Benchmark #79160 - pibenchmarks.com

Brand: Toshiba Canvio 2.5" MQ Series
HDD (2.5" SATA)
#133 / 1,672
115
#1,082 / 1,672
#23 / 68
#2 / 20
2,052
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2024-02-08 03:29:57
#79,160
1,618
-434 (-26.82%)
RPi5KDE-AJ-Mechanical
RPi5KDE-AJ-Mechanic

Storage Details
Toshiba Canvio 2.5" MQ Series
HDD (2.5" SATA)
500G
HDD
Toshiba
MQ01ACF050
2.5 inch
SATA
7,200
3.00
5,000
0080:a001
0x0080 (Unknown)
0xa001 (JMS578 based SATA bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 5B 1.0
Raspberry Pi 5 Model B Rev 1.0
Raspberry Pi Foundation
N/A
4
2,400
910 (+10)
2,133

Operating System

Debian GNU/Linux 12 (bookworm)
aarch64

Benchmark Results
100 MB/s
127.65 MB/s
80.81 MB/s
220 IOPS
354 IOPS
881 KB/s
1,419 KB/s
25,268 KB/s
19,179 KB/s
746 KB/s
842 KB/s

inxi Results
System: Kernel: 6.1.0-rpi8-rpi-2712 arch: aarch64 bits: 64 compiler: gcc v: 12.2.0 clocksource: arch_sys_counter parameters: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=2721e93a-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles cfg80211.ieee80211_regdom=ZA cfg80211.ieee80211_regdom=ZA Desktop: KDE Plasma v: 5.27.5 wm: kwin_wayland dm: SDDM Distro: Debian GNU/Linux 12 (bookworm) Machine: Type: ARM System: Raspberry Pi 5 Model B Rev 1.0 details: N/A rev: d04170 Battery: Message: No system battery data found. Is one present? Memory: System RAM: total: 8 GiB available: 7.86 GiB used: 2.93 GiB (37.3%) igpu: 8 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a76 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 4 stepping: 1 Topology: cpus: 1x cores: 4 smt: N/A cache: N/A Speed (MHz): avg: 1600 min/max: 1500/2400 scaling: driver: cpufreq-dt governor: ondemand cores: 1: 1600 2: 1600 3: 1600 4: 1600 bogomips: 432 Features: aes asimd asimddp asimdhp asimdrdm atomics cpuid crc32 dcpop evtstrm fp fphp lrcpc pmull sha1 sha2 Vulnerabilities: Type: gather_data_sampling status: Not affected Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: mmio_stale_data status: Not affected Type: retbleed status: Not affected Type: spec_rstack_overflow status: Not affected Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 mitigation: CSV2, BHB Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2712-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:107c701400 class-ID: hdmi Device-2: bcm2712-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:107c706400 class-ID: hdmi Display: server: X.Org v: 1.22.X.X with: Xwayland v: 22.1.9 compositor: kwin_wayland driver: X: loaded: modesetting unloaded: fbdev dri: vc4 gpu: vc4-drm,vc4_crtc,vc4_dpi,vc4_dsi,vc4_firmware_kms,vc4_hdmi,vc4_hvs,vc4_txp,vc4_v3d,vc4_vec display-ID: :1 screens: 1 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x286mm (20.00x11.26") s-diag: 583mm (22.95") Monitor-1: HDMI-A-1 mapped: XWAYLAND0 model: Dell SE2722H built: 2021 res: 1920x1080 