Benchmark #7937 - pibenchmarks.com

Brand: Kingston SSDNow V300
SSD (2.5" SATA)
#61 / 1,700
317
#668 / 1,700
#643 / 989
#167 / 370
6,198
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-02-01 10:18:55
#7,937
3,020
-3,178 (-105.23%)
Anonymous

Storage Details
Kingston SSDNow V300
SSD (2.5" SATA)
120G
SSD
Kingston
SV300S37A120G
SATA
2.00
480
152d:1561
0x152d (JMicron Technology Corp. / JMicron USA Technology Corp.)
0x1561
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B+ 1.3
Raspberry Pi 3 Model B Plus Rev 1.3
Raspberry Pi Foundation
1,400
250 (-150)
450 (-50)

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
32.1 MB/s
27.41 MB/s
27.78 MB/s
3,403 IOPS
2,955 IOPS
13,612 KB/s
11,821 KB/s
13,756 KB/s
12,451 KB/s
11,652 KB/s
15,060 KB/s

inxi Results
System: Host: domoticz Kernel: 4.19.97-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty1 root=PARTUUID=d9b3f436-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 Memory: RAM: total: 1002.1 MiB used: 319.7 MiB (31.9%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 4: 1400 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: N/A tty: 119x27 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7+ Network: Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:7 chip ID: 0424:7800 IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-1: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 111.79 GiB used: 4.06 GiB (3.6%) ID-1: /dev/sda type: USB model: SABRENT SABRENT size: 111.79 GiB block size: physical: 512 B logical: 512 B rev: 0204 scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 111.54 GiB size: 109.75 GiB (98.40%) used: 4.01 GiB (3.7%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 24eaa08b-10f2-49e0-8283-359f7eb1a0b6 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 69D5-9B27 ID-3: /mnt/nas raw size: N/A size: 5.23 TiB used: 3.79 TiB (72.4%) fs: nfs remote: 10.0.X.X:/volume1/media label: N/A uuid: N/A Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Device-1: 1-1.1.1:7 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 Device-2: 1-1.1.2:5 info: JMicron / JMicron USA JMS561U two ports SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 152d:1561 Device-3: 1-1.1.3:6 info: Sigma Designs Aeotec Z-Stick Gen5 (ZW090) - UZB type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 0658:0200 Device-4: 1-1.2:4 info: Arduino SA Mega 2560 R3 (CDC ACM) type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 1.1 speed: 12 Mb/s chip ID: 2341:0042 Device-5: 1-1.3:8 info: American Power Conversion Uninterruptible Power Supply type: HID driver: usbfs interfaces: 1 rev: 1.1 speed: 1.5 Mb/s chip ID: 051d:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 4.4% command: domoticz pid: 503 mem: 62.7 MiB (6.7%) 2: cpu: 4.4% command: [kworker/1:1-mm_percpu_wq] pid: 9023 mem: 0.00 MiB (0.0%) 3: cpu: 4.1% command: [kworker/1:3-events] pid: 17283 mem: 0.00 MiB (0.0%) 4: cpu: 0.5% command: smartd pid: 18586 mem: 3.13 MiB (0.3%) 5: cpu: 0.4% command: -bash pid: 17892 mem: 3.55 MiB (0.3%) Memory top: 5 1: mem: 62.7 MiB (6.7%) command: domoticz pid: 503 cpu: 4.4% 2: mem: 49.9 MiB (5.3%) command: rpc.statd pid: 9475 cpu: 0.0% 3: mem: 27.9 MiB (3.0%) command: miio_server.py started by: python3 pid: 696 cpu: 0.0% 4: mem: 19.7 MiB (2.1%) command: miio_server.py started by: python3 pid: 442 cpu: 0.0% 5: mem: 13.9 MiB (1.5%) command: start.py started by: python3 pid: 638 cpu: 0.0% Info: Processes: 137 Uptime: 6h 40m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: domoticz Kernel: 4.19.97-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=1920 
           bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty1 
           root=PARTUUID=d9b3f436-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           quiet splash plymouth.ignore-serial-consoles 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 
           rev: a020d3 Memory:    RAM: total: 1002.1 MiB used: 319.7 MiB (31.9%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 
           Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 
           4: 1400 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: N/A tty: 119x27 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7+ 
Network:   Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:7 
           chip ID: 0424:7800 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-1: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 111.79 GiB used: 4.06 GiB (3.6%) 
           ID-1: /dev/sda type: USB model: SABRENT SABRENT size: 111.79 GiB block size: 
           physical: 512 B logical: 512 B rev: 0204 scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 111.54 GiB size: 109.75 GiB (98.40%) used: 4.01 GiB (3.7%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 24eaa08b-10f2-49e0-8283-359f7eb1a0b6 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 69D5-9B27 
           ID-3: /mnt/nas raw size: N/A size: 5.23 TiB used: 3.79 TiB (72.4%) fs: nfs 
           remote: 10.0.X.X:/volume1/media label: N/A uuid: N/A 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Device-1: 1-1.1.1:7 info: Standard Microsystems type: Network driver: lan78xx 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 
           Device-2: 1-1.1.2:5 info: JMicron / JMicron USA JMS561U two ports SATA 6Gb/s bridge 
           type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s 
           chip ID: 152d:1561 Device-3: 1-1.1.3:6 info: Sigma Designs Aeotec Z-Stick Gen5 (ZW090) - UZB 
           type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s 
           chip ID: 0658:0200 
           Device-4: 1-1.2:4 info: Arduino SA Mega 2560 R3 (CDC ACM) 
           type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 1.1 speed: 12 Mb/s 
           chip ID: 2341:0042 Device-5: 1-1.3:8 info: American Power Conversion Uninterruptible Power Supply 
           type: HID driver: usbfs interfaces: 1 rev: 1.1 speed: 1.5 Mb/s chip ID: 051d:0002 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 4.4% command: domoticz pid: 503 mem: 62.7 MiB (6.7%) 
           2: cpu: 4.4% command: [kworker/1:1-mm_percpu_wq] pid: 9023 mem: 0.00 MiB (0.0%) 
           3: cpu: 4.1% command: [kworker/1:3-events] pid: 17283 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.5% command: smartd pid: 18586 mem: 3.13 MiB (0.3%) 
           5: cpu: 0.4% command: -bash pid: 17892 mem: 3.55 MiB (0.3%) 
           Memory top: 5 
           1: mem: 62.7 MiB (6.7%) command: domoticz pid: 503 cpu: 4.4% 
           2: mem: 49.9 MiB (5.3%) command: rpc.statd pid: 9475 cpu: 0.0% 
           3: mem: 27.9 MiB (3.0%) command: miio_server.py started by: python3 pid: 696 cpu: 0.0% 
           4: mem: 19.7 MiB (2.1%) command: miio_server.py started by: python3 pid: 442 cpu: 0.0% 
           5: mem: 13.9 MiB (1.5%) command: start.py started by: python3 pid: 638 cpu: 0.0% 
Info:      Processes: 137 Uptime: 6h 40m Init: systemd v: 241 runlevel: 3 
           target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper 
           v: 5.0.3-release inxi: 3.0.37

Benchmark #7937 - Brand: Kingston SSDNow V300