Benchmark #76732 - pibenchmarks.com

Brand: SanDisk SD Extreme A2 (SN128)
A2 C10 V30 U3
#42 / 1,539
272
#1,088 / 1,539
#97 / 369
1,346
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2023-12-30 10:10:55
#76,732
1,516
+170 (+11.21%)
Anonymous
pi-01-pve failed install with fast sd run2

Secure Digital (SD) Card Details
SanDisk SD Extreme A2 (SN128)
A2 C10 V30 U3
118.6G
SD
SanDisk
SN128
SDXC
6.00
0x03
SD
8.6
08/2022
Class 10
A2
U3
V30

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.5
Raspberry Pi 4 Model B Rev 1.5
Raspberry Pi Foundation
N/A
4
1,500
50

Operating System

Debian GNU/Linux 12 (bookworm)
aarch64

Benchmark Results
35 MB/s
40.43 MB/s
35.62 MB/s
988 IOPS
3,110 IOPS
3,952 KB/s
12,442 KB/s
11,439 KB/s
2,651 KB/s
9,213 KB/s
4,253 KB/s

inxi Results
System: Kernel: 6.1.0-16-arm64 arch: aarch64 bits: 64 compiler: gcc v: 12.2.0 clocksource: arch_sys_counter parameters: video=HDMI-A-1:1920x1080M@120,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 dma.dmachans=0x37f5 bcm2709.boardrev=0xc03115 bcm2709.serial=0x8b1bcdf bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty0 console=ttyS1,115200 root=LABEL=RASPIROOT rw fsck.repair=yes net.ifnames=0 rootwait Console: pty pts/0 Distro: Debian GNU/Linux 12 (bookworm) Machine: Type: ARM System: Raspberry Pi 4 Model B Rev 1.5 details: N/A Battery: Message: No system battery data found. Is one present? Memory: System RAM: total: 4 GiB available: 3.7 GiB used: 1.24 GiB (33.5%) RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 Topology: cpus: 1x cores: 4 smt: cache: L1: 320 KiB desc: d-4x32 KiB! i-4x48 KiB L2: 1024 KiB desc: 1x1024 KiB Speed (MHz): avg: 1400 min/max: 600/1500 scaling: driver: cpufreq-dt governor: schedutil cores: 1: 1400 2: 1400 3: 1400 4: 1400 bogomips: 432 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: gather_data_sampling status: Not affected Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: mmio_stale_data status: Not affected Type: retbleed status: Not affected Type: spec_rstack_overflow status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: 2711-v3d driver: v3d v: kernel bus-ID: N/A chip-ID: brcm:fec00000 class-ID: gpu Device-4: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: No display server data found. Headless machine? tty: 80x40 Monitor-1: HDMI-A-2 model: Gigabyte M27Q built: 2020 res: 2560x1440 dpi: 109 gamma: 1.2 chroma: red: x: 0.655 y: 0.325 green: x: 0.208 y: 0.714 blue: x: 0.145 y: 0.051 white: x: 0.314 y: 0.329 size: 596x335mm (23.46x13.19") diag: 684mm (26.9") ratio: 16:9 modes: 2560x1440, 1920x1080, 1680x1050, 1280x1024, 1440x900, 1280x720, 1024x768, 800x600, 720x480, 640x480 EDID-Warnings: 1: parse_edid: unhandled CEA mode 97 API: N/A Message: No API data available in console. Headless machine? Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi API: ALSA v: k6.1.0-16-arm64 status: kernel-api tools: N/A Network: Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: scope: global broadcast: IP v6: scope: link Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq IF-ID-1: bonding_masters state: N/A speed: N/A duplex: N/A mac: N/A IF-ID-2: wlan0 state: down mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: hardware: no software: no address: see --recommends Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial Report: This feature requires one of these tools: hciconfig/bt-adapter Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 119.08 GiB used: 4.26 GiB (3.6%) ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: SanDisk model: SN128 size: 119.08 GiB block-size: physical: 512 B logical: 512 B tech: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. Message: No optical or floppy data found. Partition: ID-1: / raw-size: 118.58 GiB size: 116.73 GiB (98.44%) used: 4.11 GiB (3.5%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: RASPIROOT uuid: 29a3769a-4944-4a04-bfc2-8865967a5d7e ID-2: /boot/firmware raw-size: 508 MiB size: 507.7 MiB (99.94%) used: 146.1 MiB (28.8%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: RASPIFIRM uuid: 67D7-2282 ID-3: /etc/pve raw-size: N/A size: 128 MiB used: 16 KiB (0.0%) fs: fuse dev: /dev/fuse label: N/A uuid: N/A Swap: Alert: No swap data was found. Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.1:3 info: Logitech Unifying Receiver type: keyboard,mouse,HID driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 98mA chip-ID: 046d:c52b class-ID: 0300 Hub-3: 2-0:1 info: super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900 Sensors: Src: /sys System Temperatures: cpu: 54.5 C mobo: N/A Fan Speeds (rpm): N/A Repos: Packages: pm: dpkg pkgs: 896 libs: 585 tools: apt,apt-get Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian bookworm main non-free-firmware non-free 2: deb http: //deb.debian.org/debian bookworm-updates main non-free-firmware non-free 3: deb http: //security.debian.org/debian-security bookworm-security main non-free-firmware non-free Active apt repos in: /etc/apt/sources.list.d/pimox.list 1: deb https: //raw.githubusercontent.com/pimox/pimox7/master/ dev/ Active apt repos in: /etc/apt/sources.list.d/pveport.list 1: deb https: //mirrors.apqa.cn/proxmox/debian/pve bookworm port Processes: CPU top: 5 of 364 1: cpu: 3.2% command: init pid: 1 mem: 12.9 MiB (0.3%) 2: cpu: 0.8% command: pve-firewall pid: 10834 mem: 96.3 MiB (2.5%) 3: cpu: 0.7% command: pvestatd pid: 12063 mem: 93.9 MiB (2.4%) 4: cpu: 0.7% command: bash pid: 20814 mem: 2.73 MiB (0.0%) 5: cpu: 0.4% command: [kworker/1:2h-kblockd] pid: 18243 mem: 0.00 MiB (0.0%) Memory top: 5 of 364 1: mem: 143.6 MiB (3.7%) command: pveproxy pid: 12042 cpu: 0.0% 2: mem: 143.6 MiB (3.7%) command: pveproxy pid: 12043 cpu: 0.0% 3: mem: 143.6 MiB (3.7%) command: pveproxy pid: 12044 cpu: 0.0% 4: mem: 139.0 MiB (3.6%) command: pvedaemon pid: 10946 cpu: 0.0% 5: mem: 139.0 MiB (3.6%) command: pvedaemon pid: 10944 cpu: 0.0% Info: Processes: 364 Uptime: 35m Init: systemd v: 252 target: graphical (5) default: graphical tool: systemctl Compilers: gcc: 12 Client: shell wrapper v: 5.2.15-release inxi: 3.3.31

