Benchmark #78023 - pibenchmarks.com

Brand: Transcend SSD200 Series
SSD (2.5" SATA)
#206 / 1,539
49
#616 / 1,539
#593 / 875
#197 / 363
5,678
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2024-01-22 12:48:10
#78,023
9,780
+4,102 (+41.94%)
40mm noctura, butchered Pi4 case
Transcend SSD230S on unknown USB3 connector, Pi5 8GB

Storage Details
Transcend SSD200 Series
SSD (2.5" SATA)
128G
SSD
Transcend
TS128GSSD230S
2.5 inch
SATA
3.00
5,000
0080:a001
0x0080 (Unknown)
0xa001 (JMS578 based SATA bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 5B 1.0
Raspberry Pi 5 Model B Rev 1.0
Raspberry Pi Foundation
N/A
4
2,400
910 (+10)
2,133

Operating System

Debian GNU/Linux 12 (bookworm)
aarch64

Benchmark Results
259 MB/s
262.19 MB/s
174.9 MB/s
31,604 IOPS
33,573 IOPS
126,419 KB/s
134,295 KB/s
43,335 KB/s
23,583 KB/s
18,699 KB/s
12,081 KB/s

inxi Results
System: Kernel: 6.1.0-rpi7-rpi-2712 arch: aarch64 bits: 64 compiler: gcc v: 12.2.0 clocksource: arch_sys_counter parameters: coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=541d8fa8-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles cfg80211.ieee80211_regdom=US Desktop: wayfire v: 0.7.5 dm: LightDM v: 1.26.0 Distro: Debian GNU/Linux 12 (bookworm) Machine: Type: ARM System: Raspberry Pi 5 Model B Rev 1.0 details: N/A rev: d04170 Battery: Message: No system battery data found. Is one present? Memory: System RAM: total: 8 GiB available: 7.86 GiB used: 729.1 MiB (9.1%) igpu: 8 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a76 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 4 stepping: 1 Topology: cpus: 1x cores: 4 smt: N/A cache: N/A Speed (MHz): avg: 2400 min/max: 1500/2400 scaling: driver: cpufreq-dt governor: ondemand cores: 1: 2400 2: 2400 3: 2400 4: 2400 bogomips: 432 Features: aes asimd asimddp asimdhp asimdrdm atomics cpuid crc32 dcpop evtstrm fp fphp lrcpc pmull sha1 sha2 Vulnerabilities: Type: gather_data_sampling status: Not affected Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: mmio_stale_data status: Not affected Type: retbleed status: Not affected Type: spec_rstack_overflow status: Not affected Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 mitigation: CSV2, BHB Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2712-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:107c701400 class-ID: hdmi Device-2: bcm2712-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:107c706400 class-ID: hdmi Display: wayland server: X.org v: 1.21.X.X with: Xwayland v: 22.1.9 compositor: wayfire v: 0.7.5 driver: gpu: vc4-drm,vc4_crtc,vc4_dpi,vc4_dsi,vc4_firmware_kms,vc4_hdmi,vc4_hvs,vc4_txp,vc4_v3d,vc4_vec display-ID: :1 Monitor-1: HDMI-A-1 model: Dell SE2719H built: 2019 res: 1920x1080 dpi: 82 gamma: 1.2 chroma: red: x: 0.655 y: 0.337 green: x: 0.322 y: 