Benchmark #7581 - pibenchmarks.com

Brand: Undentified JMicron USB to SATA Adapter
SSD (2.5" SATA)
#12 / 1,700
931
#433 / 1,700
#417 / 989
#52 / 370
7,549
	Amazon.com AliExpress

Overview
2020-01-24 17:55:22
#7,581
8,822
+1,273 (+14.43%)
Anonymous
Kingston

Storage Details
Undentified JMicron USB to SATA Adapter
SSD (2.5" SATA)
232.9G
SSD
JMicron
JMicronTech
3.00
5,000
1d6b:0562
0x1d6b (Linux Foundation)
0x0562 (Netac Portable SSD Z6s)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
199 MB/s
285.13 MB/s
272.2 MB/s
8,793 IOPS
22,654 IOPS
35,173 KB/s
90,619 KB/s
33,700 KB/s
27,274 KB/s
29,810 KB/s
31,976 KB/s

inxi Results
System: Host: raspberrypi Kernel: 4.19.93-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=5e3da3da-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles root=/dev/sda1 rootfstype=ext4 rootwait Console: tty 2 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 583.2 MiB (14.6%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 181x76 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.93-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: eth0 state: down mac: IF-ID-3: hassio state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-4: veth0a87a5f state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: vethd35ba6b state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: vethf32b98c state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 352.14 GiB used: 16.62 GiB (4.7%) ID-1: /dev/mmcblk0 model: GD4QT size: 119.25 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: JMicron Tech model: N/A size: 232.89 GiB block size: physical: 4096 B logical: 512 B rev: 0208 scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 232.88 GiB size: 228.23 GiB (98.00%) used: 8.28 GiB (3.6%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A uuid: 9c8b5011-6855-4c4c-a1e7-665ff94704e4 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.1%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 9F2D-0578 ID-3: /var/lib/docker/overlay2/255aa9e3d5faec5f0a255484d024b9e0af99907d55bf8d77521e99777ac6364c/merged raw size: N/A size: 228.23 GiB used: 8.28 GiB (3.6%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-4: /var/lib/docker/overlay2/4852bd07c95820432fdc71f1dcc38e5be57c000b7f30df9cc919ddb8328bf57d/merged raw size: N/A size: 228.23 GiB used: 8.28 GiB (3.6%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-5: /var/lib/docker/overlay2/d59a2514a36fdb0c8ddc743babe72c02e2c5842b17842a94055094e7d381fcef/merged raw size: N/A size: 228.23 GiB used: 8.28 GiB (3.6%) fs: overlay source: ERR-102 label: N/A uuid: N/A Unmounted: ID-1: /dev/mmcblk0p2 size: 119.00 GiB fs: ext4 label: rootfs uuid: efc2ea8b-042f-47f5-953e-577d8860de55 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 1-1.3:3 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 1a40:0101 Device-1: 1-1.3.3:4 info: Sigma Designs Aeotec Z-Stick Gen5 (ZW090) - UZB type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 0658:0200 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-2: 2-2:2 info: JMicron / JMicron USA type: Mass Storage driver: uas interfaces: 1 rev: 3.2 speed: 5 Gb/s chip ID: 152d:0562 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 6.2% command: dockerd pid: 1636 mem: 88.7 MiB (2.2%) 2: cpu: 5.4% command: python3 pid: 6435 mem: 70.6 MiB (1.8%) 3: cpu: 2.4% command: htop pid: 4862 mem: 3.59 MiB (0.0%) 4: cpu: 0.6% command: [kworker/u8:4-events_unbound] pid: 5036 mem: 0.00 MiB (0.0%) 5: cpu: 0.5% command: init pid: 1 mem: 8.18 MiB (0.2%) Memory top: 5 1: mem: 88.7 MiB (2.2%) command: dockerd pid: 1636 cpu: 6.2% 2: mem: 70.6 MiB (1.8%) command: python3 pid: 6435 cpu: 5.4% 3: mem: 45.2 MiB (1.1%) command: docker pid: 5153 cpu: 0.0% 4: mem: 32.6 MiB (0.8%) command: containerd pid: 1513 cpu: 0.4% 5: mem: 31.4 MiB (0.8%) command: python3 pid: 5203 cpu: 0.3% Info: Processes: 168 Uptime: 55m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: raspberrypi Kernel: 4.19.93-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=5e3da3da-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles root=/dev/sda1 rootfstype=ext4 rootwait 
