Benchmark #7786 - pibenchmarks.com

Brand: SanDisk SSD Plus
SSD (2.5" SATA)
#3 / 1,700
1,829
#368 / 1,700
#355 / 989
#34 / 370
8,269
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-01-29 08:41:40
#7,786
3,337
-4,932 (-147.80%)
Anonymous
SanDisk SSD PLUS 120GB using UGREEN SATA to USB 3.0 case on RPi 4 (4GB)

Storage Details
SanDisk SSD Plus
SSD (2.5" SATA)
120G
SSD
SanDisk
SSDPLUS120GB
2.5 inch
SATA
174c:55aa
0x174c (ASMedia Technology Inc.)
0x55aa (ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
182 MB/s
267.83 MB/s
243.33 MB/s
1,427 IOPS
11,333 IOPS
5,708 KB/s
45,334 KB/s
8,847 KB/s
4,121 KB/s
8,729 KB/s
3,994 KB/s

inxi Results
System: Host: raspberrypi Kernel: 4.19.66-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=tty1 root=PARTUUID=44cfefdd-01 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 574.7 MiB (14.4%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 231x53 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.66-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: br-e1fb62e66d79 state: down mac: IP v4: scope: global broadcast: IF-ID-2: br0 state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: type: dynamic mngtmpaddr scope: global IP v6: scope: link IF-ID-3: docker0 state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-4: eth0 state: up speed: 1000 Mbps duplex: full mac: IF-ID-5: hassio state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-6: veth2a562da state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: veth9bea78d state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: vethad53755 state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: vethaea97fa state: up speed: 10000 Mbps duplex: full mac: IF-ID-10: vethpivccu state: up speed: 10000 Mbps duplex: full mac: IF-ID-11: wlan0 state: down mac: WAN IP: No WAN IP data found. Connected to the web? SSL issues? Drives: Local Storage: total: 141.51 GiB used: 20.87 GiB (14.8%) ID-1: /dev/mmcblk0 model: SS32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: SanDisk model: SSD PLUS 120GB size: 111.79 GiB block size: physical: 512 B logical: 512 B scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 111.76 GiB size: 109.50 GiB (97.98%) used: 10.42 GiB (9.5%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A uuid: ae84652c-c9d2-403d-9fe7-ab41e3dab50b ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 39.1 MiB (15.5%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 3FFE-CDCA ID-3: /var/lib/docker/overlay2/04d2be7c2cb6c643cf7ec6031a63fdbaae2f7b86e029476230fd2ec4bca3ef95/merged raw size: N/A size: 109.50 GiB used: 10.42 GiB (9.5%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-4: /var/lib/docker/overlay2/210928dc96669f5750b237ef1fc160e6c9a4d1f7c3b46b3cb00e724f6053bdc9/merged raw size: N/A size: 109.50 GiB used: 10.42 GiB (9.5%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-5: /var/lib/docker/overlay2/6a8b5149c1599d6f89db826d6fe9b0d1ade0861afffa6719c09c55ea422ab3f0/merged raw size: N/A size: 109.50 GiB used: 10.42 GiB (9.5%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-6: /var/lib/docker/overlay2/aaa777f6b74037a4d1ff3536791417e09820cbdfb17203a6e5bc99c79e1e558c/merged raw size: N/A size: 109.50 GiB used: 10.42 GiB (9.5%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-7: /var/lib/docker/overlay2/d54c4299087011db50d698c1e74b4fdc726c24a468c694dc6c3ceecb6835779c/merged raw size: N/A size: 109.50 GiB used: 10.42 GiB (9.5%) fs: overlay source: ERR-102 label: N/A uuid: N/A Unmounted: ID-1: /dev/mmcblk0p2 size: 29.47 GiB fs: ext4 label: rootfs uuid: 3122c401-b3c6-4d27-8e0d-6708a7613aed USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/pivccu.list 1: deb https: //www.pivccu.de/piVCCU stable main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 19.3% command: python3 pid: 1963 mem: 87.5 MiB (2.2%) 2: cpu: 14.8% command: java pid: 2099 mem: 87.9 MiB (2.2%) 3: cpu: 4.6% command: init pid: 1 mem: 8.01 MiB (0.2%) 4: cpu: 2.2% command: python3 pid: 1024 mem: 30.9 MiB (0.7%) 5: cpu: 2.1% command: regahss.community pid: 2295 mem: 14.4 MiB (0.3%) Memory top: 5 1: mem: 87.9 MiB (2.2%) command: java pid: 2099 cpu: 14.8% 2: mem: 87.5 MiB (2.2%) command: python3 pid: 1963 cpu: 19.3% 3: mem: 65.5 MiB (1.6%) command: dockerd pid: 508 cpu: 1.6% 4: mem: 43.8 MiB (1.1%) command: docker pid: 962 cpu: 0.1% 5: mem: 30.9 MiB (0.7%) command: python3 pid: 1024 cpu: 2.2% Info: Processes: 175 Uptime: 2m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: raspberrypi Kernel: 4.19.66-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=tty1 root=PARTUUID=44cfefdd-01 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Console: tty 0 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 574.7 MiB (14.4%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 231x53 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.66-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: br-e1fb62e66d79 state: down mac:  