0.612 blue: x: 0.153 y: 0.059 white: x: 0.314 y: 0.329 size: 598x336mm (23.54x13.23") diag: 686mm (27") ratio: 16:9 modes: 1920x1080, 1920x1080i, 1600x900, 1280x1024, 1152x864, 1280x720, 1024x768, 800x600, 720x576, 720x576i, 720x480, 720x480i, 640x480, 720x400 API: EGL v: 1.5 hw: drv: broadcom v3d drv: broadcom vc4 platforms: device: 0 egl: 1.4 drv: v3d device: 1 drv: swrast gbm: egl: 1.4 drv: v3d surfaceless: egl: 1.4 drv: v3d x11: egl: 1.4 drv: vc4 inactive: wayland API: OpenGL v: 3.1 vendor: broadcom mesa v: 23.2.1-1~bpo12+rpt2 glx-v: 1.4 es-v: 3.1 direct-render: yes renderer: V3D 7.1 device-ID: 14e4:ffffffff memory: 7.68 GiB unified: yes Audio: Device-1: bcm2712-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:107c701400 class-ID: hdmi Device-2: bcm2712-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:107c706400 class-ID: hdmi API: ALSA v: k6.1.0-rpi7-rpi-2712 status: kernel-api tools: alsactl,alsamixer,amixer Server-1: PipeWire v: 0.3.65 status: n/a (root, process) with: 1: pipewire-pulse status: active 2: wireplumber status: active tools: pw-cat,pw-cli,wpctl Server-2: PulseAudio v: 16.1 status: off (using pipewire-pulse) tools: pacat,pactl Network: Device-1: driver: rp1 v: N/A pcie: gen: 2 speed: 5 GT/s lanes: 4 port: N/A bus-ID: 01:00.0 chip-ID: 1de4:0001 class-ID: 0200 IF: wlan0 state: down mac: IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: type: noprefixroute scope: link WAN IP: Bluetooth: Device-1: bcm7271-uart driver: bcm7271_uart bus-ID: N/A chip-ID: brcm:107d50c000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: bt-v: 5.0 lmp-v: 9 sub-v: 6119 hci-v: 9 rev: 17e class-ID: 6c0000 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: peripheral accept service-classes: rendering, capturing, audio, telephony Device-2: bcm7271-uart driver: N/A bus-ID: N/A chip-ID: brcm:serial0 class-ID: serial Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 119.24 GiB used: 19.73 GiB (16.5%) ID-1: /dev/sda maj-min: 8:0 model: TO Exter nal USB 3.0 drive model: TS128GSSD230S family: based SSDs size: 119.24 GiB block-size: physical: 512 B logical: 512 B type: USB rev: 3.0 spd: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1 sata: 3.1 speed: 6.0 Gb/s tech: SSD fw-rev: 0204 drive-rev: Q0922GS temp: 50 C scheme: MBR SMART: yes state: enabled health: PASSED on: 58d 20h cycles: 2167 read: 10.15 TiB written: 10.17 TiB Message: No optical or floppy data found. Partition: ID-1: / raw-size: 118.74 GiB size: 116.32 GiB (97.96%) used: 19.66 GiB (16.9%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: 4aa56689-dcb4-4759-90e6-179beae559ac ID-2: /boot/firmware raw-size: 512 MiB size: 511 MiB (99.80%) used: 73.8 MiB (14.4%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: bootfs uuid: EF6E-C078 