hz: 60 dpi: 81 gamma: 1.2 chroma: red: x: 0.643 y: 0.333 green: x: 0.314 y: 0.627 blue: x: 0.153 y: 0.055 white: x: 0.314 y: 0.329 size: 600x340mm (23.62x13.39") diag: 684mm (26.9") ratio: 16:9 modes: 1920x1080, 1920x1080i, 1600x900, 1280x1024, 1152x864, 1280x720, 1024x768, 800x600, 720x576, 720x576i, 720x480, 720x480i, 640x480, 720x400 API: EGL v: 1.5 hw: drv: broadcom v3d drv: broadcom vc4 platforms: device: 0 egl: 1.4 drv: v3d device: 1 drv: swrast gbm: egl: 1.4 drv: v3d surfaceless: egl: 1.4 drv: v3d x11: egl: 1.4 drv: vc4 inactive: wayland API: OpenGL v: 3.1 vendor: broadcom mesa v: 23.2.1-1~bpo12+rpt3 glx-v: 1.4 es-v: 3.1 direct-render: yes renderer: V3D 7.1 device-ID: 14e4:ffffffff memory: 7.68 GiB unified: yes Audio: Device-1: bcm2712-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:107c701400 class-ID: hdmi Device-2: bcm2712-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:107c706400 class-ID: hdmi API: ALSA v: k6.1.0-rpi8-rpi-2712 status: kernel-api tools: alsactl,alsamixer,amixer Server-1: PipeWire v: 0.3.65 status: n/a (root, process) with: 1: pipewire-pulse status: active 2: wireplumber status: active tools: pw-cat,pw-cli,wpctl Server-2: PulseAudio v: 16.1 status: off (using pipewire-pulse) tools: pacat,pactl Network: Device-1: driver: rp1 v: N/A pcie: gen: 2 speed: 5 GT/s lanes: 4 port: N/A bus-ID: 01:00.0 chip-ID: 1de4:0001 class-ID: 0200 IF: wlan0 state: down mac: IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: noprefixroute scope: link WAN IP: Bluetooth: Device-1: bcm7271-uart driver: bcm7271_uart bus-ID: N/A chip-ID: brcm:107d50c000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 0 state: up address: bt-v: 5.0 lmp-v: 9 sub-v: 6119 hci-v: 9 rev: 17e class-ID: 7c0000 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: peripheral accept service-classes: rendering, capturing, object transfer, audio, telephony Device-2: bcm7271-uart driver: N/A bus-ID: N/A chip-ID: brcm:serial0 class-ID: serial Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 465.76 GiB used: 10.18 GiB (2.2%) ID-1: /dev/sda maj-min: 8:0 model: TO Exter nal USB 3.0 drive model: MQ01ACF050 size: 465.76 GiB block-size: physical: 4096 B logical: 512 B type: USB rev: 3.0 spd: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1 sata: 3.0 speed: 6.0 Gb/s tech: HDD rpm: 7200 fw-rev: 0204 drive-rev: AV001D temp: 36 C scheme: MBR SMART: yes state: enabled health: PASSED on: 1y 278d 20h cycles: 11914 read: 12.26 TiB written: 17.96 TiB Old-Age: UDMA CRC errors: 276381713 alert: Bad cable/connection? Pre-Fail: reallocated sector: 100 threshold: 50 Message: No optical or floppy data found. Partition: ID-1: / raw-size: 465.26 GiB size: 456.88 GiB (98.20%) used: 10.11 GiB (2.2%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: cb6f0e18-5add-4177-ab98-e9f0235e06b3 ID-2: /boot/firmware raw-size: 512 MiB size: 