Benchmark #7659 - pibenchmarks.com

Brand: Seagate Backup+ Ultra Touch
HDD (Portable)
#870 / 1,679
5
#957 / 1,679
#13 / 69
#0 / 24
3,956
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-01-26 21:02:05
#7,659
1,479
-2,477 (-167.48%)
Anonymous

Storage Details
Seagate Backup+ Ultra Touch
HDD (Portable)
931.3G
HDD
Seagate
BUPUltraTouch
3.20
5,000
0bc2:ac38
0x0bc2
0xac38
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
90.7 MB/s
116.87 MB/s
89.81 MB/s
310 IOPS
100 IOPS
1,241 KB/s
403 KB/s
22,098 KB/s
17,764 KB/s
250 KB/s
1,138 KB/s

inxi Results
System: Host: raspberrypi Kernel: 4.19.93-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 205.1 MiB (5.1%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 112x54 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.93-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 961.33 GiB used: 1.48 GiB (0.2%) ID-1: /dev/mmcblk0 vendor: HP model: GB1QT size: 29.81 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: Seagate model: BUP Ultra Touch size: 931.51 GiB block size: physical: 4096 B logical: 512 B rev: 1707 scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 931.26 GiB size: 916.87 GiB (98.45%) used: 1.43 GiB (0.2%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.3 MiB (21.1%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 Unmounted: ID-1: /dev/mmcblk0p2 size: 29.56 GiB fs: ext4 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 5203-DB74 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: Seagate RSS LLC type: Mass Storage driver: uas interfaces: 1 rev: 3.2 speed: 5 Gb/s chip ID: 0bc2:ac38 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 3.5% command: init pid: 1 mem: 7.95 MiB (0.2%) 2: cpu: 0.5% command: systemd-journald pid: 104 mem: 7.53 MiB (0.1%) 3: cpu: 0.5% command: systemd-udevd pid: 143 mem: 3.79 MiB (0.0%) 4: cpu: 0.3% command: dbus-daemon pid: 322 mem: 2.82 MiB (0.0%) 5: cpu: 0.2% command: [kworker/u8:0-events_unbound] pid: 7 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 7.95 MiB (0.2%) command: init pid: 1 cpu: 3.5% 2: mem: 7.53 MiB (0.1%) command: systemd-journald pid: 104 cpu: 0.5% 3: mem: 6.38 MiB (0.1%) command: systemd pid: 548 cpu: 0.1% 4: mem: 6.04 MiB (0.1%) command: sshd: pid: 542 cpu: 0.2% 5: mem: 5.45 MiB (0.1%) command: systemd-logind pid: 335 cpu: 0.2% Info: Processes: 131 Uptime: 2m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: raspberrypi Kernel: 4.19.93-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 205.1 MiB (5.1%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 112x54 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.93-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 961.33 GiB used: 1.48 GiB (0.2%) 
           ID-1: /dev/mmcblk0 vendor: HP model: GB1QT size: 29.81 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: Seagate model: BUP Ultra Touch size: 931.51 GiB 
           block size: physical: 4096 B logical: 512 B rev: 1707 scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 931.26 GiB size: 916.87 GiB (98.45%) used: 1.43 GiB (0.2%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.3 MiB (21.1%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 
Unmounted: ID-1: /dev/mmcblk0p2 size: 29.56 GiB fs: ext4 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 5203-DB74 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: Seagate RSS LLC type: Mass Storage driver: uas interfaces: 1 
           rev: 3.2 speed: 5 Gb/s chip ID: 0bc2:ac38 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 3.5% command: init pid: 1 mem: 7.95 MiB (0.2%) 
           2: cpu: 0.5% command: systemd-journald pid: 104 mem: 7.53 MiB (0.1%) 
           3: cpu: 0.5% command: systemd-udevd pid: 143 mem: 3.79 MiB (0.0%) 
           4: cpu: 0.3% command: dbus-daemon pid: 322 mem: 2.82 MiB (0.0%) 
           5: cpu: 0.2% command: [kworker/u8:0-events_unbound] pid: 7 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 7.95 MiB (0.2%) command: init pid: 1 cpu: 3.5% 
           2: mem: 7.53 MiB (0.1%) command: systemd-journald pid: 104 cpu: 0.5% 
           3: mem: 6.38 MiB (0.1%) command: systemd pid: 548 cpu: 0.1% 
           4: mem: 6.04 MiB (0.1%) command: sshd: pid: 542 cpu: 0.2% 
           5: mem: 5.45 MiB (0.1%) command: systemd-logind pid: 335 cpu: 0.2% 
Info:      Processes: 131 Uptime: 2m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 
           Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

Benchmark #7659 - Brand: Seagate Backup+ Ultra Touch