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: no ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-2:2 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA chip-ID: 05e3:0610 class-ID: 0900 Device-1: 1-2.1:3 info: Holtek Wired Keyboard (78/79 key) [RPI 5] type: keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s (183 KiB/s) lanes: 1 mode: 1.0 power: 100mA chip-ID: 04d9:0006 class-ID: 0300 Device-2: 1-2.2:4 info: Pixart Imaging Optical Mouse type: mouse driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s (183 KiB/s) lanes: 1 mode: 1.0 power: 100mA chip-ID: 093a:2510 class-ID: 0301 Hub-3: 2-0:1 info: super-speed hub ports: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-1:2 info: JMS578 based SATA bridge type: mass storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 power: 896mA chip-ID: 0080:a001 class-ID: 0806 Hub-4: 3-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Hub-5: 4-0:1 info: super-speed hub ports: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900 Sensors: Src: /sys System Temperatures: cpu: 46.9 C mobo: N/A Fan Speeds (rpm): N/A Repos: Packages: pm: dpkg pkgs: 1844 libs: 998 tools: apt,apt-get Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian bookworm main contrib non-free non-free-firmware 2: deb http: //deb.debian.org/debian-security/ bookworm-security main contrib non-free non-free-firmware 3: deb http: //deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware Active apt repos in: /etc/apt/sources.list.d/brave-browser-release.list 1: deb [arch=arm64 signed-by=/usr/share/keyrings/brave-browser-archive-keyring.gpg] https: //brave-browser-apt-release.s3.brave.com/ stable main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.com/debian/ bookworm main Active apt repos in: /etc/apt/sources.list.d/teamviewer.list 1: deb [signed-by=/usr/share/keyrings/teamviewer-keyring.gpg] https: //linux.teamviewer.com/deb stable main Processes: CPU top: 5 of 191 1: cpu: 3.0% command: wayfire pid: 1740 mem: 123.4 MiB (1.5%) 2: cpu: 1.6% command: xwayland pid: 2388 mem: 90.5 MiB (1.1%) 3: cpu: 1.4% command: lxterminal pid: 29202 mem: 40.4 MiB (0.5%) 4: cpu: 0.7% command: wireplumber pid: 2228 mem: 42.2 MiB (0.5%) 5: cpu: 0.5% command: pipewire-pulse pid: 1739 mem: 12.5 MiB (0.1%) Memory top: 5 of 191 1: mem: 123.4 MiB (1.5%) command: wayfire pid: 1740 cpu: 3.0% 2: mem: 90.5 MiB (1.1%) command: xwayland pid: 2388 cpu: 1.6% 3: mem: 68.7 MiB (0.8%) command: wf-panel-pi pid: 1929 cpu: 0.1% 4: mem: 65.0 MiB (0.8%) command: pcmanfm pid: 1942 cpu: 0.0% 5: mem: 55.5 MiB (0.6%) command: xdg-desktop-portal-wlr pid: 2251 cpu: 0.0% Info: Processes: 191 Uptime: 4h 57m Init: systemd v: 252 target: graphical (5) default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12 Client: shell wrapper v: 5.2.15-release inxi: 3.3.31