511 MiB (99.80%) used: 72.9 MiB (14.3%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: bootfs uuid: D3E6-3F09 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: no ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 2-0:1 info: super-speed hub ports: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-1:2 info: JMS578 based SATA bridge type: mass storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 power: 896mA chip-ID: 0080:a001 class-ID: 0806 Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Hub-4: 3-2:2 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA chip-ID: 05e3:0610 class-ID: 0900 Device-1: 3-2.1:3 info: Holtek Wired Keyboard (78/79 key) [RPI 5] type: keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s (183 KiB/s) lanes: 1 mode: 1.0 power: 100mA chip-ID: 04d9:0006 class-ID: 0300 Device-2: 3-2.2:4 info: Pixart Imaging Optical Mouse type: mouse driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s (183 KiB/s) lanes: 1 mode: 1.0 power: 100mA chip-ID: 093a:2510 class-ID: 0301 Hub-5: 4-0:1 info: super-speed hub ports: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900 Sensors: System Temperatures: cpu: 47.4 C mobo: N/A Fan Speeds (rpm): N/A Repos: Packages: pm: dpkg pkgs: 2538 libs: 1495 tools: apt,apt-get Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian bookworm main contrib non-free non-free-firmware 2: deb http: //deb.debian.org/debian-security/ bookworm-security main contrib non-free non-free-firmware 3: deb http: //deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware Active apt repos in: /etc/apt/sources.list.d/brave-browser-release.list 1: deb [signed-by=/usr/share/keyrings/brave-browser-archive-keyring.gpg] https: //brave-browser-apt-release.s3.brave.com/ stable main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.com/debian/ bookworm main Active apt repos in: /etc/apt/sources.list.d/teamviewer.list 1: deb [signed-by=/usr/share/keyrings/teamviewer-keyring.gpg] https: //linux.teamviewer.com/deb stable main Processes: CPU top: 5 of 241 1: cpu: 8.5% command: brave pid: 1963 mem: 300.9 MiB (3.7%) 2: cpu: 4.8% command: brave pid: 1554 mem: 437.5 MiB (5.4%) 3: cpu: 3.4% command: brave pid: 2115 mem: 244.7 MiB (3.0%) 4: cpu: 2.7% command: brave pid: 2168 mem: 206.6 MiB (2.5%) 5: cpu: 2.6% command: brave pid: 2056 mem: 208.3 MiB (2.5%) Memory top: 5 of 241 1: mem: 437.5 MiB (5.4%) command: brave pid: 1554 cpu: 4.8% 2: mem: 303.6 MiB (3.7%) command: plasmashell pid: 1363 cpu: 1.8% 3: mem: 300.9 MiB (3.7%) command: brave pid: 1963 cpu: 8.5% 4: mem: 245.3 MiB (3.0%) command: brave pid: 1794 cpu: 2.3% 5: mem: 244.7 MiB (3.0%) command: brave pid: 2115 cpu: 3.4% Info: Processes: 241 Uptime: 10m Init: systemd v: 252 target: graphical (5) default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12 Client: shell wrapper v: 5.2.15-release inxi: 3.3.31