           Console: tty 2 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 583.2 MiB (14.6%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 181x76 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.93-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: eth0 state: down mac:  
           IF-ID-3: hassio state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-4: veth0a87a5f state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-5: vethd35ba6b state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-6: vethf32b98c state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-7: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 352.14 GiB used: 16.62 GiB (4.7%) 
           ID-1: /dev/mmcblk0 model: GD4QT size: 119.25 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: JMicron Tech model: N/A size: 232.89 GiB block size: 
           physical: 4096 B logical: 512 B rev: 0208 scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 232.88 GiB size: 228.23 GiB (98.00%) used: 8.28 GiB (3.6%) fs: ext4 
           block size: 4096 B dev: /dev/sda1 label: N/A uuid: 9c8b5011-6855-4c4c-a1e7-665ff94704e4 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.1%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 9F2D-0578 
           ID-3: /var/lib/docker/overlay2/255aa9e3d5faec5f0a255484d024b9e0af99907d55bf8d77521e99777ac6364c/merged raw size: N/A size: 228.23 GiB used: 8.28 GiB (3.6%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-4: /var/lib/docker/overlay2/4852bd07c95820432fdc71f1dcc38e5be57c000b7f30df9cc919ddb8328bf57d/merged raw size: N/A size: 228.23 GiB used: 8.28 GiB (3.6%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-5: /var/lib/docker/overlay2/d59a2514a36fdb0c8ddc743babe72c02e2c5842b17842a94055094e7d381fcef/merged raw size: N/A size: 228.23 GiB used: 8.28 GiB (3.6%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
Unmounted: ID-1: /dev/mmcblk0p2 size: 119.00 GiB fs: ext4 label: rootfs 
           uuid: efc2ea8b-042f-47f5-953e-577d8860de55 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 1-1.3:3 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 1a40:0101 
           Device-1: 1-1.3.3:4 info: Sigma Designs Aeotec Z-Stick Gen5 (ZW090) - UZB 
           type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s 
           chip ID: 0658:0200 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-2: 2-2:2 info: JMicron / JMicron USA type: Mass Storage driver: uas 
           interfaces: 1 rev: 3.2 speed: 5 Gb/s chip ID: 152d:0562 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 6.2% command: dockerd pid: 1636 mem: 88.7 MiB (2.2%) 
           2: cpu: 5.4% command: python3 pid: 6435 mem: 70.6 MiB (1.8%) 
           3: cpu: 2.4% command: htop pid: 4862 mem: 3.59 MiB (0.0%) 
           4: cpu: 0.6% command: [kworker/u8:4-events_unbound] pid: 5036 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.5% command: init pid: 1 mem: 8.18 MiB (0.2%) 
           Memory top: 5 
           1: mem: 88.7 MiB (2.2%) command: dockerd pid: 1636 cpu: 6.2% 
           2: mem: 70.6 MiB (1.8%) command: python3 pid: 6435 cpu: 5.4% 
           3: mem: 45.2 MiB (1.1%) command: docker pid: 5153 cpu: 0.0% 
           4: mem: 32.6 MiB (0.8%) command: containerd pid: 1513 cpu: 0.4% 
           5: mem: 31.4 MiB (0.8%) command: python3 pid: 5203 cpu: 0.3% 
Info:      Processes: 168 Uptime: 55m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

Benchmark #7581 - Brand: Undentified JMicron USB to SATA Adapter