inxi Results

System:
  Kernel: 6.1.0-rpi7-rpi-2712 arch: aarch64 bits: 64 compiler: gcc v: 12.2.0
    clocksource: arch_sys_counter parameters: coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe
    snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX
    vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1
    root=PARTUUID=541d8fa8-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash
    plymouth.ignore-serial-consoles cfg80211.ieee80211_regdom=US
  Desktop: wayfire v: 0.7.5 dm: LightDM v: 1.26.0 Distro: Debian GNU/Linux 12 (bookworm)
Machine:
  Type: ARM System: Raspberry Pi 5 Model B Rev 1.0 details: N/A rev: d04170 Battery:
  Message: No system battery data found. Is one present?
Memory:
  System RAM: total: 8 GiB available: 7.86 GiB used: 729.1 MiB (9.1%) igpu: 8 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a76 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 4
    stepping: 1
  Topology: cpus: 1x cores: 4 smt: N/A cache: N/A
  Speed (MHz): avg: 2400 min/max: 1500/2400 scaling: driver: cpufreq-dt governor: ondemand cores:
    1: 2400 2: 2400 3: 2400 4: 2400 bogomips: 432
  Features: aes asimd asimddp asimdhp asimdrdm atomics cpuid crc32 dcpop evtstrm fp fphp lrcpc
    pmull sha1 sha2
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 mitigation: CSV2, BHB
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2712-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:107c701400
    class-ID: hdmi
  Device-2: bcm2712-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:107c706400
    class-ID: hdmi
  Display: wayland server: X.org v: 1.21.X.X with: Xwayland v: 22.1.9 compositor: wayfire
    v: 0.7.5 driver:
    gpu: vc4-drm,vc4_crtc,vc4_dpi,vc4_dsi,vc4_firmware_kms,vc4_hdmi,vc4_hvs,vc4_txp,vc4_v3d,vc4_vec
    display-ID: :1
  Monitor-1: HDMI-A-1 model: Dell SE2719H built: 2019 res: 1920x1080 dpi: 82
    gamma: 1.2 chroma: red: x: 0.655 y: 0.337 green: x: 0.322 y: 0.612 blue: x: 0.153 y: 0.059 white:
    x: 0.314 y: 0.329 size: 598x336mm (23.54x13.23") diag: 686mm (27") ratio: 16:9 modes: 1920x1080,
    1920x1080i, 1600x900, 1280x1024, 1152x864, 1280x720, 1024x768, 800x600, 720x576, 720x576i,
    720x480, 720x480i, 640x480, 720x400
  API: EGL v: 1.5 hw: drv: broadcom v3d drv: broadcom vc4 platforms: device: 0 egl: 1.4 drv: v3d
    device: 1 drv: swrast gbm: egl: 1.4 drv: v3d surfaceless: egl: 1.4 drv: v3d x11: egl: 1.4
    drv: vc4 inactive: wayland
  API: OpenGL v: 3.1 vendor: broadcom mesa v: 23.2.1-1~bpo12+rpt2 glx-v: 1.4 es-v: 3.1
    direct-render: yes renderer: V3D 7.1 device-ID: 14e4:ffffffff memory: 7.68 GiB unified: yes
Audio:
  Device-1: bcm2712-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:107c701400 class-ID: hdmi
  Device-2: bcm2712-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:107c706400 class-ID: hdmi
  API: ALSA v: k6.1.0-rpi7-rpi-2712 status: kernel-api tools: alsactl,alsamixer,amixer
  Server-1: PipeWire v: 0.3.65 status: n/a (root, process) with: 1: pipewire-pulse status: active
    2: wireplumber status: active tools: pw-cat,pw-cli,wpctl
  Server-2: PulseAudio v: 16.1 status: off (using pipewire-pulse) tools: pacat,pactl
Network:
  Device-1: driver: rp1 v: N/A pcie: gen: 2 speed: 5 GT/s lanes: 4 port: N/A bus-ID: 01:00.0
    chip-ID: 1de4:0001 class-ID: 0200
  IF: wlan0 state: down mac: 
  IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: 
  IP v4:  type: noprefixroute scope: global broadcast: 
  IP v6:  type: noprefixroute scope: link
  WAN IP: 
Bluetooth:
  Device-1: bcm7271-uart driver: bcm7271_uart bus-ID: N/A chip-ID: brcm:107d50c000 class-ID: serial
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address:  bt-v: 5.0 lmp-v: 9 sub-v: 6119
    hci-v: 9 rev: 17e class-ID: 6c0000
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: peripheral accept
    service-classes: rendering, capturing, audio, telephony
  Device-2: bcm7271-uart driver: N/A bus-ID: N/A chip-ID: brcm:serial0 class-ID: serial
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 119.24 GiB used: 19.73 GiB (16.5%)
  ID-1: /dev/sda maj-min: 8:0 model: TO Exter nal USB 3.0 drive model: TS128GSSD230S
