Benchmark #7870 - pibenchmarks.com

Brand: Samsung PM871 Series
SSD (2.5" SATA)
#226 / 1,700
73
#642 / 1,700
#617 / 989
#155 / 370
6,318
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl

Overview
2020-01-31 04:32:38
#7,870
4,916
-1,402 (-28.52%)
Anonymous

Storage Details
Samsung PM871 Series
SSD (2.5" SATA)
238.2G
SSD
Samsung
MZ7LN256HAJQ-000
3.00
5,000
1d6b:0731
0x1d6b (Linux Foundation)
0x0731 (GL3310 SATA 3Gb/s Bridge Controller)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
167 MB/s
131.33 MB/s
109.14 MB/s
5,178 IOPS
4,155 IOPS
20,713 KB/s
16,623 KB/s
18,152 KB/s
12,113 KB/s
13,776 KB/s
16,686 KB/s

inxi Results
System: Host: raspberrypi4 Kernel: 4.19.79-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=5cca732d-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 439.0 MiB (11.0%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 102x42 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.79-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 297.95 GiB used: 9.93 GiB (3.3%) ID-1: /dev/mmcblk0 model: SC64G size: 59.48 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: Samsung model: MZ7LN256HAJQ-000 size: 238.47 GiB block size: physical: 512 B logical: 512 B rev: 0004 scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 238.22 GiB size: 233.48 GiB (98.01%) used: 9.88 GiB (4.2%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: N/A uuid: 99d72e2c-2256-4980-85bd-13b1307b59be ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.5 MiB (20.4%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 Unmounted: ID-1: /dev/mmcblk0p2 size: 59.22 GiB fs: ext4 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: N/A uuid: CA6E-ED9D USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 1-1.3:3 info: Hitachi ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 045b:0209 Hub: 1-1.3.1:5 info: Hitachi ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 045b:0209 Device-1: 1-1.3.X.X:10 info: Future Devices FT232 Serial (UART) IC type: driver: ftdi_sio interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 0403:6001 Device-2: 1-1.3.X.X:9 info: QinHeng HL-340 USB-Serial adapter type: driver: ch341,ch341-uart interfaces: 1 rev: 1.1 speed: 12 Mb/s chip ID: 1a86:7523 Device-3: 1-1.3.X.X:8 info: Future Devices FT232 Serial (UART) IC type: driver: ftdi_sio interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 0403:6001 Device-4: 1-1.3.2:7 info: Future Devices FT232 Serial (UART) IC type: driver: ftdi_sio interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 0403:6001 Device-5: 1-1.3.3:6 info: Future Devices FT232 Serial (UART) IC type: driver: ftdi_sio interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 0403:6001 Device-6: 1-1.4:4 info: Atmel type: HID driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 03eb:2013 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-7: 2-1:2 info: Genesys Logic GL3310 SATA 3Gb/s Bridge Controller type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 05e3:0731 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 10.3% command: perl pid: 31860 mem: 101.4 MiB (2.5%) 2: cpu: 0.2% command: java pid: 553 mem: 112.8 MiB (2.8%) 3: cpu: 0.1% command: [rcu_sched] pid: 10 mem: 0.00 MiB (0.0%) 4: cpu: 0.1% command: bash pid: 10157 mem: 2.81 MiB (0.0%) 5: cpu: 0.0% command: init pid: 1 mem: 7.95 MiB (0.2%) Memory top: 5 1: mem: 112.8 MiB (2.8%) command: java pid: 553 cpu: 0.2% 2: mem: 101.4 MiB (2.5%) command: perl pid: 31860 cpu: 10.3% 3: mem: 18.9 MiB (0.4%) command: systemd-journald pid: 121 cpu: 0.0% 4: mem: 7.95 MiB (0.2%) command: init pid: 1 cpu: 0.0% 5: mem: 7.21 MiB (0.1%) command: systemd pid: 5514 cpu: 0.0% Info: Processes: 124 Uptime: 15d 20h 09m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: raspberrypi4 Kernel: 4.19.79-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=5cca732d-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 439.0 MiB (11.0%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 102x42 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.79-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 297.95 GiB used: 9.93 GiB (3.3%) 
           ID-1: /dev/mmcblk0 model: SC64G size: 59.48 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: Samsung model: MZ7LN256HAJQ-000 size: 238.47 GiB 
           block size: physical: 512 B logical: 512 B rev: 0004 scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 238.22 GiB size: 233.48 GiB (98.01%) used: 9.88 GiB (4.2%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: N/A uuid: 99d72e2c-2256-4980-85bd-13b1307b59be 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.5 MiB (20.4%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 
Unmounted: ID-1: /dev/mmcblk0p2 size: 59.22 GiB fs: ext4 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: N/A uuid: CA6E-ED9D 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 1-1.3:3 info: Hitachi ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 045b:0209 
           Hub: 1-1.3.1:5 info: Hitachi ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 045b:0209 
           Device-1: 1-1.3.X.X:10 info: Future Devices FT232 Serial (UART) IC 
           type:  driver: ftdi_sio interfaces: 1 rev: 2.0 speed: 12 Mb/s 
           chip ID: 0403:6001 Device-2: 1-1.3.X.X:9 info: QinHeng HL-340 USB-Serial adapter type:  
           driver: ch341,ch341-uart interfaces: 1 rev: 1.1 speed: 12 Mb/s chip ID: 1a86:7523 
           Device-3: 1-1.3.X.X:8 info: Future Devices FT232 Serial (UART) IC 
           type:  driver: ftdi_sio interfaces: 1 rev: 2.0 speed: 12 Mb/s 
           chip ID: 0403:6001 Device-4: 1-1.3.2:7 info: Future Devices FT232 Serial (UART) IC type:  
           driver: ftdi_sio interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 0403:6001 
           Device-5: 1-1.3.3:6 info: Future Devices FT232 Serial (UART) IC type:  
           driver: ftdi_sio interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 0403:6001 
           Device-6: 1-1.4:4 info: Atmel type: HID driver: hid-generic,usbhid interfaces: 1 
           rev: 2.0 speed: 12 Mb/s chip ID: 03eb:2013 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-7: 2-1:2 info: Genesys Logic GL3310 SATA 3Gb/s Bridge Controller 
           type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s 
           chip ID: 05e3:0731 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 10.3% command: perl pid: 31860 mem: 101.4 MiB (2.5%) 
           2: cpu: 0.2% command: java pid: 553 mem: 112.8 MiB (2.8%) 
           3: cpu: 0.1% command: [rcu_sched] pid: 10 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.1% command: bash pid: 10157 mem: 2.81 MiB (0.0%) 
           5: cpu: 0.0% command: init pid: 1 mem: 7.95 MiB (0.2%) 
           Memory top: 5 
           1: mem: 112.8 MiB (2.8%) command: java pid: 553 cpu: 0.2% 
           2: mem: 101.4 MiB (2.5%) command: perl pid: 31860 cpu: 10.3% 
           3: mem: 18.9 MiB (0.4%) command: systemd-journald pid: 121 cpu: 0.0% 
           4: mem: 7.95 MiB (0.2%) command: init pid: 1 cpu: 0.0% 
           5: mem: 7.21 MiB (0.1%) command: systemd pid: 5514 cpu: 0.0% 
Info:      Processes: 124 Uptime: 15d 20h 09m Init: systemd v: 241 runlevel: 3 
           target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper 
           v: 5.0.3-release inxi: 3.0.37

Benchmark #7870 - Brand: Samsung PM871 Series