inxi Results

System:
  Kernel: 6.1.0-16-arm64 arch: aarch64 bits: 64 compiler: gcc v: 12.2.0
    clocksource: arch_sys_counter
    parameters: video=HDMI-A-1:1920x1080M@120,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48
    dma.dmachans=0x37f5 bcm2709.boardrev=0xc03115 bcm2709.serial=0x8b1bcdf
    bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0
    smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000
    console=tty0 console=ttyS1,115200 root=LABEL=RASPIROOT rw fsck.repair=yes net.ifnames=0
    rootwait
  Console: pty pts/0 Distro: Debian GNU/Linux 12 (bookworm)
Machine:
  Type: ARM System: Raspberry Pi 4 Model B Rev 1.5 details: N/A Battery:
  Message: No system battery data found. Is one present?
Memory:
  System RAM: total: 4 GiB available: 3.7 GiB used: 1.24 GiB (33.5%)
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0
    stepping: 3
  Topology: cpus: 1x cores: 4 smt:  cache: L1: 320 KiB desc: d-4x32 KiB! i-4x48 KiB
    L2: 1024 KiB desc: 1x1024 KiB
  Speed (MHz): avg: 1400 min/max: 600/1500 scaling: driver: cpufreq-dt governor: schedutil cores:
    1: 1400 2: 1400 3: 1400 4: 1400 bogomips: 432
  Features: asimd cpuid crc32 evtstrm fp
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 status: Vulnerable
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700
    class-ID: hdmi
  Device-3: 2711-v3d driver: v3d v: kernel bus-ID: N/A chip-ID: brcm:fec00000 class-ID: gpu
  Device-4: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu
  Display: server: No display server data found. Headless machine? tty: 80x40
  Monitor-1: HDMI-A-2 model: Gigabyte M27Q built: 2020 res: 2560x1440 dpi: 109
    gamma: 1.2 chroma: red: x: 0.655 y: 0.325 green: x: 0.208 y: 0.714 blue: x: 0.145 y: 0.051 white:
    x: 0.314 y: 0.329 size: 596x335mm (23.46x13.19") diag: 684mm (26.9") ratio: 16:9
    modes: 2560x1440, 1920x1080, 1680x1050, 1280x1024, 1440x900, 1280x720, 1024x768, 800x600,
    720x480, 640x480
  EDID-Warnings: 1: parse_edid: unhandled CEA mode 97
  API: N/A Message: No API data available in console. Headless machine?
Audio:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi
  API: ALSA v: k6.1.0-16-arm64 status: kernel-api tools: N/A
Network:
  Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000
    class-ID: ethernet
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 
  IP v4:  scope: global broadcast: 
  IP v6:  scope: link
  Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A
    chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq
  IF-ID-1: bonding_masters state: N/A speed: N/A duplex: N/A mac: N/A
  IF-ID-2: wlan0 state: down mac: 
  WAN IP: 
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
  Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: not found rfk-block: hardware: no
    software: no address: see --recommends
  Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial
  Report: This feature requires one of these tools: hciconfig/bt-adapter
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 119.08 GiB used: 4.26 GiB (3.6%)
  ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: SanDisk model: SN128 size: 119.08 GiB block-size:
    physical: 512 B logical: 512 B tech: SSD scheme: MBR
  SMART Message: Unknown smartctl error. Unable to generate data.
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 118.58 GiB size: 116.73 GiB (98.44%) used: 4.11 GiB (3.5%) fs: ext4
    block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: RASPIROOT
    uuid: 29a3769a-4944-4a04-bfc2-8865967a5d7e
  ID-2: /boot/firmware raw-size: 508 MiB size: 507.7 MiB (99.94%) used: 146.1 MiB (28.8%)
    fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: RASPIFIRM uuid: 67D7-2282
  ID-3: /etc/pve raw-size: N/A size: 128 MiB used: 16 KiB (0.0%) fs: fuse dev: /dev/fuse
    label: N/A uuid: N/A
Swap:
  Alert: No swap data was found.
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
    lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s (57.2 MiB/s) lanes: 1
    mode: 2.0 power: 100mA chip-ID: 2109:3431 class-ID: 0900
  Device-1: 1-1.1:3 info: Logitech Unifying Receiver type: keyboard,mouse,HID
    driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1
    mode: 1.1 power: 98mA chip-ID: 046d:c52b class-ID: 0300
  Hub-3: 2-0:1 info: super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1
    mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
  Src: /sys System Temperatures: cpu: 54.5 C mobo: N/A
  Fan Speeds (rpm): N/A
Repos:
  Packages: pm: dpkg pkgs: 896 libs: 585 tools: apt,apt-get
  Active apt repos in: /etc/apt/sources.list
    1: deb http: //deb.debian.org/debian bookworm main non-free-firmware non-free
    2: deb http: //deb.debian.org/debian bookworm-updates main non-free-firmware non-free
    3: deb http: //security.debian.org/debian-security bookworm-security main non-free-firmware non-free
  Active apt repos in: /etc/apt/sources.list.d/pimox.list
    1: deb https: //raw.githubusercontent.com/pimox/pimox7/master/ dev/
  Active apt repos in: /etc/apt/sources.list.d/pveport.list
    1: deb https: //mirrors.apqa.cn/proxmox/debian/pve bookworm port
Processes:
  CPU top: 5 of 364
  1: cpu: 3.2% command: init pid: 1 mem: 12.9 MiB (0.3%)
  2: cpu: 0.8% command: pve-firewall pid: 10834 mem: 96.3 MiB (2.5%)
  3: cpu: 0.7% command: pvestatd pid: 12063 mem: 93.9 MiB (2.4%)
  4: cpu: 0.7% command: bash pid: 20814 mem: 2.73 MiB (0.0%)
  5: cpu: 0.4% command: [kworker/1:2h-kblockd] pid: 18243 mem: 0.00 MiB (0.0%)
  Memory top: 5 of 364
  1: mem: 143.6 MiB (3.7%) command: pveproxy pid: 12042 cpu: 0.0%
  2: mem: 143.6 MiB (3.7%) command: pveproxy pid: 12043 cpu: 0.0%
  3: mem: 143.6 MiB (3.7%) command: pveproxy pid: 12044 cpu: 0.0%
  4: mem: 139.0 MiB (3.6%) command: pvedaemon pid: 10946 cpu: 0.0%
  5: mem: 139.0 MiB (3.6%) command: pvedaemon pid: 10944 cpu: 0.0%
Info:
  Processes: 364 Uptime: 35m Init: systemd v: 252 target: graphical (5) default: graphical
  tool: systemctl Compilers: gcc: 12 Client: shell wrapper v: 5.2.15-release inxi: 3.3.31

Benchmark #76732 - Brand: SanDisk SD Extreme A2 (SN128)