inxi Results

System:
  Kernel: 6.1.0-rpi8-rpi-2712 arch: aarch64 bits: 64 compiler: gcc v: 12.2.0
    clocksource: arch_sys_counter parameters: reboot=w coherent_pool=1M 8250.nr_uarts=1
    pci=pcie_bus_safe snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1
    smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000
    console=ttyAMA10,115200 console=tty1 root=PARTUUID=2721e93a-02 rootfstype=ext4 fsck.repair=yes
    rootwait quiet splash plymouth.ignore-serial-consoles cfg80211.ieee80211_regdom=ZA
    cfg80211.ieee80211_regdom=ZA
  Desktop: KDE Plasma v: 5.27.5 wm: kwin_wayland dm: SDDM Distro: Debian GNU/Linux 12 (bookworm)
Machine:
  Type: ARM System: Raspberry Pi 5 Model B Rev 1.0 details: N/A rev: d04170 Battery:
  Message: No system battery data found. Is one present?
Memory:
  System RAM: total: 8 GiB available: 7.86 GiB used: 2.93 GiB (37.3%) igpu: 8 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a76 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 4
    stepping: 1
  Topology: cpus: 1x cores: 4 smt: N/A cache: N/A
  Speed (MHz): avg: 1600 min/max: 1500/2400 scaling: driver: cpufreq-dt governor: ondemand cores:
    1: 1600 2: 1600 3: 1600 4: 1600 bogomips: 432
  Features: aes asimd asimddp asimdhp asimdrdm atomics cpuid crc32 dcpop evtstrm fp fphp lrcpc
    pmull sha1 sha2
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 mitigation: CSV2, BHB
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2712-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:107c701400
    class-ID: hdmi
  Device-2: bcm2712-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:107c706400
    class-ID: hdmi
  Display: server: X.Org v: 1.22.X.X with: Xwayland v: 22.1.9 compositor: kwin_wayland driver: X:
    loaded: modesetting unloaded: fbdev dri: vc4
    gpu: vc4-drm,vc4_crtc,vc4_dpi,vc4_dsi,vc4_firmware_kms,vc4_hdmi,vc4_hvs,vc4_txp,vc4_v3d,vc4_vec
    display-ID: :1 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x286mm (20.00x11.26") s-diag: 583mm (22.95")
  Monitor-1: HDMI-A-1 mapped: XWAYLAND0 model: Dell SE2722H built: 2021
    res: 1920x1080 hz: 60 dpi: 81 gamma: 1.2 chroma: red: x: 0.643 y: 0.333 green: x: 0.314 y: 0.627
    blue: x: 0.153 y: 0.055 white: x: 0.314 y: 0.329 size: 600x340mm (23.62x13.39")
    diag: 684mm (26.9") ratio: 16:9 modes: 1920x1080, 1920x1080i, 1600x900, 1280x1024, 1152x864,
    1280x720, 1024x768, 800x600, 720x576, 720x576i, 720x480, 720x480i, 640x480, 720x400
  API: EGL v: 1.5 hw: drv: broadcom v3d drv: broadcom vc4 platforms: device: 0 egl: 1.4 drv: v3d
    device: 1 drv: swrast gbm: egl: 1.4 drv: v3d surfaceless: egl: 1.4 drv: v3d x11: egl: 1.4
    drv: vc4 inactive: wayland
  API: OpenGL v: 3.1 vendor: broadcom mesa v: 23.2.1-1~bpo12+rpt3 glx-v: 1.4 es-v: 3.1
    direct-render: yes renderer: V3D 7.1 device-ID: 14e4:ffffffff memory: 7.68 GiB unified: yes
Audio:
  Device-1: bcm2712-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:107c701400 class-ID: hdmi
  Device-2: bcm2712-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:107c706400 class-ID: hdmi
  API: ALSA v: k6.1.0-rpi8-rpi-2712 status: kernel-api tools: alsactl,alsamixer,amixer
  Server-1: PipeWire v: 0.3.65 status: n/a (root, process) with: 1: pipewire-pulse status: active
    2: wireplumber status: active tools: pw-cat,pw-cli,wpctl
  Server-2: PulseAudio v: 16.1 status: off (using pipewire-pulse) tools: pacat,pactl
Network:
  Device-1: driver: rp1 v: N/A pcie: gen: 2 speed: 5 GT/s lanes: 4 port: N/A bus-ID: 01:00.0
    chip-ID: 1de4:0001 class-ID: 0200
  IF: wlan0 state: down mac: 
  IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: 
  IP v4:  type: dynamic noprefixroute scope: global broadcast: 
  IP v6:  type: noprefixroute scope: link
  WAN IP: 
Bluetooth:
  Device-1: bcm7271-uart driver: bcm7271_uart bus-ID: N/A chip-ID: brcm:107d50c000 class-ID: serial
  Report: hciconfig ID: hci0 rfk-id: 0 state: up address:  bt-v: 5.0 lmp-v: 9 sub-v: 6119
    hci-v: 9 rev: 17e class-ID: 7c0000
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: peripheral accept
    service-classes: rendering, capturing, object transfer, audio, telephony
  Device-2: bcm7271-uart driver: N/A bus-ID: N/A chip-ID: brcm:serial0 class-ID: serial