    family: based SSDs size: 119.24 GiB block-size: physical: 512 B logical: 512 B type: USB rev: 3.0
    spd: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1 sata: 3.1 speed: 6.0 Gb/s tech: SSD fw-rev: 0204 drive-rev: Q0922GS temp: 50 C scheme: MBR
  SMART: yes state: enabled health: PASSED on: 58d 20h cycles: 2167 read: 10.15 TiB
    written: 10.17 TiB
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 118.74 GiB size: 116.32 GiB (97.96%) used: 19.66 GiB (16.9%) fs: ext4
    block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs
    uuid: 4aa56689-dcb4-4759-90e6-179beae559ac
  ID-2: /boot/firmware raw-size: 512 MiB size: 511 MiB (99.80%) used: 73.8 MiB (14.4%) fs: vfat
    block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: bootfs uuid: EF6E-C078
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: no
  ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
    lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-2:2 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1
    mode: 2.0 power: 100mA chip-ID: 05e3:0610 class-ID: 0900
  Device-1: 1-2.1:3 info: Holtek Wired Keyboard (78/79 key) [RPI 5] type: keyboard,HID
    driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s (183 KiB/s) lanes: 1 mode: 1.0
    power: 100mA chip-ID: 04d9:0006 class-ID: 0300
  Device-2: 1-2.2:4 info: Pixart Imaging Optical Mouse type: mouse driver: hid-generic,usbhid
    interfaces: 1 rev: 1.1 speed: 1.5 Mb/s (183 KiB/s) lanes: 1 mode: 1.0 power: 100mA
    chip-ID: 093a:2510 class-ID: 0301
  Hub-3: 2-0:1 info: super-speed hub ports: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1
    mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900
  Device-1: 2-1:2 info: JMS578 based SATA bridge type: mass storage driver: uas interfaces: 1
    rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 power: 896mA chip-ID: 0080:a001
    class-ID: 0806 Hub-4: 3-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
    lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900
  Hub-5: 4-0:1 info: super-speed hub ports: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1
    mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
  Src: /sys System Temperatures: cpu: 46.9 C mobo: N/A
  Fan Speeds (rpm): N/A
Repos:
  Packages: pm: dpkg pkgs: 1844 libs: 998 tools: apt,apt-get
  Active apt repos in: /etc/apt/sources.list
    1: deb http: //deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http: //deb.debian.org/debian-security/ bookworm-security main contrib non-free non-free-firmware
    3: deb http: //deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/brave-browser-release.list
    1: deb [arch=arm64 signed-by=/usr/share/keyrings/brave-browser-archive-keyring.gpg] https: //brave-browser-apt-release.s3.brave.com/ stable main
  Active apt repos in: /etc/apt/sources.list.d/raspi.list
    1: deb http: //archive.raspberrypi.com/debian/ bookworm main
  Active apt repos in: /etc/apt/sources.list.d/teamviewer.list
    1: deb [signed-by=/usr/share/keyrings/teamviewer-keyring.gpg] https: //linux.teamviewer.com/deb stable main
Processes:
  CPU top: 5 of 191
  1: cpu: 3.0% command: wayfire pid: 1740 mem: 123.4 MiB (1.5%)
  2: cpu: 1.6% command: xwayland pid: 2388 mem: 90.5 MiB (1.1%)
  3: cpu: 1.4% command: lxterminal pid: 29202 mem: 40.4 MiB (0.5%)
  4: cpu: 0.7% command: wireplumber pid: 2228 mem: 42.2 MiB (0.5%)
  5: cpu: 0.5% command: pipewire-pulse pid: 1739 mem: 12.5 MiB (0.1%)
  Memory top: 5 of 191
  1: mem: 123.4 MiB (1.5%) command: wayfire pid: 1740 cpu: 3.0%
  2: mem: 90.5 MiB (1.1%) command: xwayland pid: 2388 cpu: 1.6%
  3: mem: 68.7 MiB (0.8%) command: wf-panel-pi pid: 1929 cpu: 0.1%
  4: mem: 65.0 MiB (0.8%) command: pcmanfm pid: 1942 cpu: 0.0%
  5: mem: 55.5 MiB (0.6%) command: xdg-desktop-portal-wlr pid: 2251 cpu: 0.0%
Info:
  Processes: 191 Uptime: 4h 57m Init: systemd v: 252 target: graphical (5) default: graphical
  tool: systemctl Compilers: gcc: 12.2.0 alt: 12 Client: shell wrapper v: 5.2.15-release
  inxi: 3.3.31

Benchmark #78023 - Brand: Transcend SSD200 Series