B 
           logical: 512 B speed:  rev: 2.5+ 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 49.50 GiB size: 48.68 GiB (98.34%) used: 2.40 GiB (4.9%) fs: ext4 
           block size: 4096 B dev: /dev/sda label: N/A uuid: 067b3ec0-db3b-4dd8-86f8-f7769e7285c1 
           ID-2: swap-1 size: 512.0 MiB used: 0 KiB (0.0%) fs: swap swappiness: 60 (default) 
           cache pressure: 100 (default) dev: /dev/sdb label: N/A 
           uuid: 51e994a7-c8d2-4771-aa6e-6e9078b369c1 
Unmounted: Message: No unmounted partitions found. 
USB:       Message: No USB data was found. Server? 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //mirrors.linode.com/ubuntu/ bionic main restricted
           2: deb http: //mirrors.linode.com/ubuntu/ bionic-updates main restricted
           3: deb http: //mirrors.linode.com/ubuntu/ bionic universe
           4: deb http: //mirrors.linode.com/ubuntu/ bionic-updates universe
           5: deb http: //mirrors.linode.com/ubuntu/ bionic multiverse
           6: deb http: //mirrors.linode.com/ubuntu/ bionic-updates multiverse
           7: deb http: //mirrors.linode.com/ubuntu/ bionic-backports main restricted universe multiverse
           8: deb http: //security.ubuntu.com/ubuntu bionic-security main restricted
           9: deb http: //security.ubuntu.com/ubuntu bionic-security universe
           10: deb http: //security.ubuntu.com/ubuntu bionic-security multiverse
Processes: CPU top: 5 
           1: cpu: 0.7% command: init pid: 1 mem: 8.62 MiB (0.4%) 
           2: cpu: 0.3% command: [kworker/u2:0] pid: 1694 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.3% command: sshd: pid: 2590 mem: 6.95 MiB (0.3%) 
           4: cpu: 0.1% command: systemd-networkd pid: 477 mem: 5.13 MiB (0.2%) 
           5: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 19.8 MiB (0.9%) command: unattended-upgrade-shutdown started by: python3 
           pid: 627 cpu: 0.0% 
           2: mem: 16.8 MiB (0.8%) command: networkd-dispatcher started by: python3 pid: 618 
           cpu: 0.0% 
           3: mem: 14.4 MiB (0.7%) command: systemd-journald pid: 408 cpu: 0.0% 
           4: mem: 8.62 MiB (0.4%) command: init pid: 1 cpu: 0.7% 
           5: mem: 7.10 MiB (0.3%) command: sshd: pid: 928 cpu: 0.0% 
Info:      Processes: 103 Uptime: 5m Init: systemd v: 237 runlevel: 5 Compilers: gcc: N/A 
           Client: shell wrapper v: 4.4.20-release inxi: 3.0.37

Benchmark #7344 - Brand: QEMU Virtual Hard Disk