Benchmark #7523 - pibenchmarks.com

Brand: SanDisk SSD Plus
SSD (2.5" SATA)
#3 / 1,700
1,829
#369 / 1,700
#356 / 989
#35 / 370
8,269
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-01-24 04:17:59
#7,523
2,254
-6,015 (-266.86%)
Anonymous
ssd

Storage Details
SanDisk SSD Plus
SSD (2.5" SATA)
240G
SSD
SanDisk
SSDPLUS240GB
2.5 inch
SATA
3.00
5,000
1d6b:0825
0x1d6b (Linux Foundation)
0x0825 (Webcam C270)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
82.7 MB/s
272.89 MB/s
210.89 MB/s
1,188 IOPS
11,403 IOPS
4,755 KB/s
45,612 KB/s
7,543 KB/s
3,566 KB/s
7,330 KB/s
4,361 KB/s

inxi Results
System: Host: raspberrypi Kernel: 4.19.75-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=75baeb59-9d92-fe42-a006-b59ccc454933 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 5 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 387.7 MiB (9.7%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 80x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.75-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: mvlan0 state: up speed: 1000 Mbps duplex: full mac: IF-ID-3: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 238.41 GiB used: 5.55 GiB (2.3%) ID-1: /dev/mmcblk0 model: SC16G size: 14.84 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: SanDisk model: SSD PLUS 240GB size: 223.57 GiB block size: physical: 512 B logical: 512 B scheme: GPT Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 223.54 GiB size: 219.03 GiB (97.98%) used: 5.50 GiB (2.5%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A uuid: 28aa8475-982b-4b66-a4dc-246f5bd2160e ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.8 MiB (20.5%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 ID-3: /media/raspberry_backup raw size: N/A size: 171.81 GiB used: 71.50 GiB (41.6%) fs: cifs remote: //192.168.X.X/raspberry_backup label: N/A uuid: N/A Unmounted: ID-1: /dev/mmcblk0p2 size: 14.58 GiB fs: ext4 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: Future Devices FT232 Serial (UART) IC type: driver: usbfs interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 0403:6001 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-2: 2-2:2 info: ASMedia type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:0825 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 4.7% command: init pid: 1 mem: 7.83 MiB (0.2%) 2: cpu: 2.4% command: pihole-ftl pid: 1781 mem: 17.3 MiB (0.4%) 3: cpu: 1.7% command: fail2ban-server started by: python3 pid: 1320 mem: 14.1 MiB (0.3%) 4: cpu: 1.6% command: tvheadend pid: 1628 mem: 13.0 MiB (0.3%) 5: cpu: 1.1% command: init pid: 699 mem: 6.54 MiB (0.1%) Memory top: 5 1: mem: 18.3 MiB (0.4%) command: apache2 pid: 1434 cpu: 0.2% 2: mem: 17.3 MiB (0.4%) command: pihole-ftl pid: 1781 cpu: 2.4% 3: mem: 16.8 MiB (0.4%) command: apache2 pid: 2336 cpu: 0.2% 4: mem: 14.1 MiB (0.3%) command: fail2ban-server started by: python3 pid: 1320 cpu: 1.7% 5: mem: 13.7 MiB (0.3%) command: unattended-upgrade-shutdown started by: python3 pid: 1401 cpu: 0.6% Info: Processes: 245 Uptime: 1m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: raspberrypi Kernel: 4.19.75-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 
           root=PARTUUID=75baeb59-9d92-fe42-a006-b59ccc454933 rootfstype=ext4 elevator=deadline 
           fsck.repair=yes rootwait 
           Console: tty 5 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 387.7 MiB (9.7%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 80x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.75-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: mvlan0 state: up speed: 1000 Mbps duplex: full mac:  
           IF-ID-3: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 238.41 GiB used: 5.55 GiB (2.3%) 
           ID-1: /dev/mmcblk0 model: SC16G size: 14.84 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: SanDisk model: SSD PLUS 240GB size: 223.57 GiB 
           block size: physical: 512 B logical: 512 B scheme: GPT 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 223.54 GiB size: 219.03 GiB (97.98%) used: 5.50 GiB (2.5%) fs: ext4 
           block size: 4096 B dev: /dev/sda1 label: N/A uuid: 28aa8475-982b-4b66-a4dc-246f5bd2160e 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.8 MiB (20.5%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 
           ID-3: /media/raspberry_backup raw size: N/A size: 171.81 GiB used: 71.50 GiB (41.6%) 
           fs: cifs remote: //192.168.X.X/raspberry_backup label: N/A uuid: N/A 
Unmounted: ID-1: /dev/mmcblk0p2 size: 14.58 GiB fs: ext4 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.3:3 info: Future Devices FT232 Serial (UART) IC type:  
           driver: usbfs interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 0403:6001 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-2: 2-2:2 info: ASMedia type: Mass Storage driver: uas interfaces: 1 rev: 3.0 
           speed: 5 Gb/s chip ID: 174c:0825 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 4.7% command: init pid: 1 mem: 7.83 MiB (0.2%) 
           2: cpu: 2.4% command: pihole-ftl pid: 1781 mem: 17.3 MiB (0.4%) 
           3: cpu: 1.7% command: fail2ban-server started by: python3 pid: 1320 
           mem: 14.1 MiB (0.3%) 
           4: cpu: 1.6% command: tvheadend pid: 1628 mem: 13.0 MiB (0.3%) 
           5: cpu: 1.1% command: init pid: 699 mem: 6.54 MiB (0.1%) 
           Memory top: 5 
           1: mem: 18.3 MiB (0.4%) command: apache2 pid: 1434 cpu: 0.2% 
           2: mem: 17.3 MiB (0.4%) command: pihole-ftl pid: 1781 cpu: 2.4% 
           3: mem: 16.8 MiB (0.4%) command: apache2 pid: 2336 cpu: 0.2% 
           4: mem: 14.1 MiB (0.3%) command: fail2ban-server started by: python3 pid: 1320 
           cpu: 1.7% 
           5: mem: 13.7 MiB (0.3%) command: unattended-upgrade-shutdown started by: python3 
           pid: 1401 cpu: 0.6% 
Info:      Processes: 245 Uptime: 1m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 
           Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

Benchmark #7523 - Brand: SanDisk SSD Plus