Benchmark #73941 - pibenchmarks.com

Brand: Samsung eMMC (AJTD4)
MMC (Embedded)
#103 / 1,672
147
#799 / 1,672
#19 / 75
#19 / 92
5,439

Overview
2023-10-24 05:51:57
#73,941
5,308
-131 (-2.47%)
Oratek
Transcend TS128GMTE452T on TOFU+

Storage Details
Samsung eMMC (AJTD4)
MMC (Embedded)
14.3G
MMC
Samsung
AJTD4
Embedded
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi Compute Module 4 1.0
Raspberry Pi Compute Module 4 Rev 1.0
Raspberry Pi Foundation
N/A
4
1,500
500
1,600

Operating System

Raspbian GNU/Linux 11 (bullseye)
aarch64

Benchmark Results
52.7 MB/s
10,000 IOPS
7,571 IOPS
40,000 KB/s
30,284 KB/s
21,496 KB/s
23,079 KB/s
23,032 KB/s
21,061 KB/s

inxi Results
System: Kernel: 6.1.32-v8+ arch: aarch64 bits: 32 compiler: N/A clocksource: arch_sys_counter parameters: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 video=HDMI-A-1:1920x1080M@60 video=HDMI-A-2:640x480M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=200855a8-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 1 wm: Mutter v: 3.38.6 DM: LightDM v: 1.26.0 Distro: Raspbian GNU/Linux 11 (bullseye) Machine: Type: ARM System: Raspberry Pi Compute Module 4 Rev 1.0 details: BCM2835 rev: b03140 Battery: Message: No system battery data found. Is one present? Memory: System RAM: total: 2 GiB note: est. available: 1.76 GiB used: 635.6 MiB (35.3%) igpu: 128 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 Topology: cpus: 1x cores: 4 smt: N/A cache: L1: 320 KiB desc: d-4x32 KiB! i-4x48 KiB L2: 1024 KiB desc: 1x1024 KiB Speed (MHz): avg: 1500 min/max: 600/1500 scaling: driver: cpufreq-dt governor: ondemand cores: 1: 1500 2: 1500 3: 1500 4: 1500 bogomips: 432 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: mmio_stale_data status: Not affected Type: retbleed status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: x11 server: X.org v: 1.20.11 with: Xwayland compositor: Mutter v: 3.38.6 driver: X: loaded: modesetting unloaded: fbdev dri: vc4 gpu: vc4-drm,vc4_crtc,vc4_dpi,vc4_dsi,vc4_firmware_kms,vc4_hdmi,vc4_hvs,vc4_txp,vc4_v3d,vc4_vec display-ID: :0 screens: 1 Screen-1: 0 s-res: 3840x1080 s-size: Monitor-1: HDMI-A-1 mapped: HDMI-1 pos: primary,left model: Samsung LF24T35 built: 2020 res: 1920x1080 hz: 60 dpi: 92 gamma: 1.2 chroma: red: x: 0.639 y: 0.357 green: x: 0.302 y: 0.631 blue: x: 0.145 y: 0.051 white: x: 0.314 y: 0.329 size: 528x297mm (20.79x11.69") diag: 606mm (23.9") ratio: 16:9 modes: 1920x1080, 1680x1050, 1600x900, 1280x1024, 1440x900, 1280x800, 1152x864, 1280x720, 1024x768, 832x624, 800x600, 720x576, 720x480, 640x480, 720x400 Monitor-2: HDMI-A-2 mapped: HDMI-2 pos: right model: Lenovo LEN L1950wD built: 2011 res: 1920x1080 hz: 60 dpi: 191 gamma: 1.2 chroma: red: x: 0.639 y: 0.333 green: x: 0.286 y: 0.600 blue: x: 0.153 y: 0.075 white: x: 0.314 y: 0.329 size: 255x255mm (10.04x10.04") diag: 485mm (19.1") ratio: 16:10, 3:2 modes: 1920x1080, 1920x1080i, 1280x1024, 1440x900, 1152x864, 1280x720, 1024x768, 832x624, 800x600, 720x576, 720x576i, 720x480, 720x480i, 640x480, 720x400 API: OpenGL Message: Unable to show GL data. glxinfo is missing. Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi API: ALSA v: k6.1.32-v8+ status: kernel-api tools: alsactl,alsamixer,amixer Server-1: PipeWire v: 0.3.19 status: n/a (root, process) with: 1: pipewire-pulse status: off 2: pipewire-media-session status: active tools: pw-cat,pw-cli Server-2: PulseAudio v: 14.2 status: active (root, process) tools: pacat,pactl Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 0 state: up address: bt-v: 5.0 lmp-v: 9 sub-v: 6119 hci-v: 9 rev: 17e class-ID: 2c0000 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept service-classes: rendering, capturing, audio Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 133.8 GiB used: 4.43 GiB (3.3%) SMART Message: Required tool smartctl not installed. Check --recommends ID-1: /dev/mmcblk0 maj-min: 179:0 model: AJTD4R size: 14.56 GiB block-size: physical: 512 B logical: 512 B tech: SSD fw-rev: 0x8 scheme: MBR ID-2: /dev/nvme0n1 maj-min: 259:0 vendor: Transcend model: TS128GMTE452T size: 119.24 GiB block-size: physical: 512 B logical: 512 B speed: 15.8 Gb/s lanes: 2 tech: SSD fw-rev: 52B9T7OA Message: No optical or floppy data found. Partition: ID-1: / raw-size: 14.31 GiB size: 14.01 GiB (97.93%) used: 4.38 GiB (31.2%) fs: ext4 block-size: 512 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs uuid: eaaa4faa-eab6-400c-950f-dc96ae4e0400 ID-2: /boot raw-size: 256 MiB size: 255 MiB (99.60%) used: 51.9 MiB (20.3%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: bootfs uuid: C336-AC83 ID-3: /ssd raw-size: 119.24 GiB size: 116.81 GiB (97.96%) used: 24 KiB (0.0%) fs: ext4 block-size: 512 B dev: /dev/nvme0n1 maj-min: 259:0 label: N/A uuid: 5a883d6e-ff3c-4a0e-8499-090f8157faf2 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: no ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0boot0 maj-min: 179:32 size: 4 MiB fs: N/A label: N/A uuid: N/A ID-2: /dev/mmcblk0boot1 maj-min: 179:64 size: 4 MiB fs: N/A label: N/A uuid: N/A USB: Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: Microchip (formerly SMSC) Hub ports: 7 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 2mA chip-ID: 0424:2517 class-ID: 0900 Device-1: 1-1.2:3 info: Logitech M105 Optical Mouse type: mouse driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s (183 KiB/s) lanes: 1 mode: 1.0 power: 100mA chip-ID: 046d:c077 class-ID: 0301 Device-2: 1-1.4:4 info: D-WAV Scientific WS170120 type: HID driver: hid-multitouch,usbhid interfaces: 1 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 100mA chip-ID: 0eef:0005 class-ID: 0300 Device-3: 1-1.7:5 info: Logitech USB Keyboard type: keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s (183 KiB/s) lanes: 1 mode: 1.0 power: 90mA chip-ID: 046d:c34b class-ID: 0300 Sensors: Src: /sys System Temperatures: cpu: 57.9 C mobo: N/A Fan Speeds (rpm): N/A Repos: Packages: pm: dpkg pkgs: 1441 libs: 759 tools: apt,apt-get Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/coral-edgetpu.list 1: deb https: //packages.cloud.google.com/apt coral-edgetpu-stable main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ bullseye main Processes: CPU top: 5 of 220 1: cpu: 24.4% command: chromium-browser pid: 1799 mem: 166.0 MiB (9.2%) 2: cpu: 14.0% command: chromium-browser pid: 1939 mem: 115.5 MiB (6.4%) 3: cpu: 9.7% command: chromium-browser pid: 1849 mem: 101.3 MiB (5.6%) 4: cpu: 6.3% command: chromium-browser pid: 2006 mem: 108.7 MiB (6.0%) 5: cpu: 5.9% command: xorg pid: 506 mem: 60.2 MiB (3.3%) Memory top: 5 of 220 1: mem: 166.0 MiB (9.2%) command: chromium-browser pid: 1799 cpu: 24.4% 2: mem: 115.5 MiB (6.4%) command: chromium-browser pid: 1939 cpu: 14.0% 3: mem: 108.7 MiB (6.0%) command: chromium-browser pid: 2006 cpu: 6.3% 4: mem: 101.3 MiB (5.6%) command: chromium-browser pid: 1849 cpu: 9.7% 5: mem: 69.9 MiB (3.8%) command: chromium-browser pid: 1854 cpu: 1.4% Info: Processes: 220 Uptime: 3m Init: systemd v: 247 target: graphical (5) default: graphical tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.30