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 465.76 GiB used: 10.18 GiB (2.2%)
  ID-1: /dev/sda maj-min: 8:0 model: TO Exter nal USB 3.0 drive model: MQ01ACF050
    size: 465.76 GiB block-size: physical: 4096 B logical: 512 B type: USB rev: 3.0 spd: 5 Gb/s
    lanes: 1 mode: 3.2 gen-1x1 sata: 3.0 speed: 6.0 Gb/s tech: HDD rpm: 7200 fw-rev: 0204 drive-rev: AV001D temp: 36 C scheme: MBR
  SMART: yes state: enabled health: PASSED on: 1y 278d 20h cycles: 11914 read: 12.26 TiB
    written: 17.96 TiB Old-Age: UDMA CRC errors: 276381713 alert: Bad cable/connection? Pre-Fail:
    reallocated sector: 100 threshold: 50
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 465.26 GiB size: 456.88 GiB (98.20%) used: 10.11 GiB (2.2%) fs: ext4
    block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs
    uuid: cb6f0e18-5add-4177-ab98-e9f0235e06b3
  ID-2: /boot/firmware raw-size: 512 MiB size: 511 MiB (99.80%) used: 72.9 MiB (14.3%) fs: vfat
    block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: bootfs uuid: D3E6-3F09
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: no
  ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
    lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 2-0:1 info: super-speed hub ports: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1
    mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900
  Device-1: 2-1:2 info: JMS578 based SATA bridge type: mass storage driver: uas interfaces: 1
    rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 power: 896mA chip-ID: 0080:a001
    class-ID: 0806 Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
    lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900
  Hub-4: 3-2:2 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1
    mode: 2.0 power: 100mA chip-ID: 05e3:0610 class-ID: 0900
  Device-1: 3-2.1:3 info: Holtek Wired Keyboard (78/79 key) [RPI 5] type: keyboard,HID
    driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s (183 KiB/s) lanes: 1 mode: 1.0
    power: 100mA chip-ID: 04d9:0006 class-ID: 0300
  Device-2: 3-2.2:4 info: Pixart Imaging Optical Mouse type: mouse driver: hid-generic,usbhid
    interfaces: 1 rev: 1.1 speed: 1.5 Mb/s (183 KiB/s) lanes: 1 mode: 1.0 power: 100mA
    chip-ID: 093a:2510 class-ID: 0301
  Hub-5: 4-0:1 info: super-speed hub ports: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1
    mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
  System Temperatures: cpu: 47.4 C mobo: N/A
  Fan Speeds (rpm): N/A
Repos:
  Packages: pm: dpkg pkgs: 2538 libs: 1495 tools: apt,apt-get
  Active apt repos in: /etc/apt/sources.list
    1: deb http: //deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http: //deb.debian.org/debian-security/ bookworm-security main contrib non-free non-free-firmware
    3: deb http: //deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/brave-browser-release.list
    1: deb [signed-by=/usr/share/keyrings/brave-browser-archive-keyring.gpg] https: //brave-browser-apt-release.s3.brave.com/ stable main
  Active apt repos in: /etc/apt/sources.list.d/raspi.list
    1: deb http: //archive.raspberrypi.com/debian/ bookworm main
  Active apt repos in: /etc/apt/sources.list.d/teamviewer.list
    1: deb [signed-by=/usr/share/keyrings/teamviewer-keyring.gpg] https: //linux.teamviewer.com/deb stable main
Processes:
  CPU top: 5 of 241
  1: cpu: 8.5% command: brave pid: 1963 mem: 300.9 MiB (3.7%)
  2: cpu: 4.8% command: brave pid: 1554 mem: 437.5 MiB (5.4%)
  3: cpu: 3.4% command: brave pid: 2115 mem: 244.7 MiB (3.0%)
  4: cpu: 2.7% command: brave pid: 2168 mem: 206.6 MiB (2.5%)
  5: cpu: 2.6% command: brave pid: 2056 mem: 208.3 MiB (2.5%)
  Memory top: 5 of 241
  1: mem: 437.5 MiB (5.4%) command: brave pid: 1554 cpu: 4.8%
  2: mem: 303.6 MiB (3.7%) command: plasmashell pid: 1363 cpu: 1.8%
  3: mem: 300.9 MiB (3.7%) command: brave pid: 1963 cpu: 8.5%
  4: mem: 245.3 MiB (3.0%) command: brave pid: 1794 cpu: 2.3%
  5: mem: 244.7 MiB (3.0%) command: brave pid: 2115 cpu: 3.4%
Info:
  Processes: 241 Uptime: 10m Init: systemd v: 252 target: graphical (5) default: graphical
  tool: systemctl Compilers: gcc: 12.2.0 alt: 12 Client: shell wrapper v: 5.2.15-release
  inxi: 3.3.31

Benchmark #79160 - Brand: Toshiba Canvio 2.5" MQ Series