           IP v4:  scope: global broadcast:  
           IF-ID-2: br0 state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr scope: global 
           IP v6:  scope: link 
           IF-ID-3: docker0 state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-4: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IF-ID-5: hassio state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-6: veth2a562da state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-7: veth9bea78d state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-8: vethad53755 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-9: vethaea97fa state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-10: vethpivccu state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-11: wlan0 state: down mac:  
           WAN IP: No WAN IP data found. Connected to the web? SSL issues? 
Drives:    Local Storage: total: 141.51 GiB used: 20.87 GiB (14.8%) 
           ID-1: /dev/mmcblk0 model: SS32G size: 29.72 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: SanDisk model: SSD PLUS 120GB size: 111.79 GiB 
           block size: physical: 512 B logical: 512 B scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 111.76 GiB size: 109.50 GiB (97.98%) used: 10.42 GiB (9.5%) fs: ext4 
           block size: 4096 B dev: /dev/sda1 label: N/A uuid: ae84652c-c9d2-403d-9fe7-ab41e3dab50b 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 39.1 MiB (15.5%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 3FFE-CDCA 
           ID-3: /var/lib/docker/overlay2/04d2be7c2cb6c643cf7ec6031a63fdbaae2f7b86e029476230fd2ec4bca3ef95/merged raw size: N/A size: 109.50 GiB used: 10.42 GiB (9.5%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-4: /var/lib/docker/overlay2/210928dc96669f5750b237ef1fc160e6c9a4d1f7c3b46b3cb00e724f6053bdc9/merged raw size: N/A size: 109.50 GiB used: 10.42 GiB (9.5%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-5: /var/lib/docker/overlay2/6a8b5149c1599d6f89db826d6fe9b0d1ade0861afffa6719c09c55ea422ab3f0/merged raw size: N/A size: 109.50 GiB used: 10.42 GiB (9.5%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-6: /var/lib/docker/overlay2/aaa777f6b74037a4d1ff3536791417e09820cbdfb17203a6e5bc99c79e1e558c/merged raw size: N/A size: 109.50 GiB used: 10.42 GiB (9.5%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-7: /var/lib/docker/overlay2/d54c4299087011db50d698c1e74b4fdc726c24a468c694dc6c3ceecb6835779c/merged raw size: N/A size: 109.50 GiB used: 10.42 GiB (9.5%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
Unmounted: ID-1: /dev/mmcblk0p2 size: 29.47 GiB fs: ext4 label: rootfs 
           uuid: 3122c401-b3c6-4d27-8e0d-6708a7613aed 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 174c:55aa 
           Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/pivccu.list 
           1: deb https: //www.pivccu.de/piVCCU stable main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 19.3% command: python3 pid: 1963 mem: 87.5 MiB (2.2%) 
           2: cpu: 14.8% command: java pid: 2099 mem: 87.9 MiB (2.2%) 
           3: cpu: 4.6% command: init pid: 1 mem: 8.01 MiB (0.2%) 
           4: cpu: 2.2% command: python3 pid: 1024 mem: 30.9 MiB (0.7%) 
           5: cpu: 2.1% command: regahss.community pid: 2295 mem: 14.4 MiB (0.3%) 
           Memory top: 5 
           1: mem: 87.9 MiB (2.2%) command: java pid: 2099 cpu: 14.8% 
           2: mem: 87.5 MiB (2.2%) command: python3 pid: 1963 cpu: 19.3% 
           3: mem: 65.5 MiB (1.6%) command: dockerd pid: 508 cpu: 1.6% 
           4: mem: 43.8 MiB (1.1%) command: docker pid: 962 cpu: 0.1% 
           5: mem: 30.9 MiB (0.7%) command: python3 pid: 1024 cpu: 2.2% 
Info:      Processes: 175 Uptime: 2m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

Benchmark #7786 - Brand: SanDisk SSD Plus