inxi Results

System:
  Kernel: 6.1.32-v8+ arch: aarch64 bits: 32 compiler: N/A clocksource: arch_sys_counter
    parameters: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0
    snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 video=HDMI-A-1:1920x1080M@60
    video=HDMI-A-2:640x480M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000
    vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=200855a8-02
    rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
  Console: tty 1 wm: Mutter v: 3.38.6 DM: LightDM v: 1.26.0 Distro: Raspbian GNU/Linux 11
    (bullseye)
Machine:
  Type: ARM System: Raspberry Pi Compute Module 4 Rev 1.0 details: BCM2835 rev: b03140
    Battery:
  Message: No system battery data found. Is one present?
Memory:
  System RAM: total: 2 GiB note: est. available: 1.76 GiB used: 635.6 MiB (35.3%) igpu: 128 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0
    stepping: 3
  Topology: cpus: 1x cores: 4 smt: N/A cache: L1: 320 KiB desc: d-4x32 KiB! i-4x48 KiB
    L2: 1024 KiB desc: 1x1024 KiB
  Speed (MHz): avg: 1500 min/max: 600/1500 scaling: driver: cpufreq-dt governor: ondemand cores:
    1: 1500 2: 1500 3: 1500 4: 1500 bogomips: 432
  Features: asimd cpuid crc32 evtstrm fp
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 status: Vulnerable
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700
    class-ID: hdmi
  Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu
  Display: x11 server: X.org v: 1.20.11 with: Xwayland compositor: Mutter v: 3.38.6 driver: X:
    loaded: modesetting unloaded: fbdev dri: vc4
    gpu: vc4-drm,vc4_crtc,vc4_dpi,vc4_dsi,vc4_firmware_kms,vc4_hdmi,vc4_hvs,vc4_txp,vc4_v3d,vc4_vec
    display-ID: :0 screens: 1
  Screen-1: 0 s-res: 3840x1080 s-size: 
  Monitor-1: HDMI-A-1 mapped: HDMI-1 pos: primary,left model: Samsung LF24T35 built: 2020 res: 1920x1080 hz: 60 dpi: 92 gamma: 1.2 chroma: red: x: 0.639 y: 0.357 green:
    x: 0.302 y: 0.631 blue: x: 0.145 y: 0.051 white: x: 0.314 y: 0.329
    size: 528x297mm (20.79x11.69") diag: 606mm (23.9") ratio: 16:9 modes: 1920x1080, 1680x1050,
    1600x900, 1280x1024, 1440x900, 1280x800, 1152x864, 1280x720, 1024x768, 832x624, 800x600,
    720x576, 720x480, 640x480, 720x400
  Monitor-2: HDMI-A-2 mapped: HDMI-2 pos: right model: Lenovo LEN L1950wD built: 2011 res: 1920x1080 hz: 60 dpi: 191 gamma: 1.2 chroma: red: x: 0.639 y: 0.333 green:
    x: 0.286 y: 0.600 blue: x: 0.153 y: 0.075 white: x: 0.314 y: 0.329
    size: 255x255mm (10.04x10.04") diag: 485mm (19.1") ratio: 16:10, 3:2 modes: 1920x1080,
    1920x1080i, 1280x1024, 1440x900, 1152x864, 1280x720, 1024x768, 832x624, 800x600, 720x576,
    720x576i, 720x480, 720x480i, 640x480, 720x400
  API: OpenGL Message: Unable to show GL data. glxinfo is missing.
Audio:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi
  API: ALSA v: k6.1.32-v8+ status: kernel-api tools: alsactl,alsamixer,amixer
  Server-1: PipeWire v: 0.3.19 status: n/a (root, process) with: 1: pipewire-pulse status: off
    2: pipewire-media-session status: active tools: pw-cat,pw-cli
  Server-2: PulseAudio v: 14.2 status: active (root, process) tools: pacat,pactl
Network:
  Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000
    class-ID: mmcnr
  IF: wlan0 state: up mac: 
  IP v4:  type: dynamic noprefixroute scope: global broadcast: 
  IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global
  IP v6:  scope: link
  Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000
    class-ID: ethernet
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 
  IP v4:  type: dynamic noprefixroute scope: global broadcast: 
  IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global
  IP v6:  scope: link
  WAN IP: 
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
  Report: hciconfig ID: hci0 rfk-id: 0 state: up address:  bt-v: 5.0 lmp-v: 9 sub-v: 6119
    hci-v: 9 rev: 17e class-ID: 2c0000
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept
    service-classes: rendering, capturing, audio
  Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 133.8 GiB used: 4.43 GiB (3.3%)
  SMART Message: Required tool smartctl not installed. Check --recommends
  ID-1: /dev/mmcblk0 maj-min: 179:0 model: AJTD4R size: 14.56 GiB block-size: physical: 512 B
    logical: 512 B tech: SSD fw-rev: 0x8 scheme: MBR
  ID-2: /dev/nvme0n1 maj-min: 259:0 vendor: Transcend model: TS128GMTE452T size: 119.24 GiB
    block-size: physical: 512 B logical: 512 B speed: 15.8 Gb/s lanes: 2 tech: SSD fw-rev: 52B9T7OA
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 14.31 GiB size: 14.01 GiB (97.93%) used: 4.38 GiB (31.2%) fs: ext4
    block-size: 512 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs
    uuid: eaaa4faa-eab6-400c-950f-dc96ae4e0400
  ID-2: /boot raw-size: 256 MiB size: 255 MiB (99.60%) used: 51.9 MiB (20.3%) fs: vfat
    block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: bootfs uuid: C336-AC83
  ID-3: /ssd raw-size: 119.24 GiB size: 116.81 GiB (97.96%) used: 24 KiB (0.0%) fs: ext4
    block-size: 512 B dev: /dev/nvme0n1 maj-min: 259:0 label: N/A
    uuid: 5a883d6e-ff3c-4a0e-8499-090f8157faf2
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: no
  ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap
Unmounted:
  ID-1: /dev/mmcblk0boot0 maj-min: 179:32 size: 4 MiB fs: N/A label: N/A uuid: N/A
  ID-2: /dev/mmcblk0boot1 maj-min: 179:64 size: 4 MiB fs: N/A label: N/A uuid: N/A
USB:
  Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
    lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: Microchip (formerly SMSC) Hub ports: 7 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
    lanes: 1 mode: 2.0 power: 2mA chip-ID: 0424:2517 class-ID: 0900
  Device-1: 1-1.2:3 info: Logitech M105 Optical Mouse type: mouse driver: hid-generic,usbhid
    interfaces: 1 rev: 2.0 speed: 1.5 Mb/s (183 KiB/s) lanes: 1 mode: 1.0 power: 100mA
    chip-ID: 046d:c077 class-ID: 0301
  Device-2: 1-1.4:4 info: D-WAV Scientific WS170120 type: HID driver: hid-multitouch,usbhid
    interfaces: 1 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 100mA
    chip-ID: 0eef:0005 class-ID: 0300 Device-3: 1-1.7:5 info: Logitech USB Keyboard type: keyboard,HID driver: hid-generic,usbhid
    interfaces: 2 rev: 1.1 speed: 1.5 Mb/s (183 KiB/s) lanes: 1 mode: 1.0 power: 90mA
    chip-ID: 046d:c34b class-ID: 0300
Sensors:
  Src: /sys System Temperatures: cpu: 57.9 C mobo: N/A
  Fan Speeds (rpm): N/A
Repos:
  Packages: pm: dpkg pkgs: 1441 libs: 759 tools: apt,apt-get
  Active apt repos in: /etc/apt/sources.list
    1: deb http: //raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-free rpi
  Active apt repos in: /etc/apt/sources.list.d/coral-edgetpu.list
    1: deb https: //packages.cloud.google.com/apt coral-edgetpu-stable main
  Active apt repos in: /etc/apt/sources.list.d/raspi.list
    1: deb http: //archive.raspberrypi.org/debian/ bullseye main
Processes:
  CPU top: 5 of 220
  1: cpu: 24.4% command: chromium-browser pid: 1799 mem: 166.0 MiB (9.2%)
  2: cpu: 14.0% command: chromium-browser pid: 1939 mem: 115.5 MiB (6.4%)
  3: cpu: 9.7% command: chromium-browser pid: 1849 mem: 101.3 MiB (5.6%)
  4: cpu: 6.3% command: chromium-browser pid: 2006 mem: 108.7 MiB (6.0%)
  5: cpu: 5.9% command: xorg pid: 506 mem: 60.2 MiB (3.3%)
  Memory top: 5 of 220
  1: mem: 166.0 MiB (9.2%) command: chromium-browser pid: 1799 cpu: 24.4%
  2: mem: 115.5 MiB (6.4%) command: chromium-browser pid: 1939 cpu: 14.0%
  3: mem: 108.7 MiB (6.0%) command: chromium-browser pid: 2006 cpu: 6.3%
  4: mem: 101.3 MiB (5.6%) command: chromium-browser pid: 1849 cpu: 9.7%
  5: mem: 69.9 MiB (3.8%) command: chromium-browser pid: 1854 cpu: 1.4%
Info:
  Processes: 220 Uptime: 3m Init: systemd v: 247 target: graphical (5) default: graphical
  tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release
  inxi: 3.3.30

Benchmark #73941 - Brand: Samsung eMMC